Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Problems booting from DVD with RAID 0




  1. #1
    Join Date
    Sep 2009
    Posts
    2

    Default Problems booting from DVD with RAID 0

    Hi, just put together a system with a MA770-UD3, 2 500gb SATA drives and SATA DVD burner. I've set up the drives as RAID 0 and I can't boot from DVD, so can't install o/s.

    If I try without RAID it boots from DVD no problem. I tried swapping the sata connections around to see if that helped but no difference.

    Any suggestions?

  2. #2
    Join Date
    Sep 2009
    Posts
    2

    Default Re: Problems booting from DVD with RAID 0

    ok bit of an update. I have X2 550 on which I had unlocked the 2 extra cores. I just turned that off and it's booting fine now. I set it back again and now it is booting. If I try it with a USB stick which has sata drivers on then it doesn't boot.

    I have a corsair 650W psu so I'd have thought there would be enough power, do I have to turn something up a bit because of the core unlock?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •