Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Please check this overclock for me.




  1. #1
    Join Date
    Aug 2009
    Posts
    94

    Default Please check this overclock for me.

    Advanced CPU Features:CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled
    Virtualization Technology[/URL] ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 16
    Isonchronous Frequency ..................[Enabled]
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................200
    PCI Express Frequency (MHz) ........... [100]
    C.I.A.2 [Disabled
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    Advanced DRAM Features
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ 8X
    DRAM Timing Selectable (SPD) .......... [Manual]
    Channel A + B + CChannel A Timing Settings:
    Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24
    Advanced Voltage Control:
    CPULoad Line Calibration ................. not sure
    vcore is 1.29375v
    QPI/VTT Voltage 1.150v ............1.300v
    CPU PLL 1.800v .......................1.840
    MCH/ICH[/B]PCIE 1.500v ...........................1.54v
    QPI PLL 1.100v .......................auto
    IOH Core 1.100v .....................1.14v
    ICH I/O 1.500v .......................1.500v
    ICH Core 1.1v ........................1.14v
    DRAM Voltage 1.500v ..............1.64
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO
    This works for me at 4ghz with the memory at 1600. I ran it fine for an hour on OCCT with core temps just touching the 80c mark on average on 100% load. The idle core temps are about 46c average. I would like to know if this overclock and temps are safe? And is there any tweaking I can do to lower the temps? Thank you

    GA-EX58-UD5 F7 BIOS
    INTEL I7 920
    EVGA GTX295 COOP
    OCZ GOLD OCZ3G1600LV6GK 6GB DDR3-1600 PC3-12800 CL8-8-8-24
    THERMALRIGHT ULTRA 120 EXTREME 1366RT
    CORSAIR HX1000 CMPSU POWER SUPPLY
    XFI EXTREME MUSIC SOUND CARD
    2 PIONEER DVD BURNERS
    1 SATA2 SEAGATE 500GB DRIVE
    1 SATA WESTERN DIGITAL 320GB DRIVE
    1 SATA MAXTOR 300GB DRIVE
    1 SATA MAXTOR 250 GB DRIVE
    COOLERMASTER ATCS840 CASE
    RUNNING VISTA 64 ULTIMATE
    all drivers from mother board disc are installed except the audio
    Last edited by shaned; 08-31-2009 at 04:18 PM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Please check this overclock for me.

    Well...... The most important setting per your question you left out of your settings.

    Vcore is missing, that would be key in lowering temps. And yes 80C is outside of the comfort zone and would likely be 90-100C If you ran Intel Burn Test, so please do not.

    Settings look ok though, you may just need less Vcore or a better cooler

  3. #3
    Join Date
    Aug 2009
    Posts
    94

    Default Re: Please check this overclock for me.

    sorry
    vcore is 1.29375

  4. #4
    Join Date
    Aug 2009
    Posts
    94

    Default Re: Please check this overclock for me.

    I am unable to wake from sleep mode with these settings. Any idea how to fix this?

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Please check this overclock for me.

    Well sounds like you need a better cooler then, I was expecting to hear 1.34-1.38+ for those temps. You sure it is fully and properly secure and that you did not use to much paste? Just wondering, you never mentioned the cooler so I am not sure what you have.

    For S3 issues you will have to update to the latest BIOS to be able to resume from S3

  6. #6
    Join Date
    Aug 2009
    Posts
    94

    Default Re: Please check this overclock for me.

    its a thermalright 120 extreme. Maybe I did use too much paste. I put a coat of ocz silver on both cpu and back of heatsink. I also lapped the heatsink.

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Please check this overclock for me.

    Ahh well temps should not be that high with a TRUE

    Are you using the penny or washer mod to it? Maybe you need to?

    Only a small bad of paste in the middle of the CPU is needed, sounds like you did maybe use too much?

  8. #8
    Join Date
    Aug 2009
    Posts
    94

    Default Re: Please check this overclock for me.

    what is the penny mod?

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  10. #10
    Join Date
    Aug 2009
    Posts
    8

    Default Re: Please check this overclock for me.

    I am using a TRUe with similar settings and without the penny mod and temps are nowhere near that high. Lapping the cooler may have been a mistake, I believe there is a reason for it's banana shape.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •