Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: ga-ep45-ud3p which mem




  1. #11
    Join Date
    Oct 2009
    Location
    UK
    Posts
    8

    Default Re: ga-ep45-ud3p which mem

    stick s aint new they are from my maximus formula but i changed to this board for the higher FSB speeds and they worked flawlessly together in the other board with out issue at any speed i needed

  2. #12
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: ga-ep45-ud3p which mem

    With one stick installed, load optimized defaults, save reboot, enter BIOS and make the following changes for DDR-800:
    Code:
    DRAM Performance Control
    Performance Enhance...................: [Standard]
    Extreme Memory Profile (X.M.P.).....: [Disabled]
    System Memory Multiplier ..............:[2.40B]
    
    MCH/ICH
    MCH Core…………….....1.100V...........: 1.10v
    Save & reboot, turn the computer off, turn the PSU off, press the power button for 5 seconds and install the other memory stick and try to boot.

    In case of multiple boots, shut the computer down, turn the PSU off and wait 20 seconds, turn the PSU on and power on, the computer should reboot after few attempts. You may need to repeat this process more than once.
    Re-enter BIOS and try to decrease MCH Core, one step at a time, save and reboot again.
    If decreasing it does not help, try increasing it above 1.1v one step each time, up to 1.24v.

  3. #13
    Join Date
    Oct 2009
    Location
    UK
    Posts
    8

    Default Re: ga-ep45-ud3p which mem

    still no luck guys getting ram in duel channel working. had some sticks of patriot ram in it today (1150mhz 4 x 1gb) could get 2 installed to boot but not in duel channel .

    has any one got this board rev 1.1 with Bios f10f (latest) ifso what ram you got in yours

    thanks ian

  4. #14
    Join Date
    Sep 2009
    Posts
    7

    Default Re: ga-ep45-ud3p which mem

    Im running the Gskill pc8500 1066, and using 4 of the 2gb sticks = 8gb. it wanted to run 5-7-7-20 2.1 on auto but i changed it to 5-5-5-15 @ 2.1v and it runs totally stable at either setting memory has never been an issue with this board+mem combo for me from f6 all the way through f10e no issues ever. I even bought these, 2- 4gb kits from the egg 2 months apart. hope this helps.

    I would RMA that board but thats just my opinion.
    Last edited by Darcon; 10-31-2009 at 02:05 PM.
    Coolermaster HAF 922
    Corsair TX850 PSU - Gigabyte EP45-UD3P rev1.1 f10e
    Noctua NH-U12P with arctic cool 120 pwm fan
    Q9650 @ 4.0Ghz Stable - Evga GTX 295
    8 Gb G-Skill F2-8500CL5D-4GBPk 5-5-5-15@2.1v

    KLH AT2100 2.1 Audio
    Gateway 2485W Monitor And Philips 47" LCD
    Vista Ult. X64

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •