Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: Ga-ep45-ud3l help




  1. #11
    Join Date
    May 2009
    Posts
    32

    Default Re: Ga-ep45-ud3l help

    Thks for reply I trioed your suggestions with 312 fsb 3.20b strap ram 1000 either it gave me errors or a blue screen with other 2 strappings u mentioned . So now I have this Strap c 200 running ram at 1000 , 300fsb with a multiplier at 11.5. My ram voltage is at 2.10. So far so good but need to test more with OCCT .
    Last edited by pomwowpow; 10-10-2009 at 08:27 AM.
    Gigabyte GA-EP45-UD3L Bios F4
    Intel E5200 CPU with Stock Cooler

    G-Skill F2-8000CL5D-4GBPQ DDR2-1000 Pc2-8000
    2048x2 CL5-5-5-15 2.0-2.1v

    Creative Audigy 2 Platinum (SB0240) Sound Card
    BFG NVIDIA GeForce 7300 GT (512 MB)
    SAMSUNG HD501LJ ATA Device (500 GB, 7200 RPM, SATA-II)
    Cooler Master 400 Watt PSU

  2. #12
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ga-ep45-ud3l help

    Note that the timings are not 5-5-5-15 but 5-7-7-19, I believe XMP is disabled, try to set it to profile1 or auto and see how it work. I can't see what tRFC is for the EPP profile, is it 64 or 84? In MemSet main window it's 64, if set too low it may be a problem.
    Did you try the 312FSB with CPU Ratio less than 11?
    Static tRead Value(tRD, Performance Level in MemSet) is currently 10, lower values result in better performance.
    What are the steps options for CPU Termnation?

  3. #13
    Join Date
    May 2009
    Posts
    32

    Default Re: Ga-ep45-ud3l help

    Thks for reply sorry for the bad image xmp is disabled -set xmp to auto u mean? The tRFC is at 64. I did try 312fsb with disasterous results - blue screen , errors , black screen.Less than 11 I did not try though.trd is at 10 what can I do to improve that?
    I still have to test with OCCT and Prime95 further.CPU termination is at 1.20 and can change further no problem. Thks again
    Gigabyte GA-EP45-UD3L Bios F4
    Intel E5200 CPU with Stock Cooler

    G-Skill F2-8000CL5D-4GBPQ DDR2-1000 Pc2-8000
    2048x2 CL5-5-5-15 2.0-2.1v

    Creative Audigy 2 Platinum (SB0240) Sound Card
    BFG NVIDIA GeForce 7300 GT (512 MB)
    SAMSUNG HD501LJ ATA Device (500 GB, 7200 RPM, SATA-II)
    Cooler Master 400 Watt PSU

  4. #14
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ga-ep45-ud3l help

    Yes, set XMP to profile1, this should set correct timings for DDR-1000 automaticaly.
    Save images in PNG format and use image sharing service like TinyPic if they are too big to attach, they also provide a frum link. See this post on how to create a screen capture, Windows' Pain can be used if you don't have IrfanView.
    For the EPP#1 profile in MemSet spd window tRFC is 64?
    Lower tRD result in better memory performance, usually the value that lets you boot would run OK, you should be able to use 7 or less.

  5. #15
    Join Date
    May 2009
    Posts
    32

    Default Re: Ga-ep45-ud3l help

    Thks for reply Here are all stats from bios , pls tell me if you see anything I can change to get better performance.Right now with these settings I am stable.Thks


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: fast
    CPU Clock Ratio ..........................: 11
    Fine CPU Clock Ratio.....................:0.5
    CPU Frequency ...........................: 3.45


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: enabled
    CPU Host Frequency (Mhz) ............:300
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:disabled

    Advanced Clock Control
    CPU Clock Drive...........................:800mv
    PCI Express Clock Drive.................:800mv
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................:0

    DRAM Performance Control
    Performance Enhance...................:standard
    Extreme Memory Profile (X.M.P.).....:disabled
    (G)MCH Frequency Latch...............:200mhz
    System Memory Multiplier ..............: 3.33c
    Memory Frequency (Mhz) ..............: 1000
    DRAM Timing Selectable ................:manual

    Standard Timing Control
    CAS Latency Time........................:5
    tRCD .........................................:5
    tRP'...........................................:5
    tRAS..........................................:15

    Advanced Timing Control
    tRRD...........................................:3 auto
    tWTR..........................................:3 auto
    tWR............................................:6 auto
    tRFC...........................................:64 manual
    tRTP...........................................:3 auto
    Command Rate (CMD) ....................:0 auto

    Driving Strength Profiles
    Driving Strength ............................:0c-1333

    Channel A
    Static tRead Value.........................:4 auto
    tRD Phase0 Adjustment...................: 0 "
    tRD Phase1 Adjustment...................:0 "
    tRD Phase2 Adjustment .................:0 "
    tRD Phase3 Adjustment..................:0 "
    Trd2rd(Different Rank)....................: 8 "
    Twr2wr(Different Rank)...................: 8 "
    Twr2rd(Different Rank)...................: 7 "
    Trd2wr(Same/Diff Rank)..................: 9 "
    Dimm1 Clock Skew Control...............:auto
    Dimm2 Clock Skew Control...............:auto

    Channel B
    Static tRead Value.........................:4 auto
    tRD Phase0 Adjustment...................: 0 "
    tRD Phase1 Adjustment...................:0 "
    tRD Phase2 Adjustment .................:0 "
    tRD Phase3 Adjustment..................:0 "
    Trd2rd(Different Rank)....................: 8 "
    Twr2wr(Different Rank)...................: 8 "
    Twr2rd(Different Rank)...................: 7 "
    Trd2wr(Same/Diff Rank)..................: 9 "
    Dimm1 Clock Skew Control...............:auto
    Dimm2 Clock Skew Control...............:auto

    Motherboard Voltage Control
    Voltage Type.………... Manual
    Load Line Calibration..........Enabled
    CPU Vcore….……….........................:1.3325
    CPU Termination…..... 1.200V*.......:1.200
    CPU PLL…………………....1.500V*.......:1.500
    CPU Referen.…………....0.805V*.......: auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.200
    MCH Reference….…….0.760V...........:auto
    ICH I/O……………….....1.550V............:1.550
    ICH Core…………...……1.100V............:1.100

    DRAM
    DRAM Voltage ……....1.800V............: 2.100




    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]
    Gigabyte GA-EP45-UD3L Bios F4
    Intel E5200 CPU with Stock Cooler

    G-Skill F2-8000CL5D-4GBPQ DDR2-1000 Pc2-8000
    2048x2 CL5-5-5-15 2.0-2.1v

    Creative Audigy 2 Platinum (SB0240) Sound Card
    BFG NVIDIA GeForce 7300 GT (512 MB)
    SAMSUNG HD501LJ ATA Device (500 GB, 7200 RPM, SATA-II)
    Cooler Master 400 Watt PSU

  6. #16
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ga-ep45-ud3l help

    First make a memory benchmark for future comparison, MaxxMEM² - PreView would do, or Everest memory & cache benchmarks.
    Static tRead is on auto, check for actual valu in MemSet(Performance Level) and try to set it lower, one step at a time, until the computer won't boot, than set it one step up.
    Run a few memtest86+ passes before booting into windows.
    Have you ran any stability tests and of what kind?

  7. #17
    Join Date
    May 2009
    Posts
    32

    Default Re: Ga-ep45-ud3l help

    OK Thks for reply Static tRead so far is stable at 7. I have run OCCT tests for a few hours and also a memtest.I will do a Prime95 today and also the memtest86 test you suggested.I have run a few bench mark tests from Everest also.Thks
    Gigabyte GA-EP45-UD3L Bios F4
    Intel E5200 CPU with Stock Cooler

    G-Skill F2-8000CL5D-4GBPQ DDR2-1000 Pc2-8000
    2048x2 CL5-5-5-15 2.0-2.1v

    Creative Audigy 2 Platinum (SB0240) Sound Card
    BFG NVIDIA GeForce 7300 GT (512 MB)
    SAMSUNG HD501LJ ATA Device (500 GB, 7200 RPM, SATA-II)
    Cooler Master 400 Watt PSU

  8. #18
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ga-ep45-ud3l help

    What temps you get under OCCT and Prime95 load?

  9. #19
    Join Date
    May 2009
    Posts
    32

    Default Re: Ga-ep45-ud3l help

    Here is a screen of OCCt results.Cpu2 gives same results.
    Gigabyte GA-EP45-UD3L Bios F4
    Intel E5200 CPU with Stock Cooler

    G-Skill F2-8000CL5D-4GBPQ DDR2-1000 Pc2-8000
    2048x2 CL5-5-5-15 2.0-2.1v

    Creative Audigy 2 Platinum (SB0240) Sound Card
    BFG NVIDIA GeForce 7300 GT (512 MB)
    SAMSUNG HD501LJ ATA Device (500 GB, 7200 RPM, SATA-II)
    Cooler Master 400 Watt PSU

  10. #20
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ga-ep45-ud3l help

    Not bad at all for stock cooler.

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •