Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 9 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 84

Thread: GA-EP45T-UD3LR ......memo problem ?




  1. #31
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    Maybe 7 not possible with 1333 @400FSB, 8 is good.

  2. #32
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    thank you again , and before i go 3 questions :
    1- i will continue popup 10mhz each step but when it does'nt reboot what parameters to try changing.
    2- what is the best for performance 1:1 or 1:2 cpu:ram
    3- where in this mobo the equivalent to a) fsb voltage. b)north bridge voltage. c)north bridge frequency
    Last edited by saad1957; 10-23-2009 at 08:11 AM.
    MOBO : GA-EX58-UD3R
    CPU : I7-920
    RAM : KINGSTON KVR1066D3N7/3G ValueRAM
    card : gigabyte GT 430

  3. #33
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    FSB:RAM Ratio is not too important if at all, whatever you can make work is good.
    FSB voltage equivalent is CPU Termination, NorthBridge voltage is MCH Core, NorthBridge frewuency is FSB.

    I don't know the E6850, does it has 0.5 multipliers? You can get it to 3.6GHz at 400 FSB with CPU Ratio 9.
    You shoukld try keep memory around 1333 or below.
    I would try next 417FSB with 3.20B multiplier, that can get you up to 3.75GHz, than you would have to use 2.40B or 2.66D multipliers. Always use CPU Ratio that result with same or lower CPU speed when increasing FSB, then when you see FSB and ram are stable try to increase it.
    You will need higher Static tRead when you increase FSB.
    Last edited by Chike; 10-23-2009 at 08:37 AM.

  4. #34
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    no 0.5 ratio and i did try ratio 9 to get 3.6 speed but most of the time does't boot or if bootig either i get BSOD after minutes or after sleep keep booting
    MOBO : GA-EX58-UD3R
    CPU : I7-920
    RAM : KINGSTON KVR1066D3N7/3G ValueRAM
    card : gigabyte GT 430

  5. #35
    Join Date
    Oct 2009
    Location
    uk
    Posts
    46

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    what do you have cooling the cpu?

    the 6850 is a warm running cpu and temps will be your limiting factor imo

  6. #36
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    default cooling nothing extra
    MOBO : GA-EX58-UD3R
    CPU : I7-920
    RAM : KINGSTON KVR1066D3N7/3G ValueRAM
    card : gigabyte GT 430

  7. #37
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    Stock cooler not too good for overclock. Use CoreTemp or RealTemp to watch core temps. Don't let them go over 75c. For me safe temps are under 70c for normal use.

  8. #38
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    this is my actual setting and temp 65 100% load


    tRD Phase2 Adjustment ------------- : [Auto]
    tRD Phase3 Adjustment ------------- : [Auto]
    Trd2rd(Different Rank) -------------- : [Auto]
    Twr2wr(Different Rank) ------------ : [Auto]
    Twr2rd(Different Rank) ------------- : [Auto]
    Trd2wr(Same/Diff Rank) ------------ : [Auto]
    Dimm1 Clock Skew Control --------- : [Auto]
    Dimm2 Clock Skew Control --------- : [Auto]
    Motherboard Voltage Control
    CPU Vcore --------- 1.3125V---- : [MANUAL ]
    CPU Termination --- 1.2V ----- : [MANUAL ]
    CPU PLL ------------- 1.5V ----- : [MANUAL ]
    CPU Reference ---------- ----- : [Auto]
    CPU Reference2 --------- ----- : [Auto]
    MCH/ICH
    MCH Core ---1٫2V : [MANUAL ]
    MCH Reference ----------- ------- : [Auto]
    MCH/DRAM Ref ------------ ------ : [Auto]
    ICH I/O ----------------- ------- : [Auto]
    ICH Core ---------------- ------- : [Auto]
    DRAM
    DRAM Voltage ----- 1.7V ------- : [MANUAL ]
    DRAM Termination -------- ------- : [Auto]
    Channel A Reference ------------- : [Auto]
    Channel B Reference ----- ------- : [Auto]
    Advanced Settings
    Limit CPUID Max. to 3 ---------- : [Disabled]
    No-Execute Memory Protect ---- : [Enabled]
    CPU Enhanced Halt (C1E) ------ : [Disabled]
    C2/C2E State Support ----------- : [Disabled]
    x C4/C4E State Support --------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) -- : [Enabled]
    CPU EIST Function -------------- : [Disabled]
    Virtualization Technology ------- : [Disabled]
    Integrated Peripherals
    Legacy USB Storage Detect ---- : [Disabled]
    bust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [8]
    CPU Frequency ---------------------:8*400
    CPU Host Clock Control ---------- : [Enabled]
    CPU Host Frequency (Mhz) ------------: [400]
    PCI Express Frequency (Mhz) -------- : [100]
    C.I.A.2 ---------------------------- : [Disabled]
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800]
    PCI Express Clock Drive -------------- : [900]
    CPU Clock Skew (ps) ------------------ : 0]
    MCH Clock Skew (ps) ------------------ : [0]
    DRAM Performance Control
    Performance Enhance -------- : [STANDARD]
    (G)MCH Frequency Latch ------------ : [Auto]
    System Memory Multiplier --------- : [3٫33D]
    Memory Frequency (Mhz) ----------- : [1333]
    DRAM Timing Selectable ------- : [MANUAL ]
    Standard Timing Control
    CAS Latency Time ---- 6 ------- : [MANUAL ]
    tRCD ----------------- 6 ---------- : [MANUAL ]
    tRP ------------------- 6----------- : [MANUAL ]
    tRAS ----------- ----20------------ : [MANUAL ]
    Advanced Timing Control
    tRRD -------------------- ------------ : [Auto]
    tWTR ------------------- ------------ : [Auto]
    tWR --------------------- ------------ : [Auto]
    tRFC ------------------- -- ---------- : [Auto]
    tRTP ------------------- -- ---------- : [Auto]
    Command Rate (CMD) --------- : [Auto] -
    Driving Strength Profiles
    Driving Strength --------- N/A
    Channel A
    Static tRead Value -------------------- : [Auto]
    tRD Phase0 Adjustment ------------- : [Auto]
    tRD Phase1 Adjustment -------------- : [Auto]
    tRD Phase2 Adjustment ------------- : [Auto]
    tRD Phase3 Adjustment ------------- : [Auto]
    Trd2rd(Different Rank) -------------- : [Auto]
    Twr2wr(Different Rank) ------------- : [Auto]
    Twr2rd(Different Rank) ------------- : [Auto]
    Trd2wr(Same/Diff Rank) ------------ : [Auto]
    Dimm1 Clock Skew Control --------- : [Auto]
    Dimm2 Clock Skew Control --------- : [Auto]
    Channel B
    Static tRead Value ------------------- : [Auto]
    tRD Phase0 Adjustment ------------- : [Auto]
    tRD Phase1 Adjustment ------------- : [Auto]
    MOBO : GA-EX58-UD3R
    CPU : I7-920
    RAM : KINGSTON KVR1066D3N7/3G ValueRAM
    card : gigabyte GT 430

  9. #39
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    CPU temp? What kind of load is it?
    Get CoreTemp or RealTemp see what they give.
    But even CPU temps of 65c are not bad, but this is only 3.2GHz, at 3.6GHz with more vcore they may get much higher.

  10. #40
    Join Date
    Oct 2009
    Location
    saudi arabia
    Posts
    43

    Default Re: GA-EP45T-UD3LR ......memo problem ?

    load more than 20 minutes on ORTHOS

    can i make (G)MCH Frequency Latch independent from fsb ?
    another question is it better to use three sticks for ddr3 if yes can i use a third stick ( corsair 1333MHz 9-9-9-24 1.6V)
    this pair here :
    http://www.goods2gold.com/auction/au...tion_id=100001
    Last edited by saad1957; 10-24-2009 at 04:43 AM.
    MOBO : GA-EX58-UD3R
    CPU : I7-920
    RAM : KINGSTON KVR1066D3N7/3G ValueRAM
    card : gigabyte GT 430

Page 4 of 9 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •