Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Please Help, New Build Wont Boot!!




  1. #1

    Default Please Help, New Build Wont Boot!!

    New build wont boot!

    Hello,
    I've just put together an i7 920/ gigabyte ex58 u3dr / Coolermaster V8 / Ocz 1600 Gold DDR3 / ocz stealth xtreme 700w / 2 x Asus EAH 4350.

    I've got the bare bones layed out : Cooler on . Processor in. Main power and One graphics card in pci.
    The cooler spins up but there is no display on the monitor.

    Any ideas or fault finding tests?

    Thanks, any help would be great!!

    Anthony

  2. #2

    Default Re: Please Help, New Build Wont Boot!!

    Welcome to Tweaktown! You certainly have come to the right place. Lucky you, i also use the UD3R.

    You will need to be much more specific about the issue. You will also need to give us complete system details . Tell us everything you can, the more the better. Start with you board revision, is it 1.0, or 1.6? The i7, is it a C0 or D0 stepping chip? You say the cooler spins up but there is no display, does it stay on like this or shut down ? Can you enter the BIOS? Try swapping those video cards since you have 2 of em. Double check all your connections.
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

  3. #3
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Please Help, New Build Wont Boot!!

    make sure your rams plugged into the white slots not the blue as it wont boot up,try clearing the cmos with the button on the back of the board ...also make sure your gpu is plugged into a pci-e slot and not a pci slot check manual...but for ram its the white slots
    Last edited by wazza300; 09-27-2009 at 12:44 AM.
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #4

    Default Re: Please Help, New Build Wont Boot!!

    Ok So. its an 1.0 Board.
    The processor is a

    i7 920. VER E63261-002 08/10/09
    PRod Code : BX80601920

    There is no display atall, after having plugged in a speaker there is no beep or sound when booting. The 4 leds come on when powering the system and it stays on indefinately - does not restart.

    I have the graphics card plugged into the blue slot with the clip.
    The ram is only in the white slots - Ocz pc3 12800 on sticker.

    Apart from powering on the board seems dead. no display on either g.cards.

    So To recap, no bios entry no visual of any kind, check on two monitors..
    Please run me through the Cmos clear - the red button on back?

    Thankyou for your help!!

  5. #5

    Default Re: Please Help, New Build Wont Boot!!

    You will see a set of pins labeled clrcmos in the lower right hand of the board if you are looking at it mounted in the case standing up, to the left of the SATA ports. I have only had to clear it once myself and did this by unplugging the power supply,then push the power button a few times to be sure all the juice is out of the system. Take a screwdriver and touch it to the pair of pins on the RIGHT side for a few seconds and let her sit for a minute.

    Others will say use a jumper, mine did not come with one and a screwdriver does the same job plus its easier to get in there with. Do a search on clearing cmos to get a better idea how this works. Here is a diagram of the board , look next to the SATA ports and you will see the pins, they have a black base. You must look closely.

    Windwithme?s Core i7 review Part 8 - GIGABYTE EX58-UD3R Entry Version

    Go ahead and give it try.
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

  6. #6

    Default Re: Please Help, New Build Wont Boot!!

    Still no go Im afraid, any other thought...

    Starting to think the board may be dead? is this likely? It powers on but there is no bios or boot.

  7. #7

    Default Re: Please Help, New Build Wont Boot!!

    Let me remind you, i only had to clear cmos once when my system went into a continuous reboot cycle and nothing else would stop it . This was my last resort. And it worked. If you feel nothing else will work, or are just plain tired of it . Go for it. Good luck bro.
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

  8. #8

    Default Re: Please Help, New Build Wont Boot!!

    It didn't work.....

    :(

  9. #9
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Please Help, New Build Wont Boot!!

    Quote Originally Posted by TonyMatchett View Post
    It didn't work.....

    :(
    try re-seating heatsink.. if its badly fitted cpu will overheat and cause automatic shutdown and loop make sure you cables are plugged in propperly 8pin cpu cable 24 pin motherboard did you use the brass stand offs underneath motherboard?? make sure you use them when installing in the case as it will short
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #10

    Default Re: Please Help, New Build Wont Boot!!

    oh you cleared it and still nothing? hmmmmm.... Next up, try booting with 1 stick of RAM.
    i7 930 @ 4.2 ghz (200x21) 1.34 vcore 1.33 qpi
    Noctua U12P se1366 Push Pull w/scythe slipstreams
    6GBOCZ1333 @ 1600 - 9 9 9 24 1.64v
    Gigabyte EX58-UD3R f11
    Corsair tx750 PSU
    EVGA GTX260 SC
    Intel SSD80GBG2C1 OS/Apps
    WD Caviar Black 500gb Data
    ASUS Xonar DX
    Klipsch Promedia 2.1
    CM690 Case 3 in 3 out
    Windows 7 64bit

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •