Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: GIGABYTE GA-G41M-ES2L mobo install wont start




  1. #1
    Join Date
    Dec 2008
    Posts
    67

    Default GIGABYTE GA-G41M-ES2L mobo install wont start

    I'm helping my friend with his new mobo/cpu install. we hooked up all the cables installed the cpu and the wiring but. It wont start it's just dead.please help what should we do here. are we doing this wrong?
    Thanks

    Intel Core 2 Quad Q8400 cpu


    GIGABYTE GA-G41M-ES2L mobo

    250w power supply
    8800 video card and 2gb ddr2 memory

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GIGABYTE GA-G41M-ES2L mobo install wont start

    No fans spinning no leds light?

    Best thing to do is try it out of the case on a piece of cardboard, the box itself will do, with only one stick of memory and a PS/2 keyboard connected, nothing else, no hard drives, USB devices, floppy drives, or even the video card (it has a built in video).

    Check the CPU socket for bent pins.
    Make sure the front panel wiring is correct.

    Maybe the PSU is too weak, I know very little about this.

  3. #3
    Join Date
    Dec 2008
    Posts
    67

    Default Re: GIGABYTE GA-G41M-ES2L mobo install wont start

    Yeah totally nothing no lights led none... I'm gonna remove it again and reinstall this board thanks...Anyone else please help

  4. #4
    Join Date
    Dec 2008
    Posts
    67

    Default Re: GIGABYTE GA-G41M-ES2L mobo install wont start

    Problem solved, I just had to push the cpu fan really hard for it to click on all sides, then it all started just like that..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •