Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Windows 7 JBOD problem




  1. #11
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Windows 7 JBOD problem

    So you set it to AHCI and you have no hard drives showing?
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  2. #12
    Join Date
    Dec 2009
    Location
    Australia
    Posts
    7

    Default Re: Windows 7 JBOD problem

    I believe the setting was "Configure sata as" It was IDE and i changed it to AHCI. Now my Internal sata drive shows, as well as my internal IDE drive, however my external esata drive isn't found. (Before the 1st of the 4 drives in the enclosure was detected.)

    Sorry i just realised i didn't save on exit. When i change Configure sata as to AHCI instead of IDE Windows blue screens during startup and instantly restarts.
    Last edited by Lucasmcl; 01-02-2010 at 01:42 AM.

  3. #13
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Windows 7 JBOD problem

    I am sorry I am not familiar with the bios settings on an ASUS motherboard. You may need to set the SATA type as ide until you can get the bios settings figured out.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  4. #14
    Join Date
    Dec 2009
    Location
    Australia
    Posts
    7

    Default Re: Windows 7 JBOD problem

    Ok thanks for the help anyway.

    If anyone else has any ideas or suggestions i would greatly appreciate it.

    I will post the solution if i find one.

  5. #15
    Join Date
    Dec 2009
    Location
    Australia
    Posts
    7

    Default Re: Windows 7 JBOD problem

    PROBLEM SOLVED!!!

    I installed the drivers under chipset and SATA on the Asus website but didn't check drivers under 'other'. Installing JMicron drivers fixed the problem.

    Thanks to everyone who helped or at least tried.

  6. #16
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Windows 7 JBOD problem

    Oh so it was plugged up on another SATA controller, and just needed the SATA controller drivers installed in Windows 7. I guess Windows 7 recognized the first SATA controller but missed the second one. I hope this information will be usefull to others. Good job Lucasmci.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  7. #17
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: Windows 7 JBOD problem

    i told you you need to install driver

  8. #18
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Windows 7 JBOD problem

    i told you you need to install driver
    You also suggested it may not be compatible with Windows 7. Good first call though.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •