Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 6 FirstFirst 1234 ... LastLast
Results 11 to 20 of 59

Thread: EP45-UD3P Q6600@3.2 S3 mode reboot loops




  1. #11
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3P Q6600@3.2 S3 mode reboot loops

    Are those CPU or core temps?
    An overnight 8+ hours Prime95 or Orthos blend toture test will help verify the settings are stable. If it fail it's important which FFT size was that caused the failure.
    IntelBurnTest is also a good test that help indicate if there's enough vcore, but produce much higher temperatures than Prime95 or Orthos.

  2. #12
    Join Date
    Oct 2009
    Posts
    25

    Default Re: EP45-UD3P Q6600@3.2 S3 mode reboot loops

    Quote Originally Posted by Chike View Post
    Are those CPU or core temps?
    An overnight 8+ hours Prime95 or Orthos blend toture test will help verify the settings are stable. If it fail it's important which FFT size was that caused the failure.
    IntelBurnTest is also a good test that help indicate if there's enough vcore, but produce much higher temperatures than Prime95 or Orthos.

    Not sure what you mean by cpu or core? I get my temps from a "Core Temp" which displays the temp for each core. Idle is between 32-37
    and when I ran prime95 about 9 months ago I saw the temps go from that to 55 to 57 maybe hit 59 as a high don't remember exactly. Should I just run prime95 tonight for 8hrs? any particular settings?
    GA Ep45-UD3P Bios F9
    Q6600 rev.GO 2.4 @ 3.2Mhz
    Corsair PSU-CMPSU-650TX
    PC2-6400 Corsair -CM2x2048-6400C5 http://www.corsair.com/_datasheets/CM2X2048-6400C5.pdf[
    PC2-6400 OCZ-OCZ2VU8002G
    http://www.ocztechnology.com/product...module_4gb_kit
    ATI Radeon HD 4670
    Cooler- XIGMATEK HDT-S1283 120mm Rifle CPU

  3. #13
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3P Q6600@3.2 S3 mode reboot loops

    CoreTemp as it's name shows core temps, ET6 shows "CPU" temps which are measured at different location on the CPU and different kind of sensor, differences are 5-10 c between core and CPU temps.
    Prime95 or Orthos blend would be good for a start. It's the same test but Orthos halts all threads if one fail.
    Small FFT (<=64k) failure may indicate need to adjust CPU settings and large (>=128k) memory/memory related settings.

  4. #14
    Join Date
    Oct 2009
    Posts
    25

    Default Re: EP45-UD3P Q6600@3.2 S3 mode reboot loops

    Quote Originally Posted by Chike View Post
    CoreTemp as it's name shows core temps, ET6 shows "CPU" temps which are measured at different location on the CPU and different kind of sensor, differences are 5-10 c between core and CPU temps.
    Prime95 or Orthos blend would be good for a start. It's the same test but Orthos halts all threads if one fail.
    Small FFT (<=64k) failure may indicate need to adjust CPU settings and large (>=128k) memory/memory related settings.

    Got ya.. Can I start test now while working on PC browsing or should I just leave it alone while test is going on?
    GA Ep45-UD3P Bios F9
    Q6600 rev.GO 2.4 @ 3.2Mhz
    Corsair PSU-CMPSU-650TX
    PC2-6400 Corsair -CM2x2048-6400C5 http://www.corsair.com/_datasheets/CM2X2048-6400C5.pdf[
    PC2-6400 OCZ-OCZ2VU8002G
    http://www.ocztechnology.com/product...module_4gb_kit
    ATI Radeon HD 4670
    Cooler- XIGMATEK HDT-S1283 120mm Rifle CPU

  5. #15
    Join Date
    Oct 2009
    Posts
    25

    Default Re: EP45-UD3P Q6600@3.2 S3 mode reboot loops

    Priority setting? Also, should "Additional notification" be check?

    Thanks again for your help..
    GA Ep45-UD3P Bios F9
    Q6600 rev.GO 2.4 @ 3.2Mhz
    Corsair PSU-CMPSU-650TX
    PC2-6400 Corsair -CM2x2048-6400C5 http://www.corsair.com/_datasheets/CM2X2048-6400C5.pdf[
    PC2-6400 OCZ-OCZ2VU8002G
    http://www.ocztechnology.com/product...module_4gb_kit
    ATI Radeon HD 4670
    Cooler- XIGMATEK HDT-S1283 120mm Rifle CPU

  6. #16
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3P Q6600@3.2 S3 mode reboot loops

    Quote Originally Posted by Gixxer1kr View Post
    Got ya.. Can I start test now while working on PC browsing or should I just leave it alone while test is going on?
    Should not be a problem with Prime95 or Orthos if it's running in low priority you won't even notice they are running. The test may not run in synch but it's not a problem.
    The longer it runs more likely it'll find a problem if there is any so leave it running overnight.

  7. #17
    Join Date
    Oct 2009
    Posts
    25

    Default Re: EP45-UD3P Q6600@3.2 S3 mode reboot loops

    I ran the test for 10hr 43min, temps went up to about 55 and I got no errors.
    GA Ep45-UD3P Bios F9
    Q6600 rev.GO 2.4 @ 3.2Mhz
    Corsair PSU-CMPSU-650TX
    PC2-6400 Corsair -CM2x2048-6400C5 http://www.corsair.com/_datasheets/CM2X2048-6400C5.pdf[
    PC2-6400 OCZ-OCZ2VU8002G
    http://www.ocztechnology.com/product...module_4gb_kit
    ATI Radeon HD 4670
    Cooler- XIGMATEK HDT-S1283 120mm Rifle CPU

  8. #18
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3P Q6600@3.2 S3 mode reboot loops

    I guess it can be considered stable, but stable for you means also waking from S3, any change with that?
    Try to run IntelBurnTest with max stress level. Note IBT temps are much higher than prime so keep an eye on them while ir's running, if they go over 75c cancel the test.
    Run the test after the computer is at least 5 minutes idle, and less as possible programs running. Check the output results to log, it saves logs in IBT directory. If IBT doesn't fail and results are all close to each other than CPU voltage settings are good.

  9. #19
    Join Date
    Oct 2009
    Posts
    25

    Default Re: EP45-UD3P Q6600@3.2 S3 mode reboot loops

    I ran the test and it passed without errors, my temps went as high as 66.

    IntelBurnTest v2.3
    Created by AgentGOD
    ----------------------------
    Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
    Clock Speed: 3.60 GHz
    Active Physical Cores: 4
    Total System Memory: 8190 MB
    Stress Level: Maximum (6722 MB)
    Testing started on 10/13/2009 3:52:47 PM
    Time (s) Speed (GFlops) Result
    [16:00:12] 389.842 42.2448 3.644857e-002
    [16:07:34] 389.851 42.2438 3.644857e-002
    [16:14:54] 387.043 42.5503 3.644857e-002
    [16:22:16] 390.134 42.2132 3.644857e-002
    [16:29:38] 389.482 42.2838 3.644857e-002
    Testing ended on 10/13/2009 4:29:39 PM
    Test Result: Success.
    GA Ep45-UD3P Bios F9
    Q6600 rev.GO 2.4 @ 3.2Mhz
    Corsair PSU-CMPSU-650TX
    PC2-6400 Corsair -CM2x2048-6400C5 http://www.corsair.com/_datasheets/CM2X2048-6400C5.pdf[
    PC2-6400 OCZ-OCZ2VU8002G
    http://www.ocztechnology.com/product...module_4gb_kit
    ATI Radeon HD 4670
    Cooler- XIGMATEK HDT-S1283 120mm Rifle CPU

  10. #20
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45-UD3P Q6600@3.2 S3 mode reboot loops

    Temps are good, 66c for IBT are not a problem.
    I am tempted to say they look good, but there's too much difference between them for my taste.
    Try using EasyTune to find out if you make them a bit better. In EasyTune Tuner --> Advanced --> Voltage tab, click vcore right triangle to increase it one step up at a time, then the round set button at the bottom, and run the test, untill results look good. No need to use max stress, but at least 3072MB for the quad. If results improved, reboot set target vcore in BIOS, nd verify with max stress.

    For example my IBT results for 3.8GHz, there's less than 0.01GFlops difference between high and low results:
    Code:
    ----------------------------
    IntelBurnTest v2.3
    Created by AgentGOD
    ----------------------------
    
    Processor: Intel(R) Core(TM)2 Duo CPU     E7200  @ 2.53GHz
    Clock Speed: 3.80 GHz
    Active Physical Cores: 2
    Total System Memory: 2046 MB
    
    Stress Level: Custom (1624 MB)
    Testing started on 10/12/2009 2:58:10 AM
    Time (s)		Speed (GFlops)		Result
    [02:59:34] 74.009	24.8823			3.392416e-002
    [03:00:57] 74.032	24.8744			3.392416e-002
    [03:02:20] 74.037	24.8729			3.392416e-002
    [03:03:44] 74.027	24.8761			3.392416e-002
    [03:05:07] 74.008	24.8824			3.392416e-002
    [03:06:30] 74.017	24.8795			3.392416e-002
    [03:07:53] 74.019	24.8788			3.392416e-002
    [03:09:16] 74.026	24.8767			3.392416e-002
    [03:10:40] 74.029	24.8757			3.392416e-002
    [03:12:03] 74.018	24.8792			3.392416e-002
    Testing ended on 10/12/2009 3:12:03 AM
    Test Result: Success.
    ----------------------------
    Have you tried to wake the computer from S3 yet?

Page 2 of 6 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •