Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 6 FirstFirst ... 456
Results 51 to 55 of 55

Thread: Prime95 won't run at 100%




  1. #51
    Join Date
    Sep 2009
    Posts
    32

    Default Re: Prime95 won't run at 100%

    Quote Originally Posted by Conners View Post
    I thought you were running 5 5 5 15?
    I am I was just going to see if I could loosen it up, not sure if it would have posted because I had that 48 in there.

    This correct now

    Code:
    MB Intelligent Tweaker(M.I.T.) 
    Robust Graphics Booster ...............:Fast 
    CPU Clock Ratio ...........................:8 X
    Fine CPU Clock Ratio.....................:+0.5
    CPU Frequency .............................:3.9GHz (459x8.5)
     
    Advanced Clock Control Press Enter 
    CPU Host Clock Control..................:Enabled
    CPU Host Frequency (Mhz) ............:459 
    PCI Express Frequency (Mhz) ........:100 
    C.I.A.2 .................................:Disabled 
     
    CPU Clock Drive..........................:800mV 
    PCI Express Clock Drive...............:900mV 
    CPU Clock Skew (ps)...................:0ps 
    MCH Clock Skew (ps)...................:0ps 
     
    DRAM Performance Control 
    Performance Enhance...................:Standard
    Extreme Memory Profile (X.M.P.).....:Disabled 
    (G)MCH Frequency Latch...............:400
    System Memory Multiplier ..............2.00D
    Memory Frequency (Mhz) ....1066....:918
    DRAM Timing Selectable ................:Manual 
     
    Standard Timing Control 
    CAS Latency Time.............5........5
    tRCD ...............................7........5
    tRP'..................................7........5
    tRAS...............................24.......15
     
    Advanced Timing Control 
    tRRD.......................4.................4
    tWTR......................4..................4
    tWR.........................8.................8
    tRFC........................68...............68
    tRTP.........................4................4
    Command Rate (CMD) .......0........2
     
    Driving Strength Profiles 
    Driving Strength ........................... 1066 (both)
     
    Channel A 
    Static tRead Value...............8.....: 9
    tRD Phase0 Adjustment.......0.......: Auto
    tRD Phase1 Adjustment.......0.......: Auto
    tRD Phase2 Adjustment ......0.......: Auto
    tRD Phase3 Adjustment.......0.......: Auto
    Trd2rd(Different Rank)...........8....: Auto
    Twr2wr(Different Rank)..........8....: Auto
    Twr2rd(Different Rank)...........7....: Auto
    Trd2wr(Same/Diff Rank).........9.....: Auto
    Dimm1 Clock Skew Control............: Auto
    Dimm2 Clock Skew Control............: Auto
     
    Channel B 
    Static tRead Value...............8........: 9
    tRD Phase0 Adjustment........1.......: Auto 
    tRD Phase1 Adjustment....... 0.......: Auto
    tRD Phase2 Adjustment .......0.......: Auto
    tRD Phase3 Adjustment........0.......: Auto
    Trd2rd(Different Rank).......... .8.....: Auto
    Twr2wr(Different Rank).......... 8....: Auto
    Twr2rd(Different Rank)........... 7....: Auto
    Trd2wr(Same/Diff Rank)..........9.....: Auto
    Dimm1 Clock Skew Control.............: Auto
    Dimm2 Clock Skew Control.............: Auto
     
    Motherboard Voltage Control 
    Voltage Type.………... Manual 
    CPU
    Load Line Calibration......................:Enabled
    CPU Vcore….…….1.25000V...........:1.2625
    CPU Termination…..... 1.200V........:1.22V
    CPU PLL……………….1.500V.......: 1.57V
    CPU Referennce.……...0.760V.......: 0.772
     
    MCH/ICH 
    MCH Core……………...1.100V.........:1.3V
    MCH Reference….…….0.760V.........;0.772 
    MCH/DRAM Ref.…......0.900V..........:1.06 
    ICH I/O…………….....1.500V............:1.50V
    ICH Core…………...…1.100V............:1.200V
     
    DRAM 
    DRAM Voltage ……....1.800V..........:2.120
    DRAM Termination .…0.900V...........:Auto 
    Channel A Reference 0.900V............:Auto
    Channel B Reference 0.900V............:Auto
    Advanced Settings 
    Limit CPUID Max. to 3.....................: Disabled 
    No-Execute Memory Protect.................: Enabled 
    CPU Enhanced Halt (C1E)...................: Disabled 
    C2/C2E State Support......................: Disabled 
    x C4/C4E State Support....................: Disabled 
    CPU Thermal Monitor 2(TM2) ...............: Enabled 
    CPU EIST Function.........................: Disabled 
    Virtualization Technology.................: Disabled
    Last edited by Greyform; 10-04-2009 at 01:00 AM.
    MB Gigabyte EP45-UD3P
    CPU Q9550
    RAM 8 Gigs G-Skil F2-8500CL5 (4 2gig sticks)
    Video Card ATI 4890
    HSF Zalman CNPS9500 AT
    Case Antec Nine Hundred two

  2. #52
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Prime95 won't run at 100%

    If you want to loosen it try 5 6 6 18 and tRFC to 70 static tRead to 10

    DRAM Termination .…0.900V...........:Auto <--1.060v

  3. #53
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Prime95 won't run at 100%

    Greyform I just got around to measuring distance from motherboard to end of V8. It's roughly 6 3/4 - 7 inches. Hope that helps.
    Last edited by Conners; 10-04-2009 at 05:05 AM.

  4. #54
    Join Date
    Sep 2009
    Posts
    32

    Default Re: Prime95 won't run at 100%

    Thanks Conners.

    I can't get prime to run really past 14 minutes and a lot of time not past 7 so I think I will just back down and leave it alone, I doubt I am getting that much more out of it at 3.9 vs 3.8 anyhow.
    MB Gigabyte EP45-UD3P
    CPU Q9550
    RAM 8 Gigs G-Skil F2-8500CL5 (4 2gig sticks)
    Video Card ATI 4890
    HSF Zalman CNPS9500 AT
    Case Antec Nine Hundred two

  5. #55
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: Prime95 won't run at 100%

    IF you don make all the changes then you'll never know. Again accuracy in your settings and the templates you post are not only important, there everything.

    Code:
    Advanced Timing Control 
    tRRD.......................4.................4
    tWTR......................4..................4
    tWR.........................8.................8
    tRFC........................68...............68 <-- 70 to 80
    tRTP.........................4................4
    Command Rate (CMD) .......0........2
     
    Driving Strength Profiles 
    Driving Strength ........................... 1066 (both)
     
    Channel A 
    Static tRead Value...............8.....: 9 <--10
    tRD Phase0 Adjustment.......0.......: Auto
    tRD Phase1 Adjustment.......0.......: Auto
    tRD Phase2 Adjustment ......0.......: Auto
    tRD Phase3 Adjustment.......0.......: Auto
    Trd2rd(Different Rank)...........8....: Auto
    Twr2wr(Different Rank)..........8....: Auto
    Twr2rd(Different Rank)...........7....: Auto
    Trd2wr(Same/Diff Rank).........9.....: Auto
    Dimm1 Clock Skew Control............: Auto
    Dimm2 Clock Skew Control............: Auto
     
    Channel B 
    Static tRead Value...............8........: 9 <--10
    tRD Phase0 Adjustment........1.......: Auto 
    tRD Phase1 Adjustment....... 0.......: Auto
    tRD Phase2 Adjustment .......0.......: Auto
    tRD Phase3 Adjustment........0.......: Auto
    Trd2rd(Different Rank).......... .8.....: Auto
    Twr2wr(Different Rank).......... 8....: Auto
    Twr2rd(Different Rank)........... 7....: Auto
    Trd2wr(Same/Diff Rank)..........9.....: Auto
    Dimm1 Clock Skew Control.............: Auto
    Dimm2 Clock Skew Control.............: Auto
     
    Motherboard Voltage Control 
    Voltage Type.………... Manual 
    CPU
    Load Line Calibration......................: Enabled
    CPU Vcore….…….1.25000V...........: 1.2625 <- raise + one or two
    CPU Termination…..... 1.200V........: 1.22V
    CPU PLL……………….1.500V.......: 1.57V
    CPU Referennce.……...0.760V.......: 0.772v  <--raise + one
     
    MCH/ICH 
    MCH Core……………...1.100V.........:1.300V <-- 1.050 or 1.00
    MCH Reference….…….0.760V.........: 0.772v
    MCH/DRAM Ref.…......0.900V..........: 1.050v 
    ICH I/O…………….....1.500V............: 1.500v
    ICH Core…………...…1.100V............: 1.200V
     
    DRAM 
    DRAM Voltage ……....1.800V..........: 2.100
    DRAM Termination .…0.900V...........: Auto <-- 1.050v

Page 6 of 6 FirstFirst ... 456

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •