Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: no post no beep




  1. #1
    Join Date
    Oct 2009
    Location
    canada
    Posts
    2

    Default no post no beep

    have a gigabyte GA-MA785GM-US2H Brand new, AMD athlon II x2 240 dual core and ultra 2gb ram powerup atx case w/450w ps

    Built this and will not post tried the following;
    change ram, cpu to other machine works
    change ram from working machine to new doesn't work
    tried different ram slots
    tried different power buttons
    have concluded either power supply or MB
    before i send both back
    this motherboard has a 8-pin ATX 12V power connector
    but the power supply has a 4-pin
    this was a barebones kit from tigerdirect
    and after reading the comments people have good results with this
    and no mention of this as a problem
    should this ps work with 4-pin
    any ideas and trick would great thanks in advance

  2. #2
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: no post no beep

    have you plugged in just the four pin cpu power plug? it should boot and run ...the plug will only go in one way and leave four open sockets
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: no post no beep

    4 pin is never suggested in a 8 pin system, sometimes it will work but just depends on your hardware.

    I always suggest using a proper PSU with the board if it is 8pin, not an adapter. So I would suggest a new EPS PSU or that you return the unit and mention to them that not every system like this will work with a 4pin PSU depending on the hardware connected (Mainly CPU used)

    Did you try it out of the case, off the motherboard tray, and with only the minimal connected such as CPU/Heatsink/ One stick of Ram, and GFX Card ONLY nothing else? While I mention that, are you using a larger GFX Card? If so could be that the PSU Cannot handle that card and board all at once, you may need to test with a smaller GFX Card as well if possible

  4. #4
    Join Date
    Oct 2009
    Location
    canada
    Posts
    2

    Default Re: no post no beep

    i have tried mb and cpu with ram still no luck and it is out of the case on piece of cardboard on table.
    a little confused what is the 8-pin used for compared to a 4-pin
    from what i see the 8pin is on the most expensive powers supplies out there
    and a little out of the buget

  5. #5
    stasio's Avatar
    stasio is offline GIGABYTE Elite
    Join Date
    Oct 2007
    Location
    My
    Posts
    5,688

    Default Re: no post no beep

    Buy 4-pin to 8-pin ATX Cable Adapter.
    GA-Z170X-SOC Force , Kaby Lake...
    GA-Z97X
    -SOC Force ,
    Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.7 GHz
    G.Skill F3-2933C12D-8GTXDG
    @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 8.1 x64;
    Win 10 x64

  6. #6
    Reggie is offline Junior Member
    Join Date
    Mar 2009
    Location
    United States
    Posts
    76

    Default Re: no post no beep

    Clear the CMOS.

    Do not insert the power supply cables into pins under the protective covers when using a power supply providing a 2x2 12V.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •