Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 10 123 ... LastLast
Results 1 to 10 of 96

Thread: EP45-UD3LR BIOS help overclock error message




  1. #1
    MadMax2911's Avatar
    MadMax2911 is offline Member
    Join Date
    Dec 2008
    Location
    Southern CA
    Posts
    369

    Default EP45-UD3LR BIOS help overclock error message

    Hi its me again, I just need some clarification on some BIOS setting for a quad core CPU. I have most settings set due to past posts and info I have learnt on this forum(misspelling on purpose) :) But I keep getting the overclocking notice when entering the BIOS most times but not all time. I am not overclocking, but I am still getting the message thats strange.
    The one setting that worries me is in advanced clock control section. The setting that are default are 700 700 and 0 0 ?
    I thought that they were suposed to be 800 900 0 and 0 like in this post over here. http://forums.tweaktown.com/f69/ga-e...-issues-32982/
    I believe I tried to change the values once and I go the beeping sounds that prevented boot up and just kept restarting over and over again. I had to reset the BIOS and then the values were back at 700 700 0 and 0.??
    What is happening here anyone able to help me???
    I am working on printing the BIOS paper to edit in later
    Thanks all

    My Summary for the Audience

    Initial Problem and explaination : post 1
    Various Questions from the Crew and realization that this is not OCing memory. -sec 1, posts 2-10

    Debated about which Memory to puchase with the crew. Linked to other post about corrupt registry.
    sec 2, - Posts: 11-20

    Various BIOS settings questions and BIOS version questions Antivirus compatibility issues and questions answered - sec 3, posts: 21-30

    Various unrelated questions asked and answered then recieved the recomended BIOS settings from L the man. BIOS update to F7 and the problems that followed afterward. -sec 4, posts: 31-40

    Reading the Overclock guide and recording the baseline, creating a FAT-16,32 partition. Increased the V-core to 1.26 and continued testing, tried increasing MCH volts. Reposting BIOS settings for the crew. -sec 5, Posts: 41-50

    Commenting on the WD hard drive(recertified) and the change in Intel AHCI BIOS version from 1.07 to 1.20. The update to a higher INTEL BIOS causing problems is indicated here. Eventually directed to perform memory tests with memtest64+ -sec 6, Posts 51-60.

    Testing with memtest64. Forced to add a fan near the 8800 GTS graphics card to remove extra heat for the system and cool the south bridge. Memtest and prime95 testing for stability meets with success. investigating BSOD's and various devices IDE CD/DVD ROM, Rivatuner problems uninstalled various applications. Eventually reinstalled on a better hard drive from Seagate. Testing continues with success. -sec 7, Posts 51-70
    Last edited by MadMax2911; 11-21-2009 at 09:02 PM. Reason: edit in index and update
    BUILD #2 GA-EP45-DS3R [Rev1.0] BIOS Flashed F11e, CPU=INTEL Core2 Quad Q8200 Yorkfield-4M LGA 775 with Mugen2 cooler RAM= Mushkin 996599 link 2 x 2GB, Hard drive=WD 6400AAKS, DVD=HP dvd1160i OS=Win 7 SP1 64 bit Video=BFG 8800GTS OC edition CASE=Thermaltake Tsunami Dream P.S.=Antec TP3-650

    Build #3 GA-EP45-UD3LR__rev 1.0__ BIOS F11, CPU Core2 Duo E8400 3.157GHz WMugen2 Cooler, Power Supply: Antec EA-500D 500 W, RAM: Corsair 2 GB Hard Drive: WD 160 GB OS: Win XP SP3 Video: MSI GTS450 2GB




  2. #2
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: EP45-UD3LR BIOS help overclock error message

    Did you initially load OPTIMIZED bios settings before you changed any bios settings?
    The suggestions in this post should help you get started in the right direction.
    If you're still having problems, be sure to post your bios settings.
    Be sure to include a link to your memory's specs.

    Whenever you reset/clear the CMOS, you MUST reload OPTIMIZED settings, save settings and exit, and then re-enter the bios to make your bios changes.
    Whenever I've had to clear the CMOS, I always load OPTIMIZED settings before I load one of my saved bios profiles.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #3
    MadMax2911's Avatar
    MadMax2911 is offline Member
    Join Date
    Dec 2008
    Location
    Southern CA
    Posts
    369

    Default Re: EP45-UD3LR BIOS help overclock error message

    Quote Originally Posted by profJim View Post
    Did you initially load OPTIMIZED bios settings before you changed any bios settings?
    The suggestions in this post should help you get started in the right direction.
    If you're still having problems, be sure to post your bios settings.
    Be sure to include a link to your memory's specs.

    Whenever you reset/clear the CMOS, you MUST reload OPTIMIZED settings, save settings and exit, and then re-enter the bios to make your bios changes.
    Whenever I've had to clear the CMOS, I always load OPTIMIZED settings before I load one of my saved bios profiles.
    Question 1 answer is I may have not loaded optimized settings all the time and may have just changed the settings or loaded from the saved BIOS area. I had thought that I would load optimized after a flash only. But I guess I am wrong there too. Thanks for the info too.


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 7x
    Fine CPU Clock Ratio.....................:.N/A0
    CPU Frequency ...........................:N/A

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] enabled
    CPU Host Frequency (Mhz) ............:...333MHz
    PCI Express Frequency (Mhz) .........:Set to 100... 100

    C.I.A.2 .................................:[Disabled]..disabled


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800.. 800
    PCI Express Clock Drive.................: <<< 900.. 800
    CPU Clock Skew (ps)....................: <<< 0
    MCH Clock Skew (ps)...................: <<< 0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]..standard
    Extreme Memory Profile (X.M.P.).....: Disabled.. N/A
    (G)MCH Frequency Latch...............: [Auto].. auto
    System Memory Multiplier ..............: ..auto
    Memory Frequency (Mhz) ..............: ..800
    DRAM Timing Selectable ................: [Manual]manual.

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD...........................................3
    tWTR..........................................3
    tWR............................................6
    tRFC...........................................52
    tRTP...........................................3
    Command Rate (CMD) ....................:1?? or 2 for normal speeds?

    Driving Strength Profiles
    Driving Strength ...........................auot or set to 800 MHz?

    Channel A
    Static tRead Value.........................:7 auto now but could set to 6?
    MCH
    tRD Phase0 Adjustment...................:Auto <<<Left at auto far all below
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:7auto

    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... manual
    CPU
    CPU Vcore….……….........................:1.25v

    CPU Termination…..... 1.200V*.......:1.20v << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore. Auto is fine if not overclocking

    CPU PLL…………………....1.500V*.......:1.55v << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.5-1.65. Auto is fine if not overclocking

    CPU Referen.…………....0.755V*.......:..805v <<< .64% Of Vtt (Termination above) Auto Will set this correctly

    CPU Reference2………,,0.800V*.......:Not Aplicable<<< .67% Of Vtt (Termination above) Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........:1.10v <<
    MCH Reference….…….0.800V...........;0.76v <<<
    MCH/DRAM Ref.…......0.900V...........:N/A <<< Leave
    ICH I/O……………….....1.500V............: 1.55v<< Leave
    ICH Core…………...……1.100V............: 1.1v<<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 1.8v
    DRAM Termination .…0.900V............: <<< LeaveN/A
    Channel A Reference 0.900V............: <<< LeaveN/A
    Channel B Reference 0.900V............: <<< LeaveN/A

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]disabled
    No-Execute Memory Protect............: [Enabled]enabled
    CPU Enhanced Halt (C1E)................: [Disabled]enabled
    C2/C2E State Support....................: [Disabled]enabled
    x C4/C4E State Support..................: [Disabled]enabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]enabled
    CPU EIST Function.........................: [Disabled]enabled
    Virtualization Technology................: [Disabled] disabled Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] disabled

    $$$$$$$$$$$$$$$$$$$$$$$$$$$****************$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$$
    I am editing this morning so all values may not appear correct
    $$$$$$$$$$$$$$$$$$$$$$$$$$$*****************$$$$$$ $$$$$$$$$$$$$$$$$$$$$
    Thanks for all help
    Last edited by MadMax2911; 08-30-2009 at 11:23 PM. Reason: add info
    BUILD #2 GA-EP45-DS3R [Rev1.0] BIOS Flashed F11e, CPU=INTEL Core2 Quad Q8200 Yorkfield-4M LGA 775 with Mugen2 cooler RAM= Mushkin 996599 link 2 x 2GB, Hard drive=WD 6400AAKS, DVD=HP dvd1160i OS=Win 7 SP1 64 bit Video=BFG 8800GTS OC edition CASE=Thermaltake Tsunami Dream P.S.=Antec TP3-650

    Build #3 GA-EP45-UD3LR__rev 1.0__ BIOS F11, CPU Core2 Duo E8400 3.157GHz WMugen2 Cooler, Power Supply: Antec EA-500D 500 W, RAM: Corsair 2 GB Hard Drive: WD 160 GB OS: Win XP SP3 Video: MSI GTS450 2GB




  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3LR BIOS help overclock error message

    Please start all over, and load and apply optimized defaults and go from there. Do not use any of your older BIOS Profiles. I suggest you go in and "blank" their names out as to erase them so you don't try to use them anymore

    You are not using optimized now, so I suggest you load that then let us know how you get along and or if you need further help.

    Of course, set your ram voltage manually after doing that

  5. #5
    MadMax2911's Avatar
    MadMax2911 is offline Member
    Join Date
    Dec 2008
    Location
    Southern CA
    Posts
    369

    Default Re: EP45-UD3LR BIOS help overclock error message

    Quote Originally Posted by Lsdmeasap View Post
    Please start all over, and load and apply optimized defaults and go from there. Do not use any of your older BIOS Profiles. I suggest you go in and "blank" their names out as to erase them so you don't try to use them anymore

    You are not using optimized now, so I suggest you load that then let us know how you get along and or if you need further help.

    Of course, set your ram voltage manually after doing that
    About the BIOS I tried loading the optimized defaults and that got me the settings I needed for the advanced clock control which I think may have contributed to the problem. I also reflashed the BIOS with the BIOS from gigabyte just to be sure and that erased all the saved settings anyway.
    Yes I did load optimized defaults as soon as I flashed and also when Prof Jim told me to . Optimized defaults did help thank you.
    Yes set RAM voltage to 1.8 as well as all other voltages to non auto settings as they tend to overvolt as I have heard.
    will get the link to RAM as fast as I can but i think I have been here before in my 8i945 mobo post with same ram here is a link to make it easy http://forums.tweaktown.com/f69/8i94...e-eek-_-31652/

    here is the best link I can find for the memory that may not be listed anymore ??
    http://www.supertalent.com/products/...indByType.y=16

    This may be the better link as its not overclocking memory
    http://www.supertalent.com/products/...indByType.y=10
    EDIT the ram model number is T800UA1GC5 and below it says this STT DDR2-800 1G/128x8 CL5 PC6400 Blue heatspreader value (RAM) USM090218002 RoHS I will test the RAM if that is what is needed.

    Thanks L you the man
    Last edited by MadMax2911; 08-31-2009 at 10:04 PM. Reason: more info
    BUILD #2 GA-EP45-DS3R [Rev1.0] BIOS Flashed F11e, CPU=INTEL Core2 Quad Q8200 Yorkfield-4M LGA 775 with Mugen2 cooler RAM= Mushkin 996599 link 2 x 2GB, Hard drive=WD 6400AAKS, DVD=HP dvd1160i OS=Win 7 SP1 64 bit Video=BFG 8800GTS OC edition CASE=Thermaltake Tsunami Dream P.S.=Antec TP3-650

    Build #3 GA-EP45-UD3LR__rev 1.0__ BIOS F11, CPU Core2 Duo E8400 3.157GHz WMugen2 Cooler, Power Supply: Antec EA-500D 500 W, RAM: Corsair 2 GB Hard Drive: WD 160 GB OS: Win XP SP3 Video: MSI GTS450 2GB




  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3LR BIOS help overclock error message

    So you still have this problematic ram? Why?

    I need an exact link or model #. Can you give me the model # off the sticker and also post a CPU-z screenshot of the SPD Tab

    Non Auto? What do you mean by that? Most all settings can be left in Auto if you are not overclocking then, if you set them to what you see on the left in the BIOS or Normal then this may add to your issues. Please use Auto for all settings you are not sure about or have not been advised about

    Once we can find your ram info I can advise you some full settings that should give you no issues at stock.... If this ram is not faulty or incompatible

  7. #7
    MadMax2911's Avatar
    MadMax2911 is offline Member
    Join Date
    Dec 2008
    Location
    Southern CA
    Posts
    369

    Default Re: EP45-UD3LR BIOS help overclock error message

    Quote Originally Posted by Lsdmeasap View Post
    So you still have this problematic ram? Why?

    I need an exact link or model #. Can you give me the model # off the sticker and also post a CPU-z screenshot of the SPD Tab

    Non Auto? What do you mean by that? Most all settings can be left in Auto if you are not overclocking then, if you set them to what you see on the left in the BIOS or Normal then this may add to your issues. Please use Auto for all settings you are not sure about or have not been advised about

    Once we can find your ram info I can advise you some full settings that should give you no issues at stock.... If this ram is not faulty or incompatible
    Hi thanks for your reply I am looking for the data sheets that I got from the Supertalent Rep and will run memtest soon. RAM infor was edited in to the post above. more later sorry man
    Max out
    BUILD #2 GA-EP45-DS3R [Rev1.0] BIOS Flashed F11e, CPU=INTEL Core2 Quad Q8200 Yorkfield-4M LGA 775 with Mugen2 cooler RAM= Mushkin 996599 link 2 x 2GB, Hard drive=WD 6400AAKS, DVD=HP dvd1160i OS=Win 7 SP1 64 bit Video=BFG 8800GTS OC edition CASE=Thermaltake Tsunami Dream P.S.=Antec TP3-650

    Build #3 GA-EP45-UD3LR__rev 1.0__ BIOS F11, CPU Core2 Duo E8400 3.157GHz WMugen2 Cooler, Power Supply: Antec EA-500D 500 W, RAM: Corsair 2 GB Hard Drive: WD 160 GB OS: Win XP SP3 Video: MSI GTS450 2GB




  8. #8
    MadMax2911's Avatar
    MadMax2911 is offline Member
    Join Date
    Dec 2008
    Location
    Southern CA
    Posts
    369

    Default Re: EP45-UD3LR BIOS help overclock error message

    Quote Originally Posted by Lsdmeasap View Post
    Please start all over, and load and apply optimized defaults and go from there. Do not use any of your older BIOS Profiles.
    You are not using optimized now, so I suggest you load that then let us know how you get along and or if you need further help.
    I changed the Values in the BIOS to Optimized Defaults and will list the values when I get a chance,Done. Check No old BIOS profiles will be used. Check Running optimized and testing with whatever tests I have installed.
    So you still have this problematic ram? Why?
    Answer, the problem in the past was that my other 8I945P mobo had a slower memory speed than the memory I purchased. I believe that I solved that problem with various settings to limit the ram speed to 667 Mhz. I need to remove one stick and will test with memtest very soon. I would have done it last night but I fell asleep LOL. .
    I need an exact link or model #. Can you give me the model # off the sticker and also post a CPU-z screenshot of the SPD Tab
    Done--->>>>> model number is T800UA1GC5 and below it says this STT DDR2-800 1G/128x8 CL5 PC6400 Blue heatspreader value (RAM) USM090218002 RoHS.
    Here is the Ram information that you requested in attachment. Sorry I can not attach the file as its already attached to the other post. I was denied the upload. here is the link http://forums.tweaktown.com/f69/8i94...e-eek-_-31652/ its down near the middle of the first page.
    Non Auto? What do you mean by that? Most all settings can be left in Auto if you are not overclocking then, if you set them to what you see on the left in the BIOS or Normal then this may add to your issues. Please use Auto for all settings you are not sure about or have not been advised about
    Check and understood volts on auto except for RAM at 1.8v
    Once we can find your ram info I can advise you some full settings that should give you no issues at stock.... If this ram is not faulty or incompatible
    Check and understood. As stated will test RAM ASAP. It should run at least at 800 MHz for stock settings as far as memory speed is concerned.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto CPU Clock Ratio ..........................:7x
    Fine CPU Clock Ratio.....................:.0 CPU Frequency ...........................:
    Clock Chip Control Standard Clock Control
    CPU Host Clock Control..................: [Disabled] CPU Host Frequency (Mhz) ............:333 Mhz
    PCI Express Frequency (Mhz) .........:100 C.I.A.2................................:[Disabled]
    Advanced Clock Control [Press Enter] CPU Clock Drive...........................:800 <<<
    PCI Express Clock Drive.................:800 <<< CPU Clock Skew (ps)....................:0 <<<
    MCH Clock Skew (ps)...................:0 <<<
    DRAM Performance Control
    Performance Enhance...................: STANDARD (G)MCH Frequency Latch...............: Auto
    System Memory Multiplier ..............:Auto Memory Frequency (Mhz) ..............:800MHz
    DRAM Timing Selectable ................:AUTO
    Standard Timing Control
    CAS Latency Time.......................auto tRCD .........................................auto
    tRP'.........................................auto. . tRAS.......................................... auto
    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go
    Advanced Timing Control
    tRRD...........................................3 auto tWTR..........................................3 auto
    tWR.........................................6auto tRFC.........................................52aut o
    tRTP.........................................3auto Command Rate (CMD) ....................:0 auto
    Driving Strength Profiles
    Driving Strength ............................ auto Channel A Static tRead Value.........................:auto
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto
    ps Dimm2 Clock Skew Control...............:Auto ps Channel B Static tRead Value.........................:auto
    MCH tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto
    ps Dimm2 Clock Skew Control...............:Auto ps
    Motherboard Voltage Control
    CPU CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please
    do find and set your own voltages CPU Termination…..... auto.......: << If overclocking Please set to stock,
    Auto overvolts this way to much. Optimal range for overclock would be 1.2-1.5 depending on Vcore, try
    to keep at least .1 under vcore. Auto is fine if not overclocking CPU PLL…………………....auto.......:
    << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock
    would be 1.5-1.65. Auto is fine if not overclocking CPU Referen.…………....auto*.......: <<< .64% Of Vtt (Termination above)
    Auto Will set this correctly CPU Reference2………,,auto*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly
    MCH/ICH MCH Core…………….....auto...........: << MCH Reference….…….auto...........; <<< Leave
    MCH/DRAM Ref.…......auto...........: <<< Leave ICH I/O……………….....auto............: <<< Leave
    ICH Core…………...……auto............: <<< Leave DRAM DRAM Voltage ……....auto...........:
    DRAM Termination .…auto............: <<< Leave Channel A Reference auto............: <<< Leave
    Channel B Reference auto............: <<< Leave
    Advanced Settings
    Limit CPUID Max. to 3.....................: Disabled No-Execute Memory Protect............: Enabled
    CPU Enhanced Halt (C1E)................: Enabled C2/C2E State Support....................: Enabled
    x C4/C4E State Support..................: Enabled CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled]
    Init first Display ..................:PEG
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    Just finished the second BIOS template whew these are really complicated man. I am going to add
    a few other settings that I have changed along the road.
    Integrated peripherals

    onboard SATA controller(?) .....AHCI mode SATA Port 0-3 native mode .........Enabled
    Onboard Serial Port1 .............Disabled Onboard Parallel Port .................Disabled
    Green LAN ........................Enabled
    Power mgmt Setup
    ACPI Suspend Type ...........S3(STR) USB Device Wakeup from S3 ..........Enabled
    PnP/PCI Configuration
    Resources controlled by .........Manual
    IRQ Resources Press enter
    All IRQ'a assigned to PCI devices except IRQ-10 and IRQ-14 which are reserved at this point

    thanks
    More later Max
    Last edited by MadMax2911; 09-02-2009 at 12:52 PM. Reason: more information
    BUILD #2 GA-EP45-DS3R [Rev1.0] BIOS Flashed F11e, CPU=INTEL Core2 Quad Q8200 Yorkfield-4M LGA 775 with Mugen2 cooler RAM= Mushkin 996599 link 2 x 2GB, Hard drive=WD 6400AAKS, DVD=HP dvd1160i OS=Win 7 SP1 64 bit Video=BFG 8800GTS OC edition CASE=Thermaltake Tsunami Dream P.S.=Antec TP3-650

    Build #3 GA-EP45-UD3LR__rev 1.0__ BIOS F11, CPU Core2 Duo E8400 3.157GHz WMugen2 Cooler, Power Supply: Antec EA-500D 500 W, RAM: Corsair 2 GB Hard Drive: WD 160 GB OS: Win XP SP3 Video: MSI GTS450 2GB




  9. #9
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: EP45-UD3LR BIOS help overclock error message

    Cpuz displays the default memory specs programmed by the manufacturer.
    The pdf file you provided states that this memory is spec'd at 2.1 volts.
    SuperTalent T800UA12C5 memory specs, shows the older compatible motherboards, but each module is 512MB.
    SuperTalent DDR2 memory specs, doesn't list your T800UA1GC5 memory.
    I'm still not sure which memory you have.

    You'll do much better if you sell this memory and use some real performance memory that runs at 4-4-4-12 timings at 800MHz. Unfortunately, several memory manufacturers market their low-end memory as high performance gaming memory and they include fancy looking heat-spreaders. I suggest checking out Crucial, Gskill, Mushkin, and Corsair memory offerings. You should be able to buy a 2x2GB memory kit for $45 - $60, with free shipping.

    I too am limited by the 7x cpu multiplier.
    My C2D system is stable running at 3.444GHz with FSB = 492MHz and 984MHz memory speeds using Mushkin (996599) XP2-8500 (2x2GB).
    Most quality, high performance 800MHz memory will run at these speeds or higher.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  10. #10
    MadMax2911's Avatar
    MadMax2911 is offline Member
    Join Date
    Dec 2008
    Location
    Southern CA
    Posts
    369

    Default Re: EP45-UD3LR BIOS help overclock error message

    Hi Prof Jim I have found out that while this memory has the heat spreaders and looks like overclocking memory the super talent rep that I talked to said that it is not overclocking memory.
    EDIT
    ********************Testing with Memtest***************
    Stick 1 passed 6 hours of testing with above settings (BIOS)9-3-09 zero errors
    Stick 2 passed 7 hours of testing with above settings 9-5-09 zero errors.
    Hooray No errors Memory seems OK.
    **********************************************

    I need to do my homework first, before my purchases so I can get a link or some hard info on the product.
    Thanks for your reply I am running late see ya.
    Last edited by MadMax2911; 09-06-2009 at 05:46 AM. Reason: add info
    BUILD #2 GA-EP45-DS3R [Rev1.0] BIOS Flashed F11e, CPU=INTEL Core2 Quad Q8200 Yorkfield-4M LGA 775 with Mugen2 cooler RAM= Mushkin 996599 link 2 x 2GB, Hard drive=WD 6400AAKS, DVD=HP dvd1160i OS=Win 7 SP1 64 bit Video=BFG 8800GTS OC edition CASE=Thermaltake Tsunami Dream P.S.=Antec TP3-650

    Build #3 GA-EP45-UD3LR__rev 1.0__ BIOS F11, CPU Core2 Duo E8400 3.157GHz WMugen2 Cooler, Power Supply: Antec EA-500D 500 W, RAM: Corsair 2 GB Hard Drive: WD 160 GB OS: Win XP SP3 Video: MSI GTS450 2GB




Page 1 of 10 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •