Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 14 FirstFirst ... 34567 ... LastLast
Results 41 to 50 of 131

Thread: Bought a Q9550. The quest for 4Ghz starts now.




  1. #41

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Here is my 4GHz template, maybe it helps you

    Robust Graphics Booster.........................[ Auto ]
    CPU Clock Ratio.................................[ 8.0 ]
    Fine CPU Clock Ratio............................[ +0.5 ]
    CPU Frequency............................[ 475x8.5 ]

    ******Clock Chip Control******

    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 475 ]
    PCI Express Frequency (Mhz).....................[ 100 ]
    C.I.A 2.........................................[ Disabled ]

    ******Advanced Clock Control******

    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 0ps ]

    ******DRAM Performance Control******

    Performance Enhance.............................[ Turbo ]
    Extreme Memory Profile (X.M.P)..................[ Auto ]
    (G) MCH Frequency Latch.........................[ Auto ]
    System Memory Multipler.........................[ 2.00D ]
    Memory Frequency 1066...........................[ 950 ]
    DRAM Timing Selectable..........................[ Manual ]

    CAS Latency Time................................[ 5 ]
    tRCD............................................[ 5 ]
    tRP.............................................[ 5 ]
    tRAS............................................[ 15 ]

    ******Motherboard Voltage Control******

    Load-Line Calibration...........................[ Enabled ]
    CPU Vcore [ 1.1875 ]...................[ 1.300 ]
    CPU Termination [ 1.20 ]...................[ 1.300 ]
    CPU PLL [ 1.50 ]...................[ 1.500 ]
    CPU Reference [ 0.760 ]...................[ 0.848]
    MCH Core [ 1.100 ]...................[ 1.320 ]
    MCH Reference [ 0.760 ]...................[ 0.863 ]
    MCH/DRAM Refernce [ 0.900 ]...................[ Auto ]
    ICH I/O [ 1.500 ]...................[ Auto ]
    ICH Core [ 1.100 ]...................[ Auto ]

    DRAM Voltage [ 1.800 ]...................[ 2.000 ]
    DRAM Termination [ 0.900 ]...................[ Auto ]
    Channel A Ref [ 0.900 ]...................[ Auto ]
    Channel B Ref [ 0.900 ]...................[ Auto ]

  2. #42

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Thanks for the info aquax. What mobo do you have?
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

  3. #43

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Quote Originally Posted by lodingi View Post
    thanks for the info aquax. What mobo do you have?
    p45-ud3r

  4. #44

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Well just when you thought things were going well......When I turned on my computer after being out of town for a few days, I had some issues.

    On my first boot, I logged into windows and got a BSOD. The code was all zeros. I tried to boot again, this time tinkering with MCH & vcore. When I raised the MCH, I would get past the post screen, start loading Windows and the screen would go black.

    I backed down on the MCH and was able to get into Windows again. After about 1 minute, I got another BSOD. This time the code ended in 1E. So this time I go into the bios and load the optimized defaults. It took 3 tries to get into Windows with the optimized settings.

    Everything seems to be ok at this point. I am back to stock settings. WTH happened?
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

  5. #45
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Were BIOS settings preserved?

  6. #46

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Yes they were. I'm going to try the same settings today.
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

  7. #47
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Maybe clear CMOS and load optimized defaults before you do, and then laod saved profile or enter them manually.

  8. #48
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Well well Lodingi, hope everything is going well for you. I forgot where you were at on your OC.

  9. #49

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Quote Originally Posted by Conners View Post
    Well well Lodingi, hope everything is going well for you. I forgot where you were at on your OC.
    You silly man. Btw, watching Texas / OU as I type.
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

  10. #50

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Ok. I cleared the cmos for 45 minutes. I then turned on the computer, loaded optimized defaults, saved & exit. I went into the bios and entered the following. I should note I reinstalled the 2 dimms I removed last week. I am now running 4x2gb DDR2 1000. I can get into windows, however IBT fails on the second pass. Where should I go from here.


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 8.5
    Fine CPU Clock Ratio.....................: +0.5
    CPU Frequency ...........................: 3613


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: Disabled
    CPU Host Frequency (Mhz) ............: 425
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: Auto
    System Memory Multiplier ..............:2.40B
    Memory Frequency (Mhz) ..............:1020
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15

    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................68
    tRTP...........................................4
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ Auto <-- 1066

    Channel A
    Static tRead Value.........................: Auto <-- 9
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............: Auto ps
    Dimm2 Clock Skew Control...............: Auto ps

    Channel B
    Static tRead Value.........................: Auto <-- 9
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............: Auto ps
    Dimm2 Clock Skew Control...............: Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual

    CPU
    CPU Vcore….……….........................:1.25
    CPU Termination…..... 1.200V*.......:1.24
    CPU PLL…………………....1.500V*.......:1.50
    CPU Referen.…………....0.755V*.......: 0.76

    MCH Core…………….....1.100V...........: 1.10
    MCH Reference….…….0.800V...........:0.760
    MCH/DRAM Ref.…......0.900V...........: 0.900
    ICH I/O……………….....1.550V............:1.570

    DRAM
    DRAM Voltage ……....1.800V............: 2.10
    DRAM Termination .…0.900V............: 0.90
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals

    Legacy USB Storage Detect ..............[Disabled]
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

Page 5 of 14 FirstFirst ... 34567 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •