Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 6 FirstFirst ... 456
Results 51 to 54 of 54

Thread: System Memory Multiplier Question




  1. #51
    Join Date
    Jul 2009
    Posts
    93

    Default Re: System Memory Multiplier Question

    Right now I am running Prime95. I had pushed the CPU Freq. up 2 to 424 . I started having stability problems. So I reset and I am going to let Prime run overnight if it will.
    GA-EP45-UD3P, Rev.1.6, BIOS FA,
    Intel E8500 Proc.@4256MHz
    Antec 900 Case
    Corsair 650 TX PSU
    Zalman CNPS9700 CPU Cooler
    OCZ Reaper DDR2 1066 4 GB RAM
    XFX Radeon 4850 1 GB Video Card
    3 160 GB Seagate Hard Drives
    Sony DRU-810A DVD Drive

  2. #52
    Join Date
    Jul 2009
    Posts
    93

    Default Re: System Memory Multiplier Question

    I wanted to thank you for your help. I am going to leave it as is. I did go in and set CPU Termination to 1.3. I do have stable 4 GHzs and if I went through all the changes to get it much higher I probably wouldn't be able to tell. Have a good day.
    GA-EP45-UD3P, Rev.1.6, BIOS FA,
    Intel E8500 Proc.@4256MHz
    Antec 900 Case
    Corsair 650 TX PSU
    Zalman CNPS9700 CPU Cooler
    OCZ Reaper DDR2 1066 4 GB RAM
    XFX Radeon 4850 1 GB Video Card
    3 160 GB Seagate Hard Drives
    Sony DRU-810A DVD Drive

  3. #53
    Join Date
    Jul 2009
    Posts
    93

    Default Re: System Memory Multiplier Question

    Chike I have raised Vcore to 1.325 because it was at 1.25625 and in CPUz it showed up as 1.22. Now it shows up as 1.28 to 1.29 running Prime95. It hasn't affected my ability to go above 4.0GHz but MaxxMem is smoking.
    GA-EP45-UD3P, Rev.1.6, BIOS FA,
    Intel E8500 Proc.@4256MHz
    Antec 900 Case
    Corsair 650 TX PSU
    Zalman CNPS9700 CPU Cooler
    OCZ Reaper DDR2 1066 4 GB RAM
    XFX Radeon 4850 1 GB Video Card
    3 160 GB Seagate Hard Drives
    Sony DRU-810A DVD Drive

  4. #54
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: System Memory Multiplier Question

    Well to go past 4Ghz, you may just need more than 1.3-1.35+ Actual Vcore is all

Page 6 of 6 FirstFirst ... 456

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •