Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: 4x1 gb ram problem




  1. #1
    Join Date
    Aug 2009
    Posts
    3

    Default 4x1 gb ram problem

    I have got 4x1gb kingston hyperx ram.
    I didn't open this thread to kingston section because i've tested rams one by one with orthos and memtest86.

    My motherboard is EP35C-DS3R

    Problem occurs only when i use all rams(4x1gb).
    When i use two slots(2x1gb) or one slot(1gb) no problem.
    But using 4 slots gives error in orthos.

    Error message is like this:
    "FATAL ERROR: Rounding was 0.494422011, expected less than 0.4."
    It gives this error just in ten seconds.

    What can i do except of rma? I've already rma'd this board..

    Note:System isn't overclocked.
    Last edited by ther; 09-11-2009 at 06:26 PM.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: 4x1 gb ram problem

    Please give me your full specs and BIOS settings, link in my signature for a template. 4x1GB needs some BIOS adjustments to run stable, that is all you likely need to do since you have tested the ram and they run fine by themselves.

    I can advise once you fill out a template and give your specs, please do link the ram or give model # as well

    Thanks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •