Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 54

Thread: System Memory Multiplier Question




  1. #31
    Join Date
    Jul 2009
    Posts
    93

    Default Re: System Memory Multiplier Question

    No I haven't run (IBT). How do I get to MemSet in Performance Level. I would like to OC more (only if I can keep it stable). I had it to 4.25 but it wasn't stable. It is tricky because of the choices the BIOS gives for the system memory multiplier.
    GA-EP45-UD3P, Rev.1.6, BIOS FA,
    Intel E8500 Proc.@4256MHz
    Antec 900 Case
    Corsair 650 TX PSU
    Zalman CNPS9700 CPU Cooler
    OCZ Reaper DDR2 1066 4 GB RAM
    XFX Radeon 4850 1 GB Video Card
    3 160 GB Seagate Hard Drives
    Sony DRU-810A DVD Drive

  2. #32
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: System Memory Multiplier Question

    Download MemSet and run it, you will see a value for Performance Level there.
    IBT is not only another strees test to run, it can also indicate if CPU is working at full power. Run it with high or max stress level for 10 passes, if it fails or GFlops are too low there is probably a need for more vcore.
    It produce much more heat than Prime95, but you should be good, just watch the temps.
    Post IBT results screen capture (Alt+PrintScreen will capture active window only)

  3. #33
    Join Date
    Jul 2009
    Posts
    93

    Default Re: System Memory Multiplier Question

    Will do tomorrow. And thank you for the help.
    GA-EP45-UD3P, Rev.1.6, BIOS FA,
    Intel E8500 Proc.@4256MHz
    Antec 900 Case
    Corsair 650 TX PSU
    Zalman CNPS9700 CPU Cooler
    OCZ Reaper DDR2 1066 4 GB RAM
    XFX Radeon 4850 1 GB Video Card
    3 160 GB Seagate Hard Drives
    Sony DRU-810A DVD Drive

  4. #34
    Join Date
    Jul 2009
    Posts
    93

    Default Re: System Memory Multiplier Question

    This is Intel Burntest
    GA-EP45-UD3P, Rev.1.6, BIOS FA,
    Intel E8500 Proc.@4256MHz
    Antec 900 Case
    Corsair 650 TX PSU
    Zalman CNPS9700 CPU Cooler
    OCZ Reaper DDR2 1066 4 GB RAM
    XFX Radeon 4850 1 GB Video Card
    3 160 GB Seagate Hard Drives
    Sony DRU-810A DVD Drive

  5. #35
    Join Date
    Jul 2009
    Posts
    93

    Default Re: System Memory Multiplier Question

    Here is MemSet
    GA-EP45-UD3P, Rev.1.6, BIOS FA,
    Intel E8500 Proc.@4256MHz
    Antec 900 Case
    Corsair 650 TX PSU
    Zalman CNPS9700 CPU Cooler
    OCZ Reaper DDR2 1066 4 GB RAM
    XFX Radeon 4850 1 GB Video Card
    3 160 GB Seagate Hard Drives
    Sony DRU-810A DVD Drive

  6. #36
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: System Memory Multiplier Question

    IBT results looks good.
    Save a BIOS profile(F11 in main BIOS screen) for stable 4GHz if you have not done it yet.
    What is the Performance Level in MemSet? Maybe memory can be teaked for a bit more performance.
    What you plan next? Little more FSB?

  7. #37
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: System Memory Multiplier Question

    Oops u posted faster.
    After saving BIOS profile, try to set lower Static tRead Value, 9 or 8 should be possible.
    Run MaxxMEM again for comparison.

  8. #38
    Join Date
    Jul 2009
    Posts
    93

    Default Re: System Memory Multiplier Question

    I set both channels to 9
    GA-EP45-UD3P, Rev.1.6, BIOS FA,
    Intel E8500 Proc.@4256MHz
    Antec 900 Case
    Corsair 650 TX PSU
    Zalman CNPS9700 CPU Cooler
    OCZ Reaper DDR2 1066 4 GB RAM
    XFX Radeon 4850 1 GB Video Card
    3 160 GB Seagate Hard Drives
    Sony DRU-810A DVD Drive

  9. #39
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: System Memory Multiplier Question

    Much better read/copy and lower latency. 8 is no go?

  10. #40
    Join Date
    Jul 2009
    Posts
    93

    Default Re: System Memory Multiplier Question

    Are you saying leave it at 9? What are we actually looking for in MaxxMem. Should latency low?
    GA-EP45-UD3P, Rev.1.6, BIOS FA,
    Intel E8500 Proc.@4256MHz
    Antec 900 Case
    Corsair 650 TX PSU
    Zalman CNPS9700 CPU Cooler
    OCZ Reaper DDR2 1066 4 GB RAM
    XFX Radeon 4850 1 GB Video Card
    3 160 GB Seagate Hard Drives
    Sony DRU-810A DVD Drive

Page 4 of 6 FirstFirst ... 23456 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •