Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 9 of 12 FirstFirst ... 7891011 ... LastLast
Results 81 to 90 of 118

Thread: OCing a Q9550 on a GA-EP45-DS3R




  1. #81
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Quote Originally Posted by cincyrob View Post
    where all the info to the right i need to actually set it, take it out of auto and put them to those settings? cause if you look at what i have it has those setting preset for auto.
    EasyTune -> Tuner -> Advanced -> Voltage tab, target values are what is set by auto.

  2. #82
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Yeah Rob set those manually in your bios..

  3. #83
    Join Date
    Sep 2009
    Location
    ohio, usa
    Posts
    94

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    ok i havent been able to do anythign with it today, but my wife told me it turned off and started back up on its own twice. i dont know if my sons hit the power button or what that has happend a few times here lately.... but hte last time it did that i had the dominators and 1 stick was bad. tonight after work im going to run memtest again on each stick just to make sure..
    GA-EP45-UD3P 1.6rev
    Q9550 @ 451x8.5 3.83ghz SLB8V 1.296 vcore in bios
    Batch #L846B715
    G-Skill ddr2 1066 2x1gb running at 1082mhz??
    OCZ Vendetta 2 with 120mm fan
    Corsair HX650w PSU with a 120mm fan
    Nvidia GeForce 8800 GTS
    WD2500AAKS
    WD3200AAKS
    WD500GB GP
    WD1001FALS
    All housed in the Big Red Hemi
    CM HAF 922 1X200MM,2X200MM RED LED & 1x140mm rear fan
    Burners=
    Sony Optaric Nec AD7220S
    Sony Optaric Nec AD7240S
    Lite-on IHAS324-9-A x2

  4. #84
    Join Date
    Sep 2009
    Location
    Cincinnati
    Posts
    31

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Ro why is the CPU EIST Function..........................: [Enabled]
    Should'en it be Disabled?


    switching around cpu below
    Biostar I45 with my (E8400 EO)
    Gigabyte EP45-UD3P Rev 1.6
    With My Q9550 on the Biostar T-Power I45
    Gigabyte EP35C-DS3R Rev 2.1 With the Quad in!

  5. #85
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Quote Originally Posted by Bigwill68 View Post
    Ro why is the CPU EIST Function..........................: [Enabled]
    Should'en it be Disabled?
    IMO it really shouldn't make a diffrence.

  6. #86
    Join Date
    Sep 2009
    Location
    ohio, usa
    Posts
    94

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    i think that was a typo on my part it isnt enabled.

    well heres the scoop guys
    i still ahvent been able to do anything with this since ive gotten the 1066 mem but i plan to in the morning(monday) but i did just order my new mobo. nope not a gigabyte
    ASUS P5Q Deluxe. so in about 5 days i will need info for it..lol ill start another thread. im gonna put my E8400 back on this board
    GA-EP45-UD3P 1.6rev
    Q9550 @ 451x8.5 3.83ghz SLB8V 1.296 vcore in bios
    Batch #L846B715
    G-Skill ddr2 1066 2x1gb running at 1082mhz??
    OCZ Vendetta 2 with 120mm fan
    Corsair HX650w PSU with a 120mm fan
    Nvidia GeForce 8800 GTS
    WD2500AAKS
    WD3200AAKS
    WD500GB GP
    WD1001FALS
    All housed in the Big Red Hemi
    CM HAF 922 1X200MM,2X200MM RED LED & 1x140mm rear fan
    Burners=
    Sony Optaric Nec AD7220S
    Sony Optaric Nec AD7240S
    Lite-on IHAS324-9-A x2

  7. #87
    Join Date
    Sep 2009
    Location
    ohio, usa
    Posts
    94

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    ok guys heres the link to my new thread for overclocking hte Q9550 on the ASUS P5Q Deluxe

    http://forums.tweaktown.com/f19/over...43/#post329845
    GA-EP45-UD3P 1.6rev
    Q9550 @ 451x8.5 3.83ghz SLB8V 1.296 vcore in bios
    Batch #L846B715
    G-Skill ddr2 1066 2x1gb running at 1082mhz??
    OCZ Vendetta 2 with 120mm fan
    Corsair HX650w PSU with a 120mm fan
    Nvidia GeForce 8800 GTS
    WD2500AAKS
    WD3200AAKS
    WD500GB GP
    WD1001FALS
    All housed in the Big Red Hemi
    CM HAF 922 1X200MM,2X200MM RED LED & 1x140mm rear fan
    Burners=
    Sony Optaric Nec AD7220S
    Sony Optaric Nec AD7240S
    Lite-on IHAS324-9-A x2

  8. #88
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    Good luck with this...

  9. #89
    Join Date
    Sep 2009
    Location
    ohio, usa
    Posts
    94

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    ok guys here i go again. first i ran memtest86 for 45 mins no errors all passed. so im not worried about hte mem being bad.
    so i took it up to 3.77ghz 444x8.5 i have the mem running at 1066 2.40b strap. i ran IBT only passed 4 out of 5 test on 1/4 mem usage.
    i allready have the MCH up to 1.26 and the dram volts to 2.12v im wondering if i might need more vcore. i have it set in bios at 1.300v but this dand vdrop is awfull



    what try 1.3250v and see how it goes?



    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ......................: Fast
    CPU Clock Ratio .................................: 8
    Fine CPU Clock Ratio............................: 0.5
    CPU Frequency ..................................: 3.77ghz(444*8.5)
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control........................: [Enabled] 
    CPU Host Frequency (Mhz) ..................: 444 MHz
    PCI Express Frequency (Mhz) ...............: 100
    C.I.A.2 .............................................: [Disabled]
    Advanced Clock Control [Press Enter]
    CPU Clock Drive..................................: <<< 800
    PCI Express Clock Drive........................: <<< 900
    CPU Clock Skew (ps)...........................: <<< 0ps
    MCH Clock Skew (ps)..........................: <<< 0ps
    DRAM Performance Control
    Performance Enhance..........................: [STANDARD]
    Extreme Memory Profile (X.M.P.)............: [Disabled]
    (G)MCH Frequency Latch......................: [Auto]
    System Memory Multiplier ....................: [2.40B]
    Memory Frequency (Mhz) ....................: 1066
    DRAM Timing Selectable ......................: [Manual]
    Standard Timing Control
    CAS Latency Time..............................: 5
    tRCD ...............................................: 5
    tRP'.................................................: 5
    tRAS...............................................: 15
    Advanced Timing Control
    tRRD...............................................: 4
    tWTR..............................................: 4
    tWR................................................: 8    
    tRFC...............................................: 56
    tRTP...............................................: 4
    Command Rate (CMD) .......................: 2
    Driving Strength Profiles
    Driving Strength ..............................: 1066
    Channel A
    Static tRead Value...........................: 11
    tRD Phase0 Adjustment.....................: Auto
    tRD Phase1 Adjustment.....................: Auto
    tRD Phase2 Adjustment ....................: Auto
    tRD Phase3 Adjustment.....................: Auto
    Trd2rd(Different Rank)......................: Auto 
    Twr2wr(Different Rank).....................: Auto 
    Twr2rd(Different Rank)......................: Auto 
    Trd2wr(Same/Diff Rank)....................: Auto 
    Dimm1 Clock Skew Control.................: Auto  ps
    Dimm2 Clock Skew Control.................: Auto  ps
    Channel B
    Static tRead Value............................: 11
    tRD Phase0 Adjustment......................: Auto 
    tRD Phase1 Adjustment......................: Auto
    tRD Phase2 Adjustment .....................: Auto
    tRD Phase3 Adjustment......................: Auto
    Trd2rd(Different Rank).......................: Auto  
    Twr2wr(Different Rank)......................: Auto  
    Twr2rd(Different Rank)......................: Auto 
    Trd2wr(Same/Diff Rank).....................: Auto 
    Dimm1 Clock Skew Control...................: Auto  ps
    Dimm2 Clock Skew Control...................: Auto  ps
    Motherboard Voltage Control
    CPU
    Load-Line Calibration.........................: [Enabled] i dont have this option.
    CPU Vcore............1.25000V..............: 1.3000V
    CPU Termination......1.200V*..............: 1.200v
    CPU PLL..............1.500V*.................: 1.500v
    CPU Referen..........0.760V*...............: .760
    MCH/ICH
    MCH Core.............1.100V.................: 1.26V  
    MCH Reference........0.760V...............: Auto
    MCH/DRAM Ref.........0.900V..............: Auto
    ICH I/O..............1.500V...................: 1.500v
    ICH Core.............1.100V..................: i dont have this option
    DRAM
    DRAM Voltage ........2.000V................: 2.12V
    DRAM Termination.....0.900V...............: Auto
    Channel A Reference..0.900V..............: Auto
    Channel B Reference..0.900V..............: Auto
    Advanced Settings
    Limit CPUID Max. to 3........................: [Disabled]
    No-Execute Memory Protect...............: [Enabled]
    CPU Enhanced Halt (C1E)...................: [Disabled]
    C2/C2E State Support.......................: [Disabled]
    x C4/C4E State Support.....................: [Disabled]
    CPU Thermal Monitor 2(TM2) ..............: [Enabled]
    CPU EIST Function............................: [Disabled]
    Virtualization Technology...................: [Enabled] 
    Integrated Peripherals
    Legacy USB Storage Detect ..............: [Enabled]
    Last edited by cincyrob; 11-02-2009 at 09:02 PM.
    GA-EP45-UD3P 1.6rev
    Q9550 @ 451x8.5 3.83ghz SLB8V 1.296 vcore in bios
    Batch #L846B715
    G-Skill ddr2 1066 2x1gb running at 1082mhz??
    OCZ Vendetta 2 with 120mm fan
    Corsair HX650w PSU with a 120mm fan
    Nvidia GeForce 8800 GTS
    WD2500AAKS
    WD3200AAKS
    WD500GB GP
    WD1001FALS
    All housed in the Big Red Hemi
    CM HAF 922 1X200MM,2X200MM RED LED & 1x140mm rear fan
    Burners=
    Sony Optaric Nec AD7220S
    Sony Optaric Nec AD7240S
    Lite-on IHAS324-9-A x2

  10. #90
    Join Date
    Sep 2009
    Location
    ohio, usa
    Posts
    94

    Default Re: OCing a Q9550 on a GA-EP45-DS3R

    ok guys got it IBT stable and running prime95 now and all is good. i went and changed the vcore from 1.30v to 1.3125v and the MCH up to 1.28v from 1.26v guess i should have changed only 1 thing at a time to see which one it really needed.


    in CPUz on the vcore before IBT startedmy vcore was 1.264v once the test started it would drop down to 1.200-1.216v??? this is crappy. well its nice it is that low but what i ment is i set it for 1.3125v and it drops that much...lol
    GA-EP45-UD3P 1.6rev
    Q9550 @ 451x8.5 3.83ghz SLB8V 1.296 vcore in bios
    Batch #L846B715
    G-Skill ddr2 1066 2x1gb running at 1082mhz??
    OCZ Vendetta 2 with 120mm fan
    Corsair HX650w PSU with a 120mm fan
    Nvidia GeForce 8800 GTS
    WD2500AAKS
    WD3200AAKS
    WD500GB GP
    WD1001FALS
    All housed in the Big Red Hemi
    CM HAF 922 1X200MM,2X200MM RED LED & 1x140mm rear fan
    Burners=
    Sony Optaric Nec AD7220S
    Sony Optaric Nec AD7240S
    Lite-on IHAS324-9-A x2

Page 9 of 12 FirstFirst ... 7891011 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •