Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: HELP! S3 cannot wake from sleep




  1. #1
    Join Date
    Sep 2009
    Posts
    27

    Default HELP! S3 cannot wake from sleep

    GA-Ep45-ud3p
    G.SKill memory
    CPU E7400
    tried all bios versions.
    tried OC and stock.

    my machine cannot wake from standby S3 or S1. I have tried many things and cannot get it to work.

    two common erros are below.

    Please help!

    The platform firmware has corrupted memory across the previous system power
    transition. Please check for updated firmware for your system.

    The system has rebooted without cleanly shutting down first. This error
    could be caused if the system stopped responding, crashed, or lost power
    unexpectedly.

    Please help.
    The system has rebooted without cleanly shutting down first. This error
    could be caused if the system stopped responding, crashed, or lost power
    unexpectedly.

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: HELP! S3 cannot wake from sleep

    What have you tried so far?

    Please fill your forum sugnature with your system specs including a link to ram specs(manufacturer site prefered), board rev. BIOS vers. etc.

    Post your current BIOS settings using the template in this post or the one below it, and we will try to advise.

    A screen capture of MemSet main and spd(click spd) windows would also be helpful.
    MemSet and other programs may be found in http://forums.tweaktown.com/f69/late...30/#post284762

  3. #3
    Join Date
    Sep 2009
    Posts
    27

    Default Re: HELP! S3 cannot wake from sleep

    n/a
    Last edited by Mkedda; 10-15-2009 at 05:53 AM. Reason: n/a

  4. #4
    Join Date
    Sep 2009
    Posts
    27

    Default Re: HELP! S3 cannot wake from sleep

    n/a
    Last edited by Mkedda; 10-15-2009 at 05:53 AM. Reason: n/a

  5. #5
    Join Date
    Sep 2009
    Posts
    27

    Default Re: HELP! S3 cannot wake from sleep

    n/a
    Last edited by Mkedda; 10-15-2009 at 05:53 AM. Reason: n/a

  6. #6
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: HELP! S3 cannot wake from sleep

    Is there a particular reason you are using 2.66C multiplier and not 2.66D?
    In the template Static tRead Value is 8, but MemSet shows 6(Performance Level,) is it on auto? This indeed the lowest I've seen so far with 400FSB, but it may cause problems as well.
    Also is there a specific reason for the reference voltages to be set manually?

  7. #7
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: HELP! S3 cannot wake from sleep

    Looking at it again i see MemSet screen capture was taken with 266 not 400 FSB.

  8. #8
    Join Date
    Sep 2009
    Posts
    27

    Default Re: HELP! S3 cannot wake from sleep

    n/a
    Last edited by Mkedda; 10-15-2009 at 05:53 AM. Reason: n/a

  9. #9
    Join Date
    Sep 2009
    Posts
    27

    Default Re: HELP! S3 cannot wake from sleep

    something changed. i believe someone else was tweaking settings over night. standby problems have occurred through all oc's.
    restoring my settings and resposting soon

  10. #10
    Join Date
    Sep 2009
    Posts
    27

    Default Re: HELP! S3 cannot wake from sleep

    okay here you are. orginally had d strap, moved to it.
    everything set to auto. values i reported are actuals not set by me


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •