Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: GA-EP45-UD3P E7400 @ 3.8.. Voltages and Temp OK??




  1. #1
    Join Date
    Sep 2009
    Posts
    27

    Default GA-EP45-UD3P E7400 @ 3.8.. Voltages and Temp OK??

    GIGABYTE GA-EP45-UD3P Rev 1.6
    Intel Core 2 Duo E7400 Wolfdale 2.8GHz
    G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 2.0-2.1V
    ARCTIC COOLING Freezer 7 Pro 92mm

    Been running small ftt on prime for about 16 hours.

    How are these voltages and temps for the e7400 @3.8

    Temps after 12 hours for Core 0 and Core 1 were between 58-62 with Temp1 at 35 and Temp2 between 59-65.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9
    Fine CPU Clock Ratio.....................: +0.5
    CPU Frequency ...........................: 3.8Ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 400
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.66c
    Memory Frequency (Mhz) ..............: 1066Mhz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15

    Channel A & B
    Static tRead Value.........................: 8

    Motherboard Voltage Control
    Voltage Type.………... Manual
    Load Line Calibration : ON

    CPU Vcore….……….........................:1.43750
    CPU Termination…..... 1.200V*.......: 1.30
    CPU PLL…………………....1.500V*.......: 1.59V

    CPU Referen.…………....0.755V*.......: 0.76
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.20V
    MCH Reference….…….0.800V...........; 0.76
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.550V............: 1.50V
    ICH Core…………...……1.100V............: 1.10V
    DRAM
    DRAM Voltage ……....1.800V............: 2.00V
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45-UD3P E7400 @ 3.8.. Voltages and Temp OK??

    What have the temps been taken with, SpeedFan? Temp2 looks like CPU temp but it must be less than core temp.

  3. #3
    Join Date
    Sep 2009
    Posts
    27

    Default Re: GA-EP45-UD3P E7400 @ 3.8.. Voltages and Temp OK??

    temps were taken with speedfan.

  4. #4
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45-UD3P E7400 @ 3.8.. Voltages and Temp OK??

    The temps are not bad, but see what you get with HWMonitor(CPUID), it also has min max temps which is useful, and you can reset min/max temps before tests.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •