Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 7 of 7

Thread: OCing a Q9550 on a GA-EP35C-DS3R




  1. #1
    Join Date
    Sep 2009
    Location
    Cincinnati
    Posts
    31

    Default OCing a Q9550 on a GA-EP35C-DS3R

    Slap the Q9950 on this Board just wondering if anybody had any good setting Oc'ing past 3.7ghz and holding it stable?

  2. #2
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: OCing a Q9550 on a GA-EP35C-DS3R

    I dunno let's see what you got.

    This is Just a template We use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    CPU = Model #
    Motherboard = Model, Revision #
    BIOS Version =
    Ram = Brand, Model#, Part#, And or Link
    
    
    Code:
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450] 
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    
    Performance Enhance = [Standard]
    
    CAS Latency Time________________ 
    Dram RAS# to CAS# Delay_________ 
    Dram RAS# Precharge Delay_______
    Precharge Delay (tRAS)__________ 
    
    ACT to ACT Delay (tRRD)_________ 
    Rank Write to READ Delay________ 
    Write to Precharge Delay_________ 
    Refresh to ACT Delay______________ 
    Read to Precharge Delay__________
    Static tRead Value_______________
    Static tRead Phase Adjust________ [Auto]
    
    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]
    
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [+0.1V] 
    FSB OverVoltage Control___ [+0.1V] 
    (G)MCH OverVoltage Control [+0.1V] 
    CPU Voltage Control_______ [1.25]
    
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB__________________

  3. #3
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: OCing a Q9550 on a GA-EP35C-DS3R

    If you want specific bios suggestions, we need the following:

    1) List your system components in your signature.
    --> User CP tab (upper left corner of web page)
    --> select Edit Signature
    --> enter your hardware components (brand, model, etc.)
    --> include your bios version
    --> preview
    --> Save when complete
    Be sure to include your bios version, motherboard version, power supply, cpu heatsink/fan setup and the model numbers of all components.

    2) Link to your ram's full specifications.

    3) Include a screenshot that displays:
    Memset using the SPD and ">>" tabs
    cpu-z CPU and Mainboard screens (several instances can be run at the same time)
    EasyTune6 --> TUNER tab --> ADVANCE tab --> VOLTAGE tab (only the Voltage tab is needed)

    Links for these programs are in the Latest Overclocking Programs, System Info, Benchmarking, & Stability Tools thread.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  4. #4
    Join Date
    Sep 2009
    Location
    Cincinnati
    Posts
    31

    Default Re: OCing a Q9550 on a GA-EP35C-DS3R

    Quote Originally Posted by Conners View Post
    I dunno let's see what you got.

    This is Just a template We use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    CPU = Model Q9550 EO
    Motherboard = EP35C-DS3R Rev 2.1
    BIOS Version = F4a
    Ram = G.Skill,F2-500CL5D,
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820231144
     
     
    Code:
    Robust Graphics Booster___________ [Fast]
    CPU Clock Ratio ____________ [8] 
    Fine Clock Ratio ____________[0.5]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [436] 
    PCI Express Frequency (Mhz)_______ [auto]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.40]
    DRAM Timing Selectable_______ SPD __ [Manual]
     
    Performance Enhance = [Standard]
     
    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 15
     
    ACT to ACT Delay (tRRD)_________auto 
    Rank Write to READ Delay________ auto 
    Write to Precharge Delay_________ auto 
    Refresh to ACT Delay______________ auto 
    Read to Precharge Delay__________auto 
    Static tRead Value_______________auto 
    Static tRead Phase Adjust________ [Auto]
     
    CPU/PCIEX Clock Driving Control [800mV]
    CPU Clock Skew Control [normal]
    GMCH Clock Skew Control [Normal]
     
    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V] 
    PCI-E OverVoltage Control_ [normal] 
    FSB OverVoltage Control___ [+0.2V] 
    (G)MCH OverVoltage Control [+0.3V] 
    CPU Voltage Control_______ [1.293v]
     
    Limit CPUID Max. to 3.....................: [Enabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Enabled]
    x C4/C4E State Support..................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Enabled] Enabled if you use Vmware/Virtual PC
     
    Integrated Peripherals
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB__________________


    there you go Conners as it looks the P35 and P45 Bio Screens are little different P45 looks like it has alittle more in it as you may known Me and (CincyRob) are friends and live in the same town and use to work together just to let you know this is my backup system until i get the reat of my new parts order for my T-power I45..I just wanna play around with this Old Backup board to see how far..I can get it up to and stable...

    here's how far..I got up to
    http://valid.canardpc.com/show_oc.php?id=744333

    but i believe it won't got no futher on this DS3R board there's a limit for these boards

    LinX Test below


    In motion and after Test IBT Results



    after test



    Gonna run Prime95
    and go to Bed and see what I wake up with.. with Ram dropped to 872mhz
    Last edited by Bigwill68; 10-03-2009 at 11:33 AM. Reason: Results Posted


    switching around cpu below
    Biostar I45 with my (E8400 EO)
    Gigabyte EP45-UD3P Rev 1.6
    With My Q9550 on the Biostar T-Power I45
    Gigabyte EP35C-DS3R Rev 2.1 With the Quad in!

  5. #5
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: OCing a Q9550 on a GA-EP35C-DS3R

    Oh yeah, ya heard of forrestang, leatherneck, or chronic_Buzz up ur way?

  6. #6
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: OCing a Q9550 on a GA-EP35C-DS3R

    I would try one or two notches more vcore and see if it gives higher and more unified LinX/IBT results.
    Did you try to press Ctrl+F1 in main BIOS screen? The screen should flash, then enter MIT and see if there are more options there.

  7. #7
    Join Date
    Sep 2009
    Location
    Cincinnati
    Posts
    31

    Default Re: OCing a Q9550 on a GA-EP35C-DS3R

    Quote Originally Posted by Chike View Post
    Did you try to press Ctrl+F1 in main BIOS screen? The screen should flash, then enter MIT and see if there are more options there.

    Know..I did'nt i'm gonna try that and get back to you and what happens Thanks


    Hey Chike sense you told me to try to press Ctrl+F1 in main BIOS screen this what came up extra afterwords what's this mean my friend never seen this before
    the arrows are pointing to them..

    Last edited by Bigwill68; 10-04-2009 at 12:31 AM. Reason: Bio Screen shot


    switching around cpu below
    Biostar I45 with my (E8400 EO)
    Gigabyte EP45-UD3P Rev 1.6
    With My Q9550 on the Biostar T-Power I45
    Gigabyte EP35C-DS3R Rev 2.1 With the Quad in!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •