Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: EP45-DS3 + G.skill F2-8500CL5D-4GB




  1. #1
    Join Date
    Oct 2009
    Posts
    2

    Default EP45-DS3 + G.skill F2-8500CL5D-4GB

    I have EP45-DS3 run the spec E8400 @3.45 and HIS 4890 1GB, it worked fine with Kingston DDR2 800 6GB(2*2GB and 1*2GB), but when I decided to change the RAM to G.skill G.skill F2-8500CL5D-4GB, It become a problem...

    I can't make it work with 2 sticks of ram, if I installed only 1stick at The Red slot at most far out of the CPU(the forth slot), I work and show at 5-5-5-15 8500, but not at all for 2 sticks... then I tried to switch to another slot(by only 1stick), it doesn't work also... Doesn't show even the bios and keep rebooting...

    My problem now is, I can only install 1 stick of ram(G.skill) at the red slot on the far out of cpu(the slot 4), can't install 2 sticks and change the slot..It doesn't boot,doesn't show the bios screen but keep rebooting...

    I did try to adjust to MCH to 1.24 and DRAM to 2.1, but it didn't help...
    Anyone can guide me to fix the problem, Please...

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-DS3 + G.skill F2-8500CL5D-4GB

    Does the one stick you have used in slot 4 work in any other slot?
    Does the other stick work in slot 4 too?
    Try lower MCH in the range of 1.05-0.95v (try each of the options).

  3. #3
    Join Date
    Oct 2009
    Posts
    2

    Default Re: EP45-DS3 + G.skill F2-8500CL5D-4GB

    Quote Originally Posted by Chike View Post
    Does the one stick you have used in slot 4 work in any other slot?
    Does the other stick work in slot 4 too?
    Try lower MCH in the range of 1.05-0.95v (try each of the options).
    Thank you but, I did try.. nothing good at all... but this pair of ram work with another MOBO...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •