Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 42

Thread: New bild GA-EX58-UD3R RAM SETTINGS




  1. #1
    Join Date
    Sep 2008
    Posts
    52

    Default New bild GA-EX58-UD3R RAM SETTINGS

    Hi!
    I have a problem with ram settings in bios i think!.
    The system only runs in defult mode,but when i turn upp the profile1 mode upp to 1600mhz
    the conputer starts but son justs frezzes,can anyone help plz..
    RAM IS TR3X3G1600C8D
    CPU:INTEL I7 2,66MHZ
    grafic GTS 260
    poWer Corsair 550w
    Wd raptor 74gb

    Plz help anyone

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  3. #3
    Join Date
    Sep 2008
    Posts
    52

    Default Re: New bild GA-EX58-UD3R RAM SETTINGS

    Bios are FB !

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: New bild GA-EX58-UD3R RAM SETTINGS

    So you have revision 1.6 board? If so...

    Please first update your BIOS to F4D
    http://www.fileden.com/files/2008/7/...58UD3R.F4D.zip

    Please read this guide and use Qflash to update NOT @BIOS >>
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

    Then after you have loaded optimized ect, and are done with your flash try things again and if you do not have any luck please see the link in my signature and get a BIOS Template then give us your settings.

    I advise against XMP use so you know, you need to set things manually and find your own stable QPI/Vtt voltage along with many other things.

  5. #5
    Join Date
    Sep 2008
    Posts
    52

    Default Re: New bild GA-EX58-UD3R RAM SETTINGS

    I updated to latest beta same thing happend...
    Cant you tell the settings ? or most i download the tenplate!.

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: New bild GA-EX58-UD3R RAM SETTINGS

    Here is settings for stock per your hardware >>

    Load optimized defaults first

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage

    CPU = Model #
    Motherboard = Model, Revision #
    BIOS Version =
    Ram = Brand, Model#, Part#, And or Link

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency ..........................  24-26 (Always 2x memory Multi or 2x +1, 2x +2, ect) 
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 133
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO] << Set 12 (12 x 133 = 1600Mhz Ram speed)
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24
    
    Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
    
    
    ##Channel A Advanced Timing Control##
    tRC ........................................  (Should be = tRAS + tRP or above for stability)
    tRRD .......................................
    tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................ 5-12 (Odd # values likely will fail)
    tWTP .......................................    (tWTP Must = tWR + tWL + 4)
    tWL ........................................   (tWL Must be CAS Latency -1)
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................
    
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... Auto
    QPI/VTT Voltage 1.150v ............ Auto or set 1.2-1.38
    CPU PLL 1.800v ....................... Auto
    
    MCH/ICH
    PCIE 1.500v ........................... Auto
    QPI PLL 1.100v ....................... 1.2-1.24
    IOH Core 1.100v ..................... 1.2-1.24
    ICH I/O 1.500v ....................... Auto
    ICH Core 1.1v ........................ Auto
    
    DRAM
    DRAM Voltage 1.500v .............. 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  7. #7
    Join Date
    Sep 2008
    Posts
    52

    Default Re: New bild GA-EX58-UD3R RAM SETTINGS

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. 4.8GHz
    Uncore Frequency .......................... 2667MHz (Always 2x memory Multi or 2x +1)
    Isonchronous Frequency ..................[Didnt find]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) ..................... 133
    PCI Express Frequency (MHz) ........... [Auto]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [AUTO]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 8 Auto
    tRCD ....................................... 8 Auto
    tRP ......................................... 8 Auto
    tRAS ....................................... 20 Auto

    Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread

    ##Channel A Advanced Timing Control##
    tRC ........................................ 27 Auto (Should be = tRAS + tRP or above for stability)
    tRRD ....................................... 4 Auto
    tWTR ...................................... 4 Auto (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................ 8 Auto
    tWTP ....................................... 19 Auto (tWTP Must = tWR + tWL + 4)
    tWL ........................................ 7 Auto (tWL Must be CAS Latency -1)
    tRFC ....................................... 60 Auto
    tRTP ....................................... 4 Auto
    tFAW ...................................... 20 Auto
    Command Rate (CMD) ................ 1 Auto

    ##Channel A Misc Timing Control##
    Round Trip Latency ................... 51 Auto



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... Auto
    QPI/VTT Voltage 1.150v ............ Auto
    CPU PLL 1.800v ....................... Auto

    MCH/ICH
    PCIE 1.500v ........................... Auto
    QPI PLL 1.100v ....................... Auto
    IOH Core 1.100v ..................... Auto
    ICH I/O 1.500v ....................... Auto
    ICH Core 1.100v ........................ Auto

    DRAM
    DRAM Voltage 1.500v .............. Auto
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  8. #8
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: New bild GA-EX58-UD3R RAM SETTINGS

    for stock just keep everything on auto exept ram voltage set it to 1.66 in the bios and set ram multi to give u or as close to 1600mhz dont go above rated speed tho or it'll cause crashes keep timings on auto
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: New bild GA-EX58-UD3R RAM SETTINGS

    I gave you stock settings above to use, did you miss understand that I intended for you to try those out?

    Please do try the settings I posted above, sorry I should have removed the "This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours" comment, I did mean for you to use those not to give me your settings.

  10. #10
    Join Date
    Sep 2008
    Posts
    52

    Default Re: New bild GA-EX58-UD3R RAM SETTINGS

    Quote Originally Posted by Lsdmeasap View Post
    I gave you stock settings above to use, did you miss understand that I intended for you to try those out?

    Please do try the settings I posted above, sorry I should have removed the "This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours" comment, I did mean for you to use those not to give me your settings.

    ookay so i shall test those settings that you posted the first time:S?

Page 1 of 5 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •