Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: help with EP45-UD3P




  1. #1
    Join Date
    Oct 2009
    Location
    mesa, az
    Posts
    6

    Default help with EP45-UD3P

    I ve been having problems alot of problems with my first build.
    to begin, numerious BSODs, minidumps point to a Ram issue and driver issues,
    But before i can even load up OS (vista-64), it takes at least 3 boots (turn on then turn off...wait-Repeat) to get to POST/BIOs screen. Its my first build, i never changed any of the BIO settings until I found this board and tried these settings
    "PCI Express Frequency (Mhz) --------------- : [Auto] <--- set to 100

    Performance Enhance ------------------- : [Turbo] <--- set to Standard when overclocking
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled

    Motherboard Voltage Control
    CPU

    CPU Vcore --------------- 1.????? ------ : [Auto] <--- set to the 1.????? value displayed in your bios
    CPU Termination ---------- 1.200V* ----- : [Auto] <--- set to the value to the left (Auto over-volts this too much when overclocking) Auto is OK if not overclocking
    CPU PLL ------------------ 1.500V* ----- : [Auto] <--- set to the value to the left (Auto over-volts this too much when overclocking) Auto is OK if not overclocking

    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [Auto] <--- set to 1.20 for 2x2GB ram (1.24 - 1.26, or 1.05 might be needed)

    ICH I/O ------------------ 1.500V ------- : [Auto] <--- set to the value displayed in your bios
    ICH Core ----------------- 1.100V ------- : [Auto] <--- set to the value displayed in your bios

    DRAM
    DRAM Voltage ------------ 1.800V ------- : [2.20*] <--- set to the max rated ram voltage (for most memory)"
    (by profJim)

    *G-skill F2-8500CL5D

    These settings failed to boot and were reset automatically

    BIO ver F6

  2. #2
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: help with EP45-UD3P

    Did you load Optimized bios settings before making your bios changes.
    The settings used in your first post came from this post.
    Use the generic bios template for your mobo from here.
    Follow the directions for accurately filling in your current bios settings and post your settings.

    You have a very old bios, version F11 is the current version and can be downloaded from here.
    Follow the bios flashing instructions in the BIOS Flashing - A "How To ~ Qflash Guide" thread.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #3
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help with EP45-UD3P

    Quote Originally Posted by onetimeonly View Post
    These settings failed to boot and were reset automatically
    How do you mean? When you enter BIOS again they are reverted to defaults?

  4. #4
    Join Date
    Oct 2009
    Location
    mesa, az
    Posts
    6

    Default Re: help with EP45-UD3P

    I loaded optomized settings and saved.
    I post all settings later
    BIOS are old, but is it safe for me to q-flash in its condition?


    after i tried those settings, It still wouldn't boot and had a nice little message for me saying, a recent clock or voltage change has resulted in a failed boot and has reverted back to defaults.

    I just want my system stable, i dont plan on OC this build.

  5. #5
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: help with EP45-UD3P

    Quote Originally Posted by onetimeonly View Post
    i dont plan on OC this build.
    You may not, but we have other plans for you *evil laugh*

    Well till you post the settings there's nothing to say.

  6. #6
    Join Date
    Oct 2009
    Location
    mesa, az
    Posts
    6

    Default Re: help with EP45-UD3P

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [9 x]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: 3.00ghz (333x9)

    <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [disabled]
    CPU Host Frequency (Mhz) --------------: [333]
    PCI Express Frequency (Mhz) ---------- : [100]

    C.I.A.2 ------------------------------ : [Disabled]

    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800mV]
    PCI Express Clock Drive -------------- : [900mV]
    CPU Clock Skew (ps) ------------------ : [0ps]
    MCH Clock Skew (ps) ------------------ : [0ps]

    DRAM Performance Control
    Performance Enhance ------------------- : [Turbo]
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [Auto]
    Memory Frequency (Mhz) ---------------- : [1066]
    DRAM Timing Selectable ---------------- : [Auto]

    Standard Timing Control
    CAS Latency Time -------- 5 ---------- : [Auto]
    tRCD ------------------- 7 ---------- : [Auto]
    tRP --------------------- 7 ---------- : [Auto]
    tRAS ------------------- 20 ---------- : [Auto]

    Advanced Timing Control
    tRRD ------------------- 4 ---------- : [Auto]
    tWTR ------------------- 4 ---------- : [Auto]
    tWR --------------------- 8 ---------- : [Auto]
    tRFC ------------------- 68 ---------- : [Auto]
    tRTP ------------------- 4 ---------- : [Auto]
    Command Rate (CMD) --------- 0 ----------- : [Auto]

    Driving Strength Profiles
    Driving Strength --------- : Press Enter

    Channel A
    Static tRead Value ---------------- 8 ----- : [Auto]
    tRD Phase0 Adjustment ------------ 0 ------ : [Auto]
    tRD Phase1 Adjustment ------------ 0 ------ : [Auto]
    tRD Phase2 Adjustment ------------- 0 ---- : [Auto]
    tRD Phase3 Adjustment ------------- 0 ----- : [Auto]
    Trd2rd(Different Rank) -------------- 8 --- : [Auto]
    Twr2wr(Different Rank) -------------- 8 --- : [Auto]
    Twr2rd(Different Rank) -------------- 7 --- : [Auto]
    Trd2wr(Same/Diff Rank) ------------- 9 ---- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Channel B
    Static tRead Value ---------------- 8 ----- : [Auto]
    tRD Phase0 Adjustment ------------ 0 ------ : [Auto]
    tRD Phase1 Adjustment ----------- 0 ------- : [Auto]
    tRD Phase2 Adjustment ----------- 0 ------- : [Auto]
    tRD Phase3 Adjustment ----------- 0 ------- : [Auto]
    Trd2rd(Different Rank) ------------- 8 ---- : [Auto]
    Twr2wr(Different Rank) ------------ 8 ----- : [Auto]
    Twr2rd(Different Rank) ------------- 7 ---- : [Auto]
    Trd2wr(Same/Diff Rank) ------------ 9 ----- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.25000V ---- : [1.25000]

    CPU Termination --------- 1.200v ----- : [Auto]
    CPU PLL ----------------- 1.500V* ----- : [Auto]

    CPU Reference ----------- 0.760V* ----- : [Auto]
    CPU Reference2 ---------- ?.???V* ----- : [Auto]

    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.200V]
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [1.500]
    ICH Core ---------------- 1.100V ------- : [1.100]
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [2.200V]
    DRAM Termination -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]

    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Enabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [Enabled]
    Virtualization Technology -------------- : [Enabled]

    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [Enabled] <o:p></o:p>
    Last edited by onetimeonly; 10-25-2009 at 06:14 AM.

  7. #7
    Join Date
    Oct 2009
    Location
    Earth
    Posts
    6

    Default Re: help with EP45-UD3P

    which board does the OP have: topic say UD3P but sig says UD3R?
    Intel Q6600 G0 1.325V VID @ 8x415MHz 1.45Vcore
    Xigmatek S1283
    GA-EP45-UD3P V1.0 F1
    0f
    F2-6400CL5D-4GBPQ
    MSI HD4870 1GB
    Samsung HD503HJ
    Windows 7 Pro x64 RTM
    Antec P180 + Corsair HX520


  8. #8
    Join Date
    Oct 2009
    Location
    mesa, az
    Posts
    6

    Default Re: help with EP45-UD3R

    Quote Originally Posted by toslat View Post
    which board does the OP have: topic say UD3P but sig says UD3R?
    my mistake i wrote it at 2 in the morning. EP45-UD3R. my sig will link you to it.

  9. #9
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: help with EP45-UD3P

    MCH Core that isn't set properly will prevent your system from booting with your settings.
    You might need 1.22, 1.24, or possibly 1.05 (or a bit higher) volts for MCH Core voltage at stock settings.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  10. #10
    Join Date
    Oct 2009
    Location
    mesa, az
    Posts
    6

    Default Re: help with EP45-UD3P

    i tried MCH core at 1.22 and 1.24 and it isnt any more stable.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •