Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: EP45 DS3L Multimedia Device IRQ cannot be seen




  1. #1
    Join Date
    Sep 2009
    Location
    Hungary
    Posts
    9

    Exclamation EP45 DS3L Multimedia Device IRQ cannot be seen

    That problem of mine that the sound went away after 1 week i mean the bios is creaking allowing there is auto Azalia but IRQ division test which cannot be found clr cmos not good, element who not good, help me because I do not know it what may be the trouble !
    Here a picture I put a circle round it what there is not for me there and there is not a sound

    http://kepfeltoltes.org/kepekn/27758...b223468846.jpg


    EP45 DS3L F8 bios
    Pentium DC E5200 2,5ghz oc :2,8
    kingmax 2GB 800mhz oc: 900
    Gigabyte 9600GT
    LC Power 420watt
    Last edited by NagySany; 09-06-2009 at 04:28 PM.

  2. #2
    Join Date
    Sep 2009
    Location
    Hungary
    Posts
    9

    Default Re: EP45 DS3L Multimedia Device IRQ cannot be seen

    Somebody could answer that mt ell at this time állitani this forum is because of that theoretically
    Last edited by NagySany; 09-06-2009 at 07:49 PM.

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45 DS3L Multimedia Device IRQ cannot be seen

    You need to set your own IRQ? Sorry, not sure what you are asking

    If you need to set your own IRQ's then you can press "Control + F1" on the MAIN Page of the BIOS, then the screen will flash, then go into the PnP/PCI BIOS page and you will see the available Options

  4. #4
    Join Date
    Sep 2009
    Location
    Hungary
    Posts
    9

    Default Re: EP45 DS3L Multimedia Device IRQ cannot be seen

    Oh thanks man!!!! back up the pc comes from the service who i got it test Ctrl+f1!! there it was said that the motherboard onto good tomorrow ointments put it together then how doe it work or not

    1-2 picture where you could upload to press and what I see as a /translate.google.com program read and not very well turn
    Last edited by NagySany; 09-07-2009 at 10:50 PM.

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45 DS3L Multimedia Device IRQ cannot be seen

    Sorry I do not understand what you say.

    Can you please send message to this member, so he can translate for us? He is from Hungary and I can understand what he says so maybe he speaks English good, or knows a better translator than you are using?
    http://forums.tweaktown.com/private....=newpm&u=44804

    I will PM him as well

  6. #6

    Default Re: EP45 DS3L Multimedia Device IRQ cannot be seen

    So,

    His new computer worked during first week, but then IDE controller started to work bad.
    In the service they are said the problem is with the PSU.
    After PSU change IDE problems gone, but there is no sound.
    Even the irq not listed now.
    The picture is showing that irq (when it was ok) even that irq not listed now.
    On driver install there is no error message, there is no change after restart.



    ----------------------------------

    The first obvious question is that sound chip is enabled in the bios ?
    Or simple irq sharing problem ?


    Regards,
    Pubem
    Intel Core7 920. D0 stepping
    Mobo: Gigabyte GA-X58-extreme/X58A-UD7
    Chieftec Server case
    PSU: Corsair VX550 W
    Scythe Kabuto cpu cooler
    Scythe s-flex ventillation
    RAM: 12GB ocz platinum 1866 9-9-9-27 (running at below 1700 and 8-8-8)
    GPU:Zotac GTX275 AMP! edition
    HDD:4x1tb samsung spinpoint f1
    Mon: 2x Samsung syncmaster 214t PVA 4:3.
    Os: 32bit xp 64bit w7

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45 DS3L Multimedia Device IRQ cannot be seen

    Yes, it should not be a IRQ issue, looks to me like if he is not seeing the IRQ he thinks should be sounds as you say the Azalia setting may be disabled.

    Please check this setting in the Integrated Peripherals BIOS Page

    Integrated Peripherals

    Azalia Codec........................ Set to Enabled

    Thanks for helping translate Pubem, hope we can get this fixed for him

  8. #8

    Default Re: EP45 DS3L Multimedia Device IRQ cannot be seen

    translated.


    You are welcome.
    Intel Core7 920. D0 stepping
    Mobo: Gigabyte GA-X58-extreme/X58A-UD7
    Chieftec Server case
    PSU: Corsair VX550 W
    Scythe Kabuto cpu cooler
    Scythe s-flex ventillation
    RAM: 12GB ocz platinum 1866 9-9-9-27 (running at below 1700 and 8-8-8)
    GPU:Zotac GTX275 AMP! edition
    HDD:4x1tb samsung spinpoint f1
    Mon: 2x Samsung syncmaster 214t PVA 4:3.
    Os: 32bit xp 64bit w7

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  10. #10
    Join Date
    Sep 2009
    Location
    Hungary
    Posts
    9

    Default Re: EP45 DS3L Multimedia Device IRQ cannot be seen

    Azalia Codec........................auto !!
    not IRQ multimedia Device no sound

    only option is disabled and auto

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •