Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: UD4P BSOD & Overclock help!




  1. #1
    Join Date
    Mar 2009
    Posts
    36

    Default UD4P BSOD & Overclock help!

    My cpu has been running perfectly at 3.7Ghz for a few months now until 2 days ago when I had a BSOD (PAGE_FAULT_IN_NON_PAGED_AREA) out of the blue. I had to reset cmos to get the pc to boot as it kept giving me a blue screen each time I tried to boot.

    I ran Memtest & chkdsk - no problems. I've reset my original overclock and its running fine at the moment. I'll stress test it tonight but wondered if someone would cast their eye over my settings and see if anything i here might cause a BSOD.. I has originally stress tested the o/c at length so a bit baffled why it would suddenly stop working on me. I did notice some errors from superantispyware in the Vista event manager but not sure if they were anything to do with my BSOD, I un-installed in anyway, just in case!

    Here are my settings: Do you think my DRAM should be set manually..?

    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 13

    Isonchronous Frequency ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[180]
    PCI Express Frequency (MHz) ........... [100]
    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    System Memory Multiplier (SPD) ........ [Manual] 6
    DRAM Timing Selectable (SPD) .......... [AUTO]

    Memory Frequency 1066 1400

    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................1.31
    QPI/VTT Voltage 1.150v ............1.125

    CPU PLL 1.800v .......................1.84

    MCH/ICH
    PCIE 1.500v ...........................1.5 [AUTO]
    QPI PLL 1.100v .......................1.24
    IOH Core 1.100v .....................1.14
    ICH I/O 1.500v .......................1.5 [AUTO]
    ICH Core 1.1v ........................1.14

    DRAM (ALL AUTO)
    DRAM Voltage 1.500v ..............1.5 [AUTO]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]



    System:
    Vista 64 SP2
    Gigabyte X58 UD4P
    i7 920 @ 3.7Ghz
    6GB (3x2GB) Corsair XMS3, DDR3 PC3-10666
    ATI HD4850
    Corsair HX520 PSU
    Samsung F1 500Gb + other drives
    Last edited by dangermoose; 08-30-2009 at 05:21 AM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: UD4P BSOD & Overclock help!

    Yes, I would set things manually with XMP Disabled. You may need to use Uncore x14, but x13 may be ok and you just may need a little bit more QPI Voltage or IOH Core

    I would also set your ram voltage manually, especially if it should be 1.65V, if so set 1.64 or 1.66

  3. #3
    Join Date
    Mar 2009
    Posts
    36

    Default Re: UD4P BSOD & Overclock help!

    Quote Originally Posted by Lsdmeasap View Post
    Yes, I would set things manually with XMP Disabled. You may need to use Uncore x14, but x13 may be ok and you just may need a little bit more QPI Voltage or IOH Core

    I would also set your ram voltage manually, especially if it should be 1.65V, if so set 1.64 or 1.66
    Many thanks again Lsdmeasap. I've set as u suggested (although my ram is to be set at 1.5V according to their specs)..

    Uncore 13 seems ok so far but I need to stress test more thoroughly. I've also set my rams timings as per an earlier thread I had (where you suggested this) as the bios never reads my timings correctly.

    The only thing I'm confused on is disabling 'xmp' as I cant find this in the bios! I'm on version '9c' as far as I can remember..

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: UD4P BSOD & Overclock help!

    Well then set 1.5 or so, I just said 1.64-1.66 as that is the norm for X58 ram and you never linked your ram so I was just saying in general to set your ram voltage

    XMP Settings is memory specific, your ram just may not have this programmed into it not all memory does. It would be here if your ram has it, if not the setting would not appear >>
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]

  5. #5
    Join Date
    Mar 2009
    Posts
    36

    Default Re: UD4P BSOD & Overclock help!

    Quote Originally Posted by Lsdmeasap View Post
    Well then set 1.5 or so, I just said 1.64-1.66 as that is the norm for X58 ram and you never linked your ram so I was just saying in general to set your ram voltage

    XMP Settings is memory specific, your ram just may not have this programmed into it not all memory does. It would be here if your ram has it, if not the setting would not appear >>
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]
    Thanks for that.. My ram is here: (pdf from corsair site)
    No mention of xmp that I can see in the specs..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •