Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: P45-UD3P BootBlock BIOS help




  1. #1
    Join Date
    Aug 2009
    Posts
    17

    Default P45-UD3P BootBlock BIOS help

    Hey all,
    i have a big issue here ... this is what i get after i shutdown my pc -> http://yfrog.com/2pp1020449ej

    I flashed for the newest bios version ... and still got nothing , what can i try ?

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: P45-UD3P BootBlock BIOS help

    Is this after or before post?

  3. #3
    Join Date
    Aug 2009
    Posts
    17

    Default Re: P45-UD3P BootBlock BIOS help

    before post ... i heard pplz getting this message and freeze ... but i'm getting a bootloop with this message.

  4. #4
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: P45-UD3P BootBlock BIOS help

    How did yoy flash BIOS then? Can you get into BIOS? Isn't there a new option in Advanced BIOS Settings that can disable this?

  5. #5
    Join Date
    Aug 2009
    Posts
    17

    Default Re: P45-UD3P BootBlock BIOS help

    How did yoy flash BIOS then? Can you get into BIOS? Isn't there a new option in Advanced BIOS Settings that can disable this?
    well if i take off the battery for a few hours then i can turn pc on back and its all good ... untill i shut it off again.

    UPDATE :
    seems like the problem is solved ... well kinda ...
    i got mad and started to pull off every hardware on mobo till i notice the system is posting with one stick of ram , so i thought it might be a bad stick or something ... but it doesn't , the system wont boot with Dual-Channel , only in single WTF ?!
    never happened to me . i have 2x2gb sticks which worked just fine untill one day this mobo got crazy ?!
    Last edited by ob9; 10-22-2009 at 08:30 AM.

  6. #6
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: P45-UD3P BootBlock BIOS help

    Maybe they got "tired", maybe the mobo did. Maybe settings were on the edge.
    Load optimized defaults, enter MIT and set Performance enhance to standard.
    Test each stick indivifually with memtest86+ in slot #1, for 3+ passes, than at least one good stick in slot #3. If ram is ok and slot #3 fail test slots 2 & 4.
    Try to increase MCH Core graduately, one step at a time, up to 1.26v.
    If increasing it does not help try less MCH Core 1.05v and down to 0.95v, one step at a time.

    Please fill your system specs and a link to your ram specs.

  7. #7
    Join Date
    Aug 2009
    Posts
    17

    Default Re: P45-UD3P BootBlock BIOS help

    well i didn't run the mem tests but i already tried different DIMM's with dual channel ... and this is a no go.

    my bios ver is F10f (is there a way to downgrade to older bios ver ?)
    and my ram modules: http://www.corsair.com/_datasheets/T...6-8500C5DF.pdf
    Last edited by ob9; 10-22-2009 at 06:30 PM.
    Q6600
    GA-P45-UD3P
    2x HD4850
    Corair 8500C5D
    Corsair HX750w
    WD Caviar Green 500gb RAID0
    WD 120GB

  8. #8
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: P45-UD3P BootBlock BIOS help

    1. Boot with only 1 memory module in slot #1.
    2. Enter bios and load OPTIMIZED bios settings.
    3. Save settings and exit.
    4. Re enter the bios.
    5. Make required bios changes for voltages and memory timings with:
    • Dram Voltage = 2.10 volts
    • Primary memory timings = 5-5-5-15
    • Set memory speed to 800MHz

    6. Any other required bios changes for your system
    7. Save these new settings as a bios profile from the main bios screen.
    8. Save settings and exit.
    9. Power off your system.
    10. Turn the power off using the psu on/off switch.
    11. Install the second memory module in slot #3.
    12. Power up your system.
    13. Pray.
    This post has basic recommended settings for running at standard speeds.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  9. #9
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: P45-UD3P BootBlock BIOS help

    Quote Originally Posted by profJim View Post
    12. Power up your system.
    13. Pray.
    13 before 12 might yield better results.

  10. #10
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: P45-UD3P BootBlock BIOS help

    ^^^^^ Good point!!

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •