Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Ga-ma770t-ud3p




  1. #1
    Join Date
    Sep 2009
    Location
    Australia
    Posts
    166

    Default Ga-ma770t-ud3p

    Hello All,
    two problems I face with this board (new build F3 bios) in Vista32:

    1) SMART is enabled in bios but still no HDD(WD5000AADS) temperatures reported in Vista. WinDLG tells no SMART status available?

    2) Power on by (usb) keyboard or mouse does not work

    do I have to wait for a new bios?

  2. #2
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Ga-ma770t-ud3p

    Motherboard manual---->http://china.giga-byte.com/FileList/...70t-ud3p_e.pdf
    no HDD(WD5000AADS) temperatures reported
    Try HWmonitor ---->http://www.cpuid.com/download/hwmoni...onitor_114.zip
    Could you list your system specifications please.
    Power on by (usb) keyboard or mouse does not work
    It works on a PS2 Keyboard and mouse.
    Page 51 of your motherboard manual---->
    PME Event Wake Up
    Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a PCI or
    PCIe device. Note: To use this function, you need an ATX power supply providing at least 1A on
    the +5VSB lead. (Default: Enabled)
    HPET Support (Note)
    Enables or disables High Precision Event Timer (HPET) for Windows® Vista® operating system.
    (Default: Enabled)
    Power On By Mouse
    Allows the system to be turned on by a PS/2 mouse wake-up event.
    Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
    Disabled Disables this function. (Default)
    Double Click Double click on left button on the PS/2 mouse to turn on the system.
    Power On By Keyboard
    Allows the system to be turned on by a PS/2 keyboard wake-up event.
    Note: you need an ATX power supply providing at least 1A on the +5VSB lead.
    Disabled Disables this function. (Default)
    Password Set a password with 1~5 characters to turn on the system.
    Any KEY Press any key on the keyboard to turn on the system.
    Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.
    KB Power ON Password
    Set the password when Power On by Keyboard is set to Password. Press <Enter> on this item
    and set a password with up to 5 characters and then press <Enter> to accept. To turn on the
    system, enter the password and press <Enter>.
    Note: To cancel the password, press <Enter> on this item. When prompted for the password, press
    <Enter> again without entering the password to clear the password settings.
    AC Back Function
    Determines the state of the system after the return of power from an AC power loss.
    Soft-Off The system stays off upon the return of the AC power. (Default)
    Full-On The system is turned on upon the return of the AC power.
    Memory The system returns to its last known awake state upon the return of the AC
    power.
    Power-On by Alarm
    Determines whether to power on the system at a desired time. (Default: Disabled)
    If enabled, set the date and time as following:
    Date (of Month): Turn on the system at a specific time on each day or on a specific day in a
    month.
    Resume Time (hh: mm: ss): Set the time at which the system will be powered on automatically.
    Note: When using this function, avoid inadequate shutdown from the operating system or removal
    of the AC power, or the settings may not be effective.
    (Note) Supported on Windows® Vista® operating system only.
    Last edited by artdrivers; 09-21-2009 at 08:05 PM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  3. #3
    Join Date
    Sep 2009
    Location
    Australia
    Posts
    166

    Default Re: Ga-ma770t-ud3p

    Quote Originally Posted by artdrivers View Post
    Motherboard manual---->http://china.giga-byte.com/FileList/...70t-ud3p_e.pdf

    Try HWmonitor ---->http://www.cpuid.com/download/hwmoni...onitor_114.zip
    Could you list your system specifications please.

    It works on a PS2 Keyboard and mouse.
    ...<enter><enter><enter><enter><enter>
    Tried HWmonitor and it fails as well coz there is no SMART status available even it is activated in the sysbios and, no, I do not run RAID - only AHCI!


    </enter></enter></enter></enter></enter>

  4. #4
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Ga-ma770t-ud3p

    Good answer. Check your Hard drive which is where the sensor is. Mine shows a temperature in HWMonitor on my SATA in ide mode, and also showed on my SATA WD drives before I decided to RAID. That was with SMART enabled or disabled.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  5. #5
    Join Date
    Sep 2009
    Location
    Australia
    Posts
    166

    Default Re: Ga-ma770t-ud3p

    Mate, my HDDs are WD5000AADS and they do report temperatures IF it works. IDE mode is not useful as it is slow and not even NCQ support.

    On my old 939-socket Gigabyte AMD-mobo temperatures worked just fine in AHCI but now on a AM3 mobo and all fails?

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  7. #7
    Join Date
    Sep 2009
    Location
    Australia
    Posts
    166

    Default Re: Ga-ma770t-ud3p

    Quote Originally Posted by Lsdmeasap View Post
    Have you tried Everest for SMART info?
    tried that but no joy - not listing any SMART info!

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ga-ma770t-ud3p

    Some boards/BIOS will just simply not report anything unless IDE mode is used.

    Is there something specific you need to check, or was you wanting to monitor things in general?

  9. #9
    Join Date
    Sep 2009
    Location
    Australia
    Posts
    166

    Default Re: Ga-ma770t-ud3p

    I am generally used to monitoring the health status of my box. Everything worked on a 939-socket board. Why not with AM3?

    Can you tell me why it's just a fuss with AM3 boards?

  10. #10
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Ga-ma770t-ud3p

    IDE mode is not useful as it is slow and not even NCQ support.
    I decided to activate SATAI AHCI mode on a third HDD, and measure speed compaired to the SATAI IDE mode, Here is my results. I also compaired it to my SATAII RAID mode
    SATAI AHCI mode

    By artdrivers at 2009-09-23
    SATAI IDE mode

    By artdrivers at 2009-09-23
    SATAII RAID mode

    By artdrivers at 2009-09-23
    The RAID benchmark is unfair it is SATAII the other 2 are the same drive SATAI
    In SATAI IDE mode I have temperature readings on the SATA IDE mode drive with SMART disabled. In SATA AHCI mode and SATAI RAID mode no temps. I have decided to switch back to SATAI IDE mode on the single HDD
    Last edited by artdrivers; 09-24-2009 at 07:31 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •