Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 8 of 14 FirstFirst ... 678910 ... LastLast
Results 71 to 80 of 131

Thread: Bought a Q9550. The quest for 4Ghz starts now.




  1. #71

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Here are my current bios settings.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 8.5
    Fine CPU Clock Ratio.....................: +0.5
    CPU Frequency ...........................: 3780


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: Disabled
    CPU Host Frequency (Mhz) ............: 445
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: Auto
    System Memory Multiplier ..............:2.00D
    Memory Frequency (Mhz) ..............:890
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................15

    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................4
    tWR............................................8
    tRFC...........................................68
    tRTP...........................................4
    Command Rate (CMD) ................2

    Driving Strength Profiles
    Driving Strength ............................ Auto <-- 1066

    Channel A
    Static tRead Value.........................: Auto <-- 9
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............: Auto ps
    Dimm2 Clock Skew Control...............: Auto ps

    Channel B
    Static tRead Value.........................: Auto <-- 9
    tRD Phase0 Adjustment...................: Auto
    tRD Phase1 Adjustment...................: Auto
    tRD Phase2 Adjustment .................: Auto
    tRD Phase3 Adjustment..................: Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............: Auto ps
    Dimm2 Clock Skew Control...............: Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual

    CPU
    CPU Vcore….……….........................:1.275
    CPU Termination…..... 1.200V*.......:1.24
    CPU PLL…………………....1.500V*.......:1.50
    CPU Referen.…………....0.755V*.......: 0.77

    MCH Core…………….....1.100V...........: 1.10
    MCH Reference….…….0.800V...........:0.785 - It goes from .76 to .785
    MCH/DRAM Ref.…......0.900V...........:1.05
    ICH I/O……………….....1.550V............:1.50

    DRAM
    DRAM Voltage ……....1.800V............: 2.10
    DRAM Termination .…0.900V............: 1.05
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings

    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals

    Legacy USB Storage Detect ..............[Disabled]

    I just failed IBT, 10 pass, small FFT. It failed on the 8th pass.
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

  2. #72
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Is your CPU & MCH Reference voltage default .755?

    May play with MCH Core up or down a few notches.

    Might 1.57 on CPU PLL and see what happens.

    Might try +1 on CPU Termination.

    Do these sugestion one at a time and test and see if it made it better or worse.

  3. #73
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Quote Originally Posted by Conners View Post
    Is your CPU & MCH Reference voltage default .755?
    Last ET6 screen capture showed 0.760(63%) so that's probably the default. Current settings are 62% vtt so it's hard to tell. Might have not updated it from 1.22v(default 0.772) vtt?

  4. #74
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Thanks chike I was just seeing his template and it showed .755 is why I asked...

  5. #75

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    These are the stable 3.7 settings.





    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

  6. #76
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    IBT has no FFT, do you mean level stress standard?
    What GFlops you get with IBT?

  7. #77
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    CPU Referen.…………....0.755V*.......: 0.77

    MCH Reference….…….0.800V...........:0.785 - It goes from .76 to .785


    In red is what I am talking about...just nip picking I guess, but accuracy in not only important but everything a dude once told me.
    Last edited by Conners; 10-24-2009 at 07:31 AM.

  8. #78

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Quote Originally Posted by Chike View Post
    IBT has no FFT, do you mean level stress standard?
    What GFlops you get with IBT?
    Yes, standard stress. I get 48 gflops on standard & 51 gflops with 90% ram usage.

    Quote Originally Posted by Conners View Post
    CPU Referen.…………....0.755V*.......: 0.77

    MCH Reference….…….0.800V...........:0.785 - It goes from .76 to .785


    In red is what I am talking about...just nip picking I guess, but accuracy in not only important but everything a dude once told me.
    Nit picking is what I want. Do I use the red text settings?
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

  9. #79
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Please change your template to this, it helps us know what your defaults are.

    CPU Vcore….….1.25000V.......................:1.275 <--Your bios says 1.26875 you post 1.275... your vid is 1.2500
    CPU Termination…..... 1.200V*.......:1.24
    CPU PLL…………………....1.500V*.......:1.50
    CPU Referen.…………....0.760V*.......: 0.77 <-- Default is .760 not .755

    MCH Core…………….....1.100V...........: 1.10
    MCH Reference….…….0.760V...........:0.785 - <-- Default is .760 not .800

    Thank you Loadingi

  10. #80

    Default Re: Bought a Q9550. The quest for 4Ghz starts now.

    Am I raising the fsb?
    Antec Twelve Hundred Case**Gigabyte EP45-UD3P Rev 1.1 - F8 BIOS**BFG EX-1000 PSU**Intel Q9550 @ Stock**CM Hyper-212 Plus Cooler**G.Skill 4x2 GB DDR2 1000**2xWD 1TB Caviar Black 32MB Cache Raid0**Maxtor One Touch 4 Plus 1 TB **Vision-Tek Radeon 4870X2 (2 gig)**Asus VE276Q 27" Monitor**Win7 Ultimate 64

Page 8 of 14 FirstFirst ... 678910 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •