Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: overclock problem with win 7




  1. #21
    Join Date
    Feb 2009
    Posts
    23

    Default Re: overclock problem with win 7

    Quote Originally Posted by Chike View Post
    That's a good start, but not enough, I would run at least an hour or two of Prime95/Orthos small FFT and then if it pass an 8+ hours of blend, before declaring it stable.
    alright.
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

  2. #22
    Join Date
    Feb 2009
    Posts
    23

    Default Re: overclock problem with win 7

    Well I'm back again, and got windows 7 home premium x64 installed. First before I put 7 on I went ahead and completely wiped my hard drive so I would start fresh. So then I restarted computer, went into bios, loaded optimized defaults.

    Well I got the same problem with it. Can't run it up 4.0ghz without it missing display and chipset drivers. The highest I can go with it is 3.96. Yes, I know that there is not much difference in speed with 3.96 than 4.0. I had no problems hittin' 4ghz with win xp pro x86.
    <<< System Summary >>>
    > Power Supply: Cooler Master 600 watt
    > Mainboard : Gigabyte GA-EP45-UD3P rev. 1.1 bios F10
    > HSF: Xigmatek HDT-S1283V Dark Knight
    > Processor : Core 2 quad 2.83GHz @ 3.80GHz
    > Physical Memory : Corsair Dominator 4GB (4 x 1GB) @ 5-5-5-15 2.1v
    > Video Card : Ati Radeon HD 5770
    > Operating System : Win 7 X64
    > Case : Antec 300

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •