Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: EP43-DS3 reboots with 4G Kingston ram




  1. #1
    Join Date
    Sep 2009
    Posts
    2

    Default EP43-DS3 reboots with 4G Kingston ram

    Hi
    I am looking for some advise and help with this build
    GA-EP43DS3 Bios F9
    Intel E7500 2.93GHz
    Kingston 4x KVR1066D2N7/1G
    Inno3d geforce 9800gt 512mb ddr3
    Seagate ST3160813AS
    Antec Neo HE550
    www.valueram.com/datasheets/KVR1066D2N7_1G.pdf[/URL]
    I have played with the setting for 2g and system seem to run fine in duel channel but as soon as i put the other 2g in system keeps on rebooting i have swaped memory around and run mem test with no errors so i believe i still need to change some more setting or start again but this is where i am stuck so need some help
    Many thanks

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:[Auto]
    CPU Clock Ratio ..........................:11x
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................:2.93mhz 266x11
     
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............:266mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    C.I.A.2 .................................:[Disabled]
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................:800mv
    PCI Express Clock Drive.................:900mv
    CPU Clock Skew (ps)....................:0ps
    MCH Clock Skew (ps)...................:0ps
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............:[Auto]
    Memory Frequency (Mhz) ..............:1066mhz
    DRAM Timing Selectable ................: [Manual]
    Standard Timing Control
    CAS Latency Time........................7
    tRCD .........................................7
    tRP'...........................................7
    tRAS..........................................24
    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................14
    tWR............................................18
    tRFC...........................................58
    tRTP...........................................6
    Command Rate (CMD) ....................:[Auto]
    Driving Strength Profiles
    Driving Strength ............................
    Channel A
    Static tRead Value.........................:[Auto]
    tRD Phase0 Adjustment...................:[Auto]
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    Channel B
    Static tRead Value.........................:[Auto]
    tRD Phase0 Adjustment...................:[Auto]
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto
    CPU Termination…..... 1.200V*.......:Auto
    CPU PLL…………………....1.500V*.......:Auto
    CPU Referen.…………....0.755V*.......:Auto
    CPU Reference2………,,0.800V*.......:Auto
    MCH/ICH
    MCH Core…………….....1.100V...........:Auto
    MCH Reference….…….0.800V...........:Auto
    MCH/DRAM Ref.…......0.900V...........:Auto
    ICH I/O……………….....1.550V............:Auto
    ICH Core…………...……1.100V............:Auto
    DRAM
    DRAM Voltage ……....1.800V............:1.800v
    DRAM Termination .…0.900V............:Auto
    Channel A Reference 0.900V............:Auto
    Channel B Reference 0.900V............:Auto
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization[SIZE=2[/URL]] Technology................: [Disabled] Enabled if you use Vmware/Virtual PC[/SIZE]
    Integrated Peripherals
    Legacy USB Storage[SIZE=2[/URL]] Detect ..............[Disabled] *Note* Must be enabled to flash from USB[/SIZE]

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP43-DS3 reboots with 4G Kingston ram

    The link you provided is for a single 1GB modules, are you using 4 of those?

    Are those your settings
    Code:
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    And memory shows 1066? It doesn't add up.


    Could you post a screen capture of MemSet main and spd(click spd) windows?

    For more than 2x1GB of ram more MCH Core is usually needed, in more rare case less is needed.
    Please load optimized defaults with 2GB ram first, then make the following changes
    Code:
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    
    MCH Core…………….....1.100V...........:1.20v
    Save the changes reboot, then shut it down and install the other 2GB.
    If system fail to boot, let it try 5-7 times, then turn the PSU Off for ~20 seconds, turn it on and try again. You may need to repeat this process more than once. When the pc boots up enter BIOS MIT (a red warning will show) and make nesessary changes, save and reboot until it boot normally.
    Try MCH Core in the range 1.2-1.26v, usually you will find the right value within this range, otherwise try values in the range of 1.05-0.95v.

    If you manage to boot run 6+ passes of memtest86+, before you go into windows, to make sure you don't get memory errors.

    MemSet and memtest86+ and other usfeul programs can be found in http://forums.tweaktown.com/f69/late...30/#post284762

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •