Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 9 of 10 FirstFirst ... 78910 LastLast
Results 81 to 90 of 93

Thread: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!




  1. #81
    Join Date
    Sep 2009
    Posts
    63

    Default Re: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!

    Ok another update. I don't how to treat this Prem95 cause now it failed after 14 minutes while the previous test it lasted more then 2 hours and I stopped it manually.
    CPU: Intel E8500 @ 3.16GHz
    RAM: OCZ Titanium 2x2GB & G.Skill 2x2GB @ 800MHz
    MB: Gigabyte EX38-DS4 (BIOS F3)
    GPU: ATI Palit 4870 1GB Dual Edition
    PSU: ThermalTake 750W
    Cooling: Ximgatek Achilles 1284S
    Case: CoolerMaster 690

  2. #82
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!

    The 1024 FFT? This happens, doesn't always fail after the same time. Can you post your current settings so others can comment on them?

  3. #83
    Join Date
    Sep 2009
    Posts
    63

    Default Re: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8]
    Fine Clock Ratio ____________[0]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [432]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.66D]
    DRAM Timing Selectable_______ SPD __ [Manual]

    Performance Enhance = [Standard]

    CAS Latency Time_________5_______
    Dram RAS# to CAS# Delay_____5____
    Dram RAS# Precharge Delay__5_____
    Precharge Delay (tRAS)_____18_____

    ACT to ACT Delay (tRRD)_____3____ [5 by memset]
    Rank Write to READ Delay____3____ [13 by memset]
    Write to Precharge Delay____6_____[17 by memset]
    Refresh to ACT Delay________58______
    Read to Precharge Delay_____3_____
    Static tRead Value__________7_____
    Static tRead Phase Adjust___5_____

    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V]
    PCI-E OverVoltage Control_ [normal]
    FSB OverVoltage Control___ [+0.1v]
    (G)MCH OverVoltage Control [+0.1v]
    CPU LOAD LINE [Auto]
    CPU Voltage Control_______ [1.2375]

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect: Disabled
    CPU: Intel E8500 @ 3.16GHz
    RAM: OCZ Titanium 2x2GB & G.Skill 2x2GB @ 800MHz
    MB: Gigabyte EX38-DS4 (BIOS F3)
    GPU: ATI Palit 4870 1GB Dual Edition
    PSU: ThermalTake 750W
    Cooling: Ximgatek Achilles 1284S
    Case: CoolerMaster 690

  4. #84
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!

    +0.1v MCH and FSB OverVoltage?

  5. #85
    Join Date
    Sep 2009
    Posts
    63

    Default Re: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!

    yes
    CPU: Intel E8500 @ 3.16GHz
    RAM: OCZ Titanium 2x2GB & G.Skill 2x2GB @ 800MHz
    MB: Gigabyte EX38-DS4 (BIOS F3)
    GPU: ATI Palit 4870 1GB Dual Edition
    PSU: ThermalTake 750W
    Cooling: Ximgatek Achilles 1284S
    Case: CoolerMaster 690

  6. #86
    Join Date
    Sep 2009
    Posts
    63

    Default Re: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!

    FSB voltage: 1.15v
    MCH voltage: 0.1v
    8 hours of blend testing with Prim95 and no errors. But it was only when I restarted the computer and right after I ran the test. If I'll run it when the computer is up for some time it most likely to fail. I can't seem to find any logical explanation as to why it failed after 14 minutes prior to that without changing the voltage. Simply a fresh restart.
    Does this mean the system is stable?

    CPU: Intel E8500 @ 3.16GHz
    RAM: OCZ Titanium 2x2GB & G.Skill 2x2GB @ 800MHz
    MB: Gigabyte EX38-DS4 (BIOS F3)
    GPU: ATI Palit 4870 1GB Dual Edition
    PSU: ThermalTake 750W
    Cooling: Ximgatek Achilles 1284S
    Case: CoolerMaster 690

  7. #87
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!

    Quote Originally Posted by Gil80 View Post
    Does this mean the system is stable?
    This is a good question.
    Prime95 can run for hours and fail quickly in different situations. For example, when I OCed my system I found that running it at windows startup, right when the desktop shows up, when the system is still loading services, it would fail after few seconds, when otherwise work for hours.
    It is probable to fail faster if there other significant load on the CPU.

    BTW do you have a screen saver and/or power saving options enabled? Prime95 is running at the lowest priority and screen saver may steal some CPU time.

  8. #88
    Join Date
    Sep 2009
    Posts
    63

    Default Re: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!

    I intentionally disabled the screen saver for Prime95, but I set the monitor to standby mode after 20 minutes.
    CPU: Intel E8500 @ 3.16GHz
    RAM: OCZ Titanium 2x2GB & G.Skill 2x2GB @ 800MHz
    MB: Gigabyte EX38-DS4 (BIOS F3)
    GPU: ATI Palit 4870 1GB Dual Edition
    PSU: ThermalTake 750W
    Cooling: Ximgatek Achilles 1284S
    Case: CoolerMaster 690

  9. #89
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!

    So you all set now then? 8 hours is a good long run in prime95, but failures can occur at 12-24+ Hours so you never really know. I can say though 8 hours is likely pretty close to 100% stability and if you do not want to run longer tests you may be ok, but I do advise longer testing though if you want to be sure

  10. #90
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EX38-DS4 - OCZ Titanium 1150MHz - Can't set it right!

    One test failed withing minutes and then it passed 8 hours.
    Question: what are safe values for MCH and FSB overvoltage? According to the manual FSB has 0.05v increments, and MCH 0.025v increments.

Page 9 of 10 FirstFirst ... 78910 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •