Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 7 of 12 FirstFirst ... 56789 ... LastLast
Results 61 to 70 of 118

Thread: OCing a Q9550 on a GA-EP45-DS3R




  1. #61
    Join Date
    Sep 2009
    Location
    ohio, usa
    Posts
    94

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    ok got it booted up at 3.83ghz vcore at 1.325v i think i have that set good. not sure about the mem yet.

    got the volts on it at required 2.1v
    mch is 1.18v
    laten=5-7-7-18

    only passed 3 out of 5 in ibt at full mem.
    passed all 5 out of 5 at half mem and 1/4 mem. but only 3 out of 5 at full mem... any ideas???
    GA-EP45-UD3P 1.6rev
    Q9550 @ 451x8.5 3.83ghz SLB8V 1.296 vcore in bios
    Batch #L846B715
    G-Skill ddr2 1066 2x1gb running at 1082mhz??
    OCZ Vendetta 2 with 120mm fan
    Corsair HX650w PSU with a 120mm fan
    Nvidia GeForce 8800 GTS
    WD2500AAKS
    WD3200AAKS
    WD500GB GP
    WD1001FALS
    All housed in the Big Red Hemi
    CM HAF 922 1X200MM,2X200MM RED LED & 1x140mm rear fan
    Burners=
    Sony Optaric Nec AD7220S
    Sony Optaric Nec AD7240S
    Lite-on IHAS324-9-A x2

  2. #62
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Details, Details what memory, Corsair?
    Try setting your timings to 5 5 5 15 MCH Core to 1.2

    Post template of current settings and what your wanting to accomplish.

  3. #63
    Join Date
    Sep 2009
    Location
    ohio, usa
    Posts
    94

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    oh sorry..lol

    gskill ddr2 1066
    Newegg.com - G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL5D-2GBPK - Desktop Memory

    ok i actually set the mem to 5-6-6-18 passed all 5 out of 5 in IBT.
    began running prime95. all was well for about 15 mins or so then worker#3 failed but is it the core or the mem??? here is a screen shot.


    wonder if takeing up mch 1 mor spot would get me over the hump?

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...................: Fast
    CPU Clock Ratio ...........................: 8
    Fine CPU Clock Ratio.......................: 0.5
    CPU Frequency .............................: 3834 MHz (451*8.5)
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control.....................: [Enabled] 
    CPU Host Frequency (Mhz) ..................: 451 MHz
    PCI Express Frequency (Mhz) ...............: 100
    C.I.A.2 ...................................: [Disabled]
    Advanced Clock Control [Press Enter]
    CPU Clock Drive............................: <<< 800
    PCI Express Clock Drive....................: <<< 900
    CPU Clock Skew (ps)........................: <<< 0ps
    MCH Clock Skew (ps)........................: <<< 0ps
    DRAM Performance Control
    Performance Enhance........................: [STANDARD]
    Extreme Memory Profile (X.M.P.)............: [Disabled]
    (G)MCH Frequency Latch.....................: [Auto]
    System Memory Multiplier ..................: [2.00D]
    Memory Frequency (Mhz) ....................: 902
    DRAM Timing Selectable ....................: [Manual]
    Standard Timing Control
    CAS Latency Time...........................: 5
    tRCD ......................................: 6
    tRP'.......................................: 6
    tRAS.......................................: 18
    Advanced Timing Control
    tRRD.......................................: 
    tWTR.......................................: 
    tWR........................................:     nopt sure on these didnt look when i was in there
    tRFC.......................................: 
    tRTP.......................................: 
    Command Rate (CMD) ........................: 
    Driving Strength Profiles
    Driving Strength ..........................: 1066
    Channel A
    Static tRead Value.........................: 11
    tRD Phase0 Adjustment......................: Auto
    tRD Phase1 Adjustment......................: Auto
    tRD Phase2 Adjustment .....................: Auto
    tRD Phase3 Adjustment......................: Auto
    Trd2rd(Different Rank).....................: Auto 
    Twr2wr(Different Rank).....................: Auto 
    Twr2rd(Different Rank).....................: Auto 
    Trd2wr(Same/Diff Rank).....................: Auto 
    Dimm1 Clock Skew Control...................: Auto  ps
    Dimm2 Clock Skew Control...................: Auto  ps
    Channel B
    Static tRead Value.........................: 11
    tRD Phase0 Adjustment......................: Auto 
    tRD Phase1 Adjustment......................: Auto
    tRD Phase2 Adjustment .....................: Auto
    tRD Phase3 Adjustment......................: Auto
    Trd2rd(Different Rank).....................: Auto 
    Twr2wr(Different Rank).....................: Auto 
    Twr2rd(Different Rank).....................: Auto 
    Trd2wr(Same/Diff Rank).....................: Auto 
    Dimm1 Clock Skew Control...................: Auto  ps
    Dimm2 Clock Skew Control...................: Auto  ps
    Motherboard Voltage Control
    CPU
    Load-Line Calibration......................: [Enabled] i dont have this option.
    CPU Vcore............1.25000V..............: 1.325V
    CPU Termination......1.200V*...............: 1.200V
    CPU PLL..............1.500V*...............: 1.500V
    CPU Referen..........0.760V*...............: Auto
    MCH/ICH
    MCH Core.............1.100V................: 1.200V  
    MCH Reference........0.760V................: Auto
    MCH/DRAM Ref.........0.900V................: Auto
    ICH I/O..............1.500V................: 1.500V
    ICH Core.............1.100V................: 1.100v
    DRAM
    DRAM Voltage ........2.000V................: 2.100V
    DRAM Termination.....0.900V................: Auto
    Channel A Reference..0.900V................: Auto
    Channel B Reference..0.900V................: Auto
    Advanced Settings
    Limit CPUID Max. to 3......................: [Disabled]
    No-Execute Memory Protect..................: [Enabled]
    CPU Enhanced Halt (C1E)....................: [Disabled]
    C2/C2E State Support.......................: [Disabled]
    x C4/C4E State Support.....................: [Disabled]
    CPU Thermal Monitor 2(TM2) ................: [Enabled]
    CPU EIST Function..........................: [Enabled]
    Virtualization Technology..................: [Enabled] 
    Integrated Peripherals
    Legacy USB Storage Detect .................: [Enabled]
    there is alot of empty spots in that template. next time i shut it down adn tweak something i will get more indetail.
    Last edited by cincyrob; 10-11-2009 at 04:46 AM.
    GA-EP45-UD3P 1.6rev
    Q9550 @ 451x8.5 3.83ghz SLB8V 1.296 vcore in bios
    Batch #L846B715
    G-Skill ddr2 1066 2x1gb running at 1082mhz??
    OCZ Vendetta 2 with 120mm fan
    Corsair HX650w PSU with a 120mm fan
    Nvidia GeForce 8800 GTS
    WD2500AAKS
    WD3200AAKS
    WD500GB GP
    WD1001FALS
    All housed in the Big Red Hemi
    CM HAF 922 1X200MM,2X200MM RED LED & 1x140mm rear fan
    Burners=
    Sony Optaric Nec AD7220S
    Sony Optaric Nec AD7240S
    Lite-on IHAS324-9-A x2

  4. #64
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Ok well Gskils..lol

    Lets take the up to the 1066 (slightly OCed) rating Rob What do you say.

    Try these...
    Code:
    (G)MCH Frequency Latch.....................: [Auto]
    System Memory Multiplier ..................: [2.00D] <--2.40B
    Memory Frequency (Mhz) ....................: 1082
    DRAM Timing Selectable ....................: [Manual]
    Standard Timing Control
    
    CAS Latency Time...........................: 5
    tRCD ......................................: 5
    tRP'.......................................: 5
    tRAS.......................................: 15
     
    Advanced Timing Control
    tRRD.......................................: 4
    tWTR.......................................: 4
    tWR........................................: 6  
    tRFC.......................................: 58
    tRTP.......................................: 4
    Command Rate (CMD) ........................: 2
    
    Driving Strength Profiles
    Driving Strength ..........................: 1066
    
    Channel A
    Static tRead Value.........................: 10
    tRD Phase0 Adjustment......................: Auto
    tRD Phase1 Adjustment......................: Auto
    tRD Phase2 Adjustment .....................: Auto
    tRD Phase3 Adjustment......................: Auto
    Trd2rd(Different Rank).....................: Auto 
    Twr2wr(Different Rank).....................: Auto 
    Twr2rd(Different Rank).....................: Auto 
    Trd2wr(Same/Diff Rank).....................: Auto 
    Dimm1 Clock Skew Control...................: Auto  ps
    Dimm2 Clock Skew Control...................: Auto  ps
    
    Channel B
    Static tRead Value.........................: 10
    tRD Phase0 Adjustment......................: Auto 
    tRD Phase1 Adjustment......................: Auto
    tRD Phase2 Adjustment .....................: Auto
    tRD Phase3 Adjustment......................: Auto
    Trd2rd(Different Rank).....................: Auto 
    Twr2wr(Different Rank).....................: Auto 
    Twr2rd(Different Rank).....................: Auto 
    Trd2wr(Same/Diff Rank).....................: Auto 
    Dimm1 Clock Skew Control...................: Auto  ps
    Dimm2 Clock Skew Control...................: Auto  ps
    
    Motherboard Voltage Control
    CPU
    Load-Line Calibration......................: [Enabled] i dont have this option.
    CPU Vcore............1.25000V..............: 1.325V
    CPU Termination......1.200V*...............: 1.200V
    CPU PLL..............1.500V*...............: 1.500V
    CPU Referen..........0.760V*...............: Auto <--manually set to .760
    
    MCH/ICH
    MCH Core.............1.100V................: 1.200V  <+ 1 notch 1.220
    MCH Reference........0.760V................: Auto <--manually set to .760
    MCH/DRAM Ref.........0.900V................: Auto <-- manually set to 1.05
    ICH I/O..............1.500V................: 1.500V
    ICH Core.............1.100V................: 1.100v
    
    DRAM
    DRAM Voltage ........2.000V................: 2.100V
    DRAM Termination.....0.900V................: Auto  <--manually set to 1.05
    Channel A Reference..0.900V................: Auto
    Channel B Reference..0.900V................: Auto
    Good Luck
    Last edited by Conners; 10-11-2009 at 05:08 AM.

  5. #65
    Join Date
    Sep 2009
    Location
    ohio, usa
    Posts
    94

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...................: Fast
    CPU Clock Ratio ...........................: 8
    Fine CPU Clock Ratio.......................: 0.5
    CPU Frequency .............................: 3.83ghz (451*8.5)
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control.....................: [Enabled] 
    CPU Host Frequency (Mhz) ..................: 451 MHz
    PCI Express Frequency (Mhz) ...............: 100
    C.I.A.2 ...................................: [Disabled]
    Advanced Clock Control [Press Enter]
    CPU Clock Drive............................: <<< 800
    PCI Express Clock Drive....................: <<< 900
    CPU Clock Skew (ps)........................: <<< 0ps
    MCH Clock Skew (ps)........................: <<< 0ps
    DRAM Performance Control
    Performance Enhance........................: [STANDARD]
    Extreme Memory Profile (X.M.P.)............: [Disabled]
    (G)MCH Frequency Latch.....................: [Auto]
    System Memory Multiplier ..................: [2.00B]
    Memory Frequency (Mhz) ....................: 902
    DRAM Timing Selectable ....................: [Manual]
    Standard Timing Control
    CAS Latency Time...........................: 5
    tRCD ......................................: 6
    tRP'.......................................: 6
    tRAS.......................................: 18
    Advanced Timing Control
    tRRD.......................................: 4
    tWTR.......................................: 4
    tWR........................................: 8    
    tRFC.......................................: 56
    tRTP.......................................: 4
    Command Rate (CMD) ........................: 0
    Driving Strength Profiles
    Driving Strength ..........................: 1066
    Channel A
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment......................: Auto=0
    tRD Phase1 Adjustment......................: Auto=0
    tRD Phase2 Adjustment .....................: Auto=0
    tRD Phase3 Adjustment......................: Auto=0
    Trd2rd(Different Rank).....................: Auto=6 
    Twr2wr(Different Rank).....................: Auto=6
    Twr2rd(Different Rank).....................: Auto=5
    Trd2wr(Same/Diff Rank).....................: Auto=8
    Dimm1 Clock Skew Control...................: Auto  ps
    Dimm2 Clock Skew Control...................: Auto  ps
    Channel B
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment......................: Auto=0 
    tRD Phase1 Adjustment......................: Auto=0
    tRD Phase2 Adjustment .....................: Auto=0
    tRD Phase3 Adjustment......................: Auto=0
    Trd2rd(Different Rank).....................: Auto=6 
    Twr2wr(Different Rank).....................: Auto=6 
    Twr2rd(Different Rank).....................: Auto=5 
    Trd2wr(Same/Diff Rank).....................: Auto=8 
    Dimm1 Clock Skew Control...................: Auto  ps
    Dimm2 Clock Skew Control...................: Auto  ps
    Motherboard Voltage Control
    CPU
    Load-Line Calibration......................: [Enabled] i dont have this option.
    CPU Vcore............1.25000V..............: 1.325V
    CPU Termination......1.200V*...............: Auto
    CPU PLL..............1.500V*...............: Auto
    CPU Referen..........0.760V*...............: Auto
    MCH/ICH
    MCH Core.............1.100V................: 1.24V  
    MCH Reference........0.760V................: Auto
    MCH/DRAM Ref.........0.900V................: Auto
    ICH I/O..............1.500V................: Auto
    ICH Core.............1.100V................: Auto
    DRAM
    DRAM Voltage ........2.000V................: 2.100V
    DRAM Termination.....0.900V................: Auto
    Channel A Reference..0.900V................: Auto
    Channel B Reference..0.900V................: Auto
    Advanced Settings
    Limit CPUID Max. to 3......................: [Disabled]
    No-Execute Memory Protect..................: [Enabled]
    CPU Enhanced Halt (C1E)....................: [Disabled]
    C2/C2E State Support.......................: [Disabled]
    x C4/C4E State Support.....................: [Disabled]
    CPU Thermal Monitor 2(TM2) ................: [Enabled]
    CPU EIST Function..........................: [Enabled]
    Virtualization Technology..................: [Enabled] 
    Integrated Peripherals
    Legacy USB Storage Detect .................: [Enabled]

    CPU-Z Validator 3.1

    i did all this before your post Conners. i will try those settings out i do see alot that i havent set that is auto that you have a value in.. im only running these at 902mhz so they are underclocked. which is a good thing for now. shows me i still have room for 4.0ghz+..lol

    yup im sold on these G-skill sticks... thanks Bigwill for lending them to me.... dont know if i want ot pull them out..lol

    i know it is only 37 mins of priming but i think htere good to go. i will let it run allnight when i goto bed tonight...
    GA-EP45-UD3P 1.6rev
    Q9550 @ 451x8.5 3.83ghz SLB8V 1.296 vcore in bios
    Batch #L846B715
    G-Skill ddr2 1066 2x1gb running at 1082mhz??
    OCZ Vendetta 2 with 120mm fan
    Corsair HX650w PSU with a 120mm fan
    Nvidia GeForce 8800 GTS
    WD2500AAKS
    WD3200AAKS
    WD500GB GP
    WD1001FALS
    All housed in the Big Red Hemi
    CM HAF 922 1X200MM,2X200MM RED LED & 1x140mm rear fan
    Burners=
    Sony Optaric Nec AD7220S
    Sony Optaric Nec AD7240S
    Lite-on IHAS324-9-A x2

  6. #66
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Why run em under clocked if you don't have to?

  7. #67
    Join Date
    Sep 2009
    Location
    ohio, usa
    Posts
    94

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Quote Originally Posted by Conners View Post
    Why run em under clocked if you don't have to?
    oh i agree. i just had them there just to make sure i had enough vcore on the cpu. get it stable the nwork the mem... after dinner i will work on those settings you posted.. might even try 3.96ghz ;)
    GA-EP45-UD3P 1.6rev
    Q9550 @ 451x8.5 3.83ghz SLB8V 1.296 vcore in bios
    Batch #L846B715
    G-Skill ddr2 1066 2x1gb running at 1082mhz??
    OCZ Vendetta 2 with 120mm fan
    Corsair HX650w PSU with a 120mm fan
    Nvidia GeForce 8800 GTS
    WD2500AAKS
    WD3200AAKS
    WD500GB GP
    WD1001FALS
    All housed in the Big Red Hemi
    CM HAF 922 1X200MM,2X200MM RED LED & 1x140mm rear fan
    Burners=
    Sony Optaric Nec AD7220S
    Sony Optaric Nec AD7240S
    Lite-on IHAS324-9-A x2

  8. #68
    Join Date
    Sep 2009
    Location
    Cincinnati
    Posts
    31

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    thanks Bigwill for lending them to me.... dont know if i want ot pull them out..lol
    no problem...you know...I've been using them on all my Oc'ing's even on the I 45 T-Power with the Q9550 at 3915GHz stable try and run them at 1090/2= 545mhz they will
    do it and stay Cool to the touch Right now..I got My KingtonHyperX's running at 1090 at the same as when...I took them G.Skills out and lended you for the weekend...I'm glad you like the test drive them...remember bring them back with a full tank of gas and washed clean...lol

    Your Welcome Cincy

    Hey give me Call tonight

    I got a burner you can test out too
    Last edited by Bigwill68; 10-11-2009 at 07:40 AM.


    switching around cpu below
    Biostar I45 with my (E8400 EO)
    Gigabyte EP45-UD3P Rev 1.6
    With My Q9550 on the Biostar T-Power I45
    Gigabyte EP35C-DS3R Rev 2.1 With the Quad in!

  9. #69
    Join Date
    Sep 2009
    Location
    ohio, usa
    Posts
    94

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    should i try a higher OC seeing i know i got a good setting for the mem? maybe take it up to 3.96ghz + or so? before working the mem to 1066+?
    GA-EP45-UD3P 1.6rev
    Q9550 @ 451x8.5 3.83ghz SLB8V 1.296 vcore in bios
    Batch #L846B715
    G-Skill ddr2 1066 2x1gb running at 1082mhz??
    OCZ Vendetta 2 with 120mm fan
    Corsair HX650w PSU with a 120mm fan
    Nvidia GeForce 8800 GTS
    WD2500AAKS
    WD3200AAKS
    WD500GB GP
    WD1001FALS
    All housed in the Big Red Hemi
    CM HAF 922 1X200MM,2X200MM RED LED & 1x140mm rear fan
    Burners=
    Sony Optaric Nec AD7220S
    Sony Optaric Nec AD7240S
    Lite-on IHAS324-9-A x2

  10. #70
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Sure try these for 4.12 GHz lol

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................: .5
    CPU Frequency ...........................: 4122 (485*8.5)
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 485 Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    C.I.A.2 .................................:[Disabled]
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0ps 
    MCH Clock Skew (ps)...................: 0ps 
    
    DRAM Performance Control
    Performance Enhance...................: [Turbo]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 970 MHz
    DRAM Timing Selectable ................: [Manual]
    Standard Timing Control
    CAS Latency Time........................: 5
    tRCD ......................................: 5
    tRP'........................................: 5
    tRAS.........................................: 15
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    Advanced Timing Control
    tRRD...........................................: 4
    tWTR...........................................: 4
    tWR............................................: 6
    tRFC...........................................: 54
    tRTP...........................................: 4
    Command Rate (CMD) ....................: 2
    Driving Strength Profiles
    Driving Strength ............................ 1066
    Channel A
    Static tRead Value.........................: 10
    tRD Phase0 Adjustment...................: Auto 
    tRD Phase1 Adjustment...................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto 
    Twr2wr(Different Rank)...................: Auto 
    Twr2rd(Different Rank)...................: Auto 
    Trd2wr(Same/Diff Rank)..................: Auto 
    Dimm1 Clock Skew Control...............: Auto  ps
    Dimm2 Clock Skew Control...............: Auto  ps
    Channel B
    Static tRead Value.........................: 10
     tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................: Auto
     tRD Phase2 Adjustment .................: Auto
     tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto 
    Twr2wr(Different Rank)...................: Auto 
    Twr2rd(Different Rank)...................: Auto 
    Trd2wr(Same/Diff Rank)..................: Auto 
    Dimm1 Clock Skew Control...............: Auto  ps
    Dimm2 Clock Skew Control...............: Auto  ps
    Motherboard Voltage Control
    CPU
    CPU Vcore............1.25000V.............: 1.36250V
    CPU Termination…..... 1.200V*.......: 1.340V
    CPU PLL...............1.500V*.......: 1.570V
    CPU Reference......0.755V*..........: .873 
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.320V 
    MCH Reference….…….0.760V...........: .888
    MCH/DRAM Ref.…......0.900V...........: 1.010V
    ICH I/O……………….....1.500V............: 1.500V
    ICH Core…………...……1.100V............: 1.100V
    DRAM
    DRAM Voltage ……....1.800V............: 2.120V
    DRAM Termination .…0.900V............: 1.010V
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

Page 7 of 12 FirstFirst ... 56789 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •