Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: OCZ 2G10662G on EP45-UD3R




  1. #11
    Join Date
    Sep 2009
    Location
    Cincinnati
    Posts
    31

    Default Re: OCZ 2G10662G on EP45-UD3R

    Quote Originally Posted by Gerardz View Post
    i have posted an image of my cpu z if u scroll up, and how do i change my voltage to .3v? where in my bios is it?

    under MIT screen mb intelligent tweaker should look like this down by your
    voltage settings but first change the System Memory Multiplier (SPD) to [2.40] and the DRAM Timing Selectable to[Manual]



    System Voltage Control____ [Autol] change to Manual
    DDR2 OverVoltage Control__ [Auto] +0.300V
    PCI-E OverVoltage Control_ [Auto]
    FSB OverVoltage Control___ [Auto]
    (G)MCH OverVoltage Control [Auto]
    CPU Voltage Control_______ [Auto]


    switching around cpu below
    Biostar I45 with my (E8400 EO)
    Gigabyte EP45-UD3P Rev 1.6
    With My Q9550 on the Biostar T-Power I45
    Gigabyte EP35C-DS3R Rev 2.1 With the Quad in!

  2. #12
    Join Date
    Dec 2008
    Posts
    48

    Default Re: OCZ 2G10662G on EP45-UD3R

    OK thank you for the quick replies. I have it reading on CPUz at 533.3 MHz now. I am not familiar with most of these things yet, so can you please explain if you can of course, how I would go about setting my VDIMM to the max?

  3. #13
    Join Date
    Sep 2009
    Location
    Cincinnati
    Posts
    31

    Default Re: OCZ 2G10662G on EP45-UD3R

    Quote Originally Posted by Gerardz View Post
    OK thank you for the quick replies. I have it reading on CPUz at 533.3 MHz now. I am not familiar with most of these things yet, so can you please explain if you can of course, how I would go about setting my VDIMM to the max?

    Have you bumped up your volts to (+0.300V) yet? seems to me your volts are on auto still as the Snap shot you took IC 1.90v go in the bio's and bump the voltage up to run 2.1v and take another snagit
    shot


    and another thing This is Just a template We use to ask people their settings, pay no attention to the numbers in it, replace with yours



    Code:
    CPU = Model #
    
    Motherboard = Model, Revision #
    
    BIOS Version =
    
    Ram = Brand, Model#, Part#, And or Link
    
     
    
     
    
    Code:
    
    Robust Graphics Booster___________ [Auto]
    
    CPU Clock Ratio ____________ [8] 
    
    Fine Clock Ratio ____________[0.5]
    
    CPU Host Clock Control_ [Enabled]
    
    CPU Host Frequency (MHz)__________ [450] 
    
    PCI Express Frequency (Mhz)_______ [100]
    
    C.I.A. 2__________________________ [Disabled]
    
    System Memory Multiplier (SPD)____ [2.00]
    
    DRAM Timing Selectable_______ SPD __ [Manual]
    
     
    
    Performance Enhance = [Standard]
    
     
    
    CAS Latency Time________________ 
    
    Dram RAS# to CAS# Delay_________ 
    
    Dram RAS# Precharge Delay_______
    
    Precharge Delay (tRAS)__________ 
    
     
    
    ACT to ACT Delay (tRRD)_________ 
    
    Rank Write to READ Delay________ 
    
    Write to Precharge Delay_________ 
    
    Refresh to ACT Delay______________ 
    
    Read to Precharge Delay__________
    
    Static tRead Value_______________
    
    Static tRead Phase Adjust________ [Auto]
    
     
    
    CPU/PCIEX Clock Driving Control [800mV]
    
    CPU Clock Skew Control [normal]
    
    GMCH Clock Skew Control [Normal]
    
     
    
    System Voltage Control____ [Manual]
    
    DDR2 OverVoltage Control__ [+0.300V] 
    
    PCI-E OverVoltage Control_ [+0.1V] 
    
    FSB OverVoltage Control___ [+0.1V] 
    
    (G)MCH OverVoltage Control [+0.1V] 
    
    CPU Voltage Control_______ [1.25]
    
     
    
    Limit CPUID Max. to 3.....................: [Disabled]
    
    No-Execute Memory Protect............: [Enabled]
    
    CPU Enhanced Halt (C1E)................: [Disabled]
    
    C2/C2E State Support....................: [Disabled]
    
    x C4/C4E State Support..................: [Disabled]
    
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    
    CPU EIST Function.........................: [Disabled]
    
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
     
    
    Integrated Peripherals
    
    Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB__________________
    [/QUOTE]
    Last edited by Bigwill68; 10-10-2009 at 10:51 AM. Reason: template


    switching around cpu below
    Biostar I45 with my (E8400 EO)
    Gigabyte EP45-UD3P Rev 1.6
    With My Q9550 on the Biostar T-Power I45
    Gigabyte EP35C-DS3R Rev 2.1 With the Quad in!

  4. #14
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: OCZ 2G10662G on EP45-UD3R

    Quote Originally Posted by Gerardz View Post
    how I would go about setting my VDIMM to the max?
    vDIMM is DRAM Voltage in MIT, set to the spec value for your RAM, check in BIOS HWMonitor for the actual applied value after saving the changes.

  5. #15
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: OCZ 2G10662G on EP45-UD3R

    On a UD3R, the MIT layout is different. There is no Overvoltage mentioned, you enter voltages as their actual values. For example, if the RAM needs 2.1V, then 2.1V is entered/scrolled up to with Pg Up/Down

    The template for a UD3 P45 board is as follows:

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Fast
    CPU Clock Ratio ..........................: 8
    Fine CPU Clock Ratio.....................:  0.5
    CPU Frequency ...........................: 4.16 MHz
     
     
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 490 Mhz
    PCI Express Frequency (Mhz) .........: 100
    C.I.A.2 .................................:[Disabled]
     
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV
    PCI Express Clock Drive.................: 900mV
    CPU Clock Skew (ps)....................: 0ps 
    MCH Clock Skew (ps)...................: 0ps 
     
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 980
    DRAM Timing Selectable ................: [Manual]
     
    Standard Timing Control
    CAS Latency Time........................ 5
    tRCD ......................................... 5
    tRP'........................................... 5
    tRAS.......................................... 15
     
    Advanced Timing Control
    tRRD........................................... 4
    tWTR.......................................... 4
    tWR............................................ 8
    tRFC........................................... 68
    tRTP........................................... 4
    Command Rate (CMD) ....................: 2
     
    Driving Strength Profiles
    Driving Strength ............................Auto
     
    Channel A
    Static tRead Value.........................: 9
     tRD Phase0 Adjustment...................:Auto 
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Channel B
    Static tRead Value.........................: 9
     tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.38125V
    CPU Termination…..... 1.200V*.......: 1.360V
    CPU PLL…………………....1.500V*.......: 1.590V
    CPU Referen.…………....0.755V*.......: .901V
     
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.380V
    MCH Reference….…….0.800V...........: .901V
    MCH/DRAM Ref.…......0.900V...........: 1.120V
    ICH I/O……………….....1.500V............: 1.500V
    ICH Core…………...……1.100V............: 1.100V
     
    DRAM
    DRAM Voltage ……....1.800V............: 2.120V
    DRAM Termination .…0.900V............: 1.010V
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto
     
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] 
     
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled]
    You can ignore any settings in this template and replace them with your own. DDR3 UDŁ boards are the same, except DDR3 is refered to by name in relevant sections.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  6. #16
    Join Date
    Dec 2008
    Posts
    48

    Default Re: OCZ 2G10662G on EP45-UD3R



    got it set to 2.10v. Thanks for the help guys.

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •