Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 9 FirstFirst 1234 ... LastLast
Results 11 to 20 of 84

Thread: GA-EP45T-UD3LR ......memo problem ?




  1. #11
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    Dram voltage set auto
    now my system runs @ FSB = 400 which is working with cpu multiplier = 8 but ram @1333

    my goal is ram @ 1600 and keep cpu multiplier = 9
    Last edited by saad1957; 10-23-2009 at 02:05 AM.

  2. #12
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    Memory is over volted, it should not need more than 1.7v(or just a little more)
    Also CPU PLL is set too high, please read this post for basic setting before OCing and which values should not be left on auto and which should.

  3. #13
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    I did all in that post FSB = 400 cpu 9 ram @ 1600
    pc booted 3 times and i get this.......................I mean back to default fsb 333 ram @1333

  4. #14
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    If the computer do multiple boots there is problem with settings, and when if finaly boots it use different settings than you made in BIOS.
    Start by loading optimized defaults, then save reboot, enter BIOS and make changes you made so far.
    Try to get memory at 1600 first then CPU overclock.
    Set CPU Ratio 7(for now) Performance Enhance standard, MCH Core to 1.2v. if no go, try MCH Core 1.22v, then 1.24v if 1.22 is not good.
    We need your full BIOS settings.

    EDIT: not having your system specs in your signature make it very difficult to asist you. Please fill it.

  5. #15
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    i did as you say cpu 7 and these settings and same thing 3 times booting and back to default<TABLE border=0 cellSpacing=0 cellPadding=6 width="100%"><COLGROUP><COL width=256><TBODY><TR><TD width="100%">


    PCI Express Frequency (Mhz)-------------100


    Performance Enhance ------------------- Standard


    Motherboard Voltage Control
    CPU
    CPU Vcore ------------------1
    ٫3125
    CPU Termination ---------- 1.200V
    CPU PLL -------------------- 1.55

    MCH/ICH
    MCH Core ---------------- 1.24

    ICH I/O ---------- [Auto]
    ICH Core --------- [Auto]

    DRAM
    DRAM Voltage ------------ 1.7

    Advanced Settings-
    Limit CPUID Max. to 3 -------------------- : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ----------------- : [Disabled]
    C2/C2E State Support -------------------- : [Disabled]
    x C4/C4E State Support ------------------ : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------- : [Enabled]
    CPU EIST Function ----------------------- : [Disabled]
    Virtualization Technology ----------------- : [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect --------------- Disabled





    </TD></TR></TBODY></TABLE>
    Last edited by saad1957; 10-23-2009 at 03:12 AM. Reason: correction

  6. #16
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    thank you for helping me and here what you asked for
    MOBO : GA-EX58-UD3R
    CPU : I7-920
    RAM : KINGSTON KVR1066D3N7/3G ValueRAM
    card : gigabyte GT 430

  7. #17
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    I realy need your full BIOS settings.
    What is your motherboard BIOS version?

  8. #18
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    here detailed as in my mobo , bios f6b

    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [7]
    CPU Frequency ---------------------: 7*400

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [400]
    PCI Express Frequency (Mhz) ---------- : [100]

    C.I.A.2 ------------------------------ : [Disabled]

    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800]
    PCI Express Clock Drive -------------- : [900]
    CPU Clock Skew (ps) ------------------ : 0]
    MCH Clock Skew (ps) ------------------ : [0]

    DRAM Performance Control
    Performance Enhance ------------------- : [STANDARD]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [Auto]
    Memory Frequency (Mhz) ---------------- : [1600]
    DRAM Timing Selectable ---------------- : [MANUAL ]

    Standard Timing Control
    CAS Latency Time -------- 7 ---------- : [MANUAL ]
    tRCD ------------------------- 7 ---------- : [MANUAL ]
    tRP --------------------------- 7----------- : [MANUAL ]
    tRAS ------------------- ----24------------ : [MANUAL ]

    Advanced Timing Control
    tRRD -------------------- ------------ : [Auto]
    tWTR ------------------- ------------ : [Auto]
    tWR --------------------- ------------ : [Auto]
    tRFC ------------------- -- ---------- : [Auto]
    tRTP ------------------- -- ---------- : [Auto]
    Command Rate (CMD) --------- : [Auto] -

    Driving Strength Profiles
    Driving Strength --------- N/A
    Channel A
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto]
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Channel B
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto]
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Motherboard Voltage Control
    CPU

    CPU Vcore --------------- 1.3125V---- : [MANUAL ]

    CPU Termination --------- 1.2V* ----- : [MANUAL ]
    CPU PLL ----------------- 1.5V* ----- : [MANUAL ]

    CPU Reference ----------- ----- : [Auto]
    CPU Reference2 ---------- ----- : [Auto]

    MCH/ICH
    MCH Core ---------------- 1.24V ------- : [MANUAL ]
    MCH Reference ----------- ------- : [Auto]
    MCH/DRAM Ref ------------ ------ : [Auto]
    ICH I/O ----------------- ------- : [Auto]
    ICH Core ---------------- ------- : [Auto]
    DRAM
    DRAM Voltage ------------ 1.7V ------- : [MANUAL ]
    DRAM Termination -------- ------- : [Auto]
    Channel A Reference ------------- : [Auto]
    Channel B Reference ----- ------- : [Auto]

    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [Disabled]
    Last edited by saad1957; 10-23-2009 at 04:28 AM.
    MOBO : GA-EX58-UD3R
    CPU : I7-920
    RAM : KINGSTON KVR1066D3N7/3G ValueRAM
    card : gigabyte GT 430

  9. #19
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    OK, set
    Code:
    System Memory Multiplier -------------- : [4.00D]
    And see if you can boot, if no go, try 1.26v MCH. If that does not work, try lower MCH Core, 1.05v, 1.00v.

  10. #20
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    I tried all that but no go for MCH 1.05 i ddid'nt find it but i put 0.950
    MOBO : GA-EX58-UD3R
    CPU : I7-920
    RAM : KINGSTON KVR1066D3N7/3G ValueRAM
    card : gigabyte GT 430

Page 2 of 9 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •