Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: OCZ 2G10662G on EP45-UD3R




  1. #1
    Join Date
    Dec 2008
    Posts
    48

    Default OCZ 2G10662G on EP45-UD3R

    Hello, first time here just need some directions.

    I updated to BIOS F11.

    I ran EasyTune 6 and it is saying my memory's max bandwidth is reading PC-6400 (400MHz). I have 4 sticks of OCZ 2G10662G PC 8500 (1066Mhz) i want to know how i can achieve the posted speed.

    Running 64 bit Vista with Intel CORE 2 Quad Q6600. I have no plans on overclocking, I just want my ram running at its fastest speed.

  2. #2
    Join Date
    Sep 2009
    Location
    Cincinnati
    Posts
    31

    Default Re: OCZ 2G10662G on EP45-UD3R

    Quote Originally Posted by Gerardz View Post
    Hello, first time here just need some directions.

    I updated to BIOS F11.

    I ran EasyTune 6 and it is saying my memory's max bandwidth is reading PC-6400 (400MHz). I have 4 sticks of OCZ 2G10662G PC 8500 (1066Mhz) i want to know how i can achieve the posted speed.

    Running 64 bit Vista with Intel CORE 2 Quad Q6600. I have no plans on overclocking, I just want my ram running at its fastest speed.

    as it seems my friend you would have to go into the bio's change your memory timing from auto to manual and set your timing to the factory specs and may also your memory Voltage all 800mhz and 1066mhz read PC-6400 and it should have been (800MHz) on auto but anyway you gou gotta change it manually...Post a Link from Newegg what type of memory you actually have

    Thanks


    switching around cpu below
    Biostar I45 with my (E8400 EO)
    Gigabyte EP45-UD3P Rev 1.6
    With My Q9550 on the Biostar T-Power I45
    Gigabyte EP35C-DS3R Rev 2.1 With the Quad in!

  3. #3
    Join Date
    Dec 2008
    Posts
    48

    Default Re: OCZ 2G10662G on EP45-UD3R

    Last edited by Gerardz; 10-10-2009 at 09:46 AM.

  4. #4
    Join Date
    Dec 2008
    Posts
    48

    Default Re: OCZ 2G10662G on EP45-UD3R

    If you are able to guide me to the right settings it would be much more helpful if you can talk to me via Instant messaging such as AIM, my username is xgerardz if you are able to do that.

  5. #5
    Join Date
    Dec 2008
    Posts
    48

    Default Re: OCZ 2G10662G on EP45-UD3R

    used CPUz and this is what is giving me

  6. #6
    Join Date
    Sep 2009
    Location
    Cincinnati
    Posts
    31

    Default Re: OCZ 2G10662G on EP45-UD3R


    ok seems to me this memory runs at (Timing-5-6-6-18) with volts 2.1v have you got cpu-z installed? if not download 64 bit one sense your running Vista..I wanna know what your memory timming is on auto
    CPUID

    but if you do got cpu-z installed go into the bio's change your timing to
    (5-6-6-18) bump up your volts 0.3v that will put you at 2.1v factory specs remember change your systrm timing from (Auto) to (Manual) to change your timing and your system voltage control from normal to manual
    to make your voltage change...


    Example Mine


    My Timing



    My Voltage on everest
    Last edited by Bigwill68; 10-10-2009 at 10:17 AM. Reason: Example Showing


    switching around cpu below
    Biostar I45 with my (E8400 EO)
    Gigabyte EP45-UD3P Rev 1.6
    With My Q9550 on the Biostar T-Power I45
    Gigabyte EP35C-DS3R Rev 2.1 With the Quad in!

  7. #7
    Join Date
    Dec 2008
    Posts
    48

    Default Re: OCZ 2G10662G on EP45-UD3R

    i have posted an image of my cpu z if u scroll up, and how do i change my voltage to .3v? where in my bios is it?

  8. #8
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: OCZ 2G10662G on EP45-UD3R

    Don't change anything just yet. look on the Memory tab to see what speed your RAM's running at. Virtually all 1066 will state a max bandwidth of PC2-6400 on the SPD tab, it doesn't mean it's actually running at only DDR 800. 99.99% of DDR-1066 IS DDR-800 RAM, just speed binned and SPD programmed for 1066.

    Here is my CPU-Z detected settings. You can clearly see that the RAM has a so called "Maximum Bandwidth" of DDR-800, but is running as desired, at DDR-1093. :

    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  9. #9
    Join Date
    Dec 2008
    Posts
    48

    Default Re: OCZ 2G10662G on EP45-UD3R


    Last edited by Gerardz; 10-10-2009 at 10:29 AM.

  10. #10
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: OCZ 2G10662G on EP45-UD3R

    Now you've posted the correct CPU-Z tab, you are correct, your RAM is running at DDR-800.

    Go into the BIOS, set your primary timings manually to the RAM's specification, as well as setting VDIMM to the max stated by OCZ. Now set (G)MCH Latch to auto and Scroll throiugh System Memory Multiplier settings until you reach 4.0A. Check that the stated speed your RAM will run at is now showing on this page as 1066 and you're all set.

    Note that with 8GB of RAM, you may need more VDIMM than spec, and/or a higher than normal MCH Core voltage (1.2V-1.38V, depends on individual components). You may also find it utterly impossible to get 8GB stable at 1066, many have tried and failed, it's pretty common.

    You may also need to tweak tRead and tRFC manually to a value higher than normally needed due to the extra RAM.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •