Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 32

Thread: EP 45 DS3R and Quad 9300 overclocking help




  1. #21
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: EP 45 DS3R and Quad 9300 overclocking help

    (G)MCH Frequency Latch...............: [400 MHz] Change to auto
    CPU PLL…………………....1.500V.......[auto] Change to 1.500
    MCH Clock Skew (ps)...................: <<< [50ps] Change to 0ps

    If your getting an red error box thats caused by something overvolting. Why do stock when you can overclock?

    Oh BTW do have a link to your memory?

  2. #22
    Join Date
    Nov 2009
    Location
    Toronto
    Posts
    14

    Default Re: EP 45 DS3R and Quad 9300 overclocking help

    Thanks kindly,
    I just tried these setting you just posted.....3rd boot attempt again.....
    I must be doing something wrong.....sorry, I'm a noob @ this stuff.....

    Alex



    Quote Originally Posted by Conners View Post
    Looks at thest settings very closely and make the changes I suggest and correct any that are wrong that you have.

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 7x
    Fine CPU Clock Ratio.....................: +0.5
    CPU Frequency ...........................: 3.01GHz (402x7.5)
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 402Mhz
    PCI Express Frequency (Mhz) .........: 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< [800mV]
    PCI Express Clock Drive.................: <<< [900mV]
    CPU Clock Skew (ps)....................: <<< [0ps]
    MCH Clock Skew (ps)...................: <<< [0ps] 
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD] <--might try Turbo
    Extreme Memory Profile (X.M.P.).....: [Disabled]
    (G)MCH Frequency Latch...............: [400MHz]
    System Memory Multiplier (SPD)..............: [2.00D] <--2.00 B or D
    Memory Frequency (Mhz) ..............: 800 1072 -Can't change
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................ 6 [6]
    tRCD ......................................... 6 [6]
    tRP'...........................................6[6]
    tRAS.......................................... 18[18]
    
    Advanced Timing Control
    tRRD........................................... 3 [3]
    tWTR.......................................... 3 [3]
    tWR............................................ 6 [4]
    tRFC........................................... 46 [52]
    tRTP...........................................3 [4]
    Command Rate (CMD) .................... 0 [ 2]
    
    Driving Strength Profiles
    Driving Strength ............................all AUTO <--might try 1066
    
    Channel A
    Static tRead Value.........................:8 [8]
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:6 [6]  <--Auto
    Twr2wr(Different Rank)...................: 6[Auto] 
    Twr2rd(Different Rank)...................: 5 [Auto] 
    Trd2wr(Same/Diff Rank)..................: 8 [Auto] 
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Channel B
    Static tRead Value.........................: 8 [8]
    tRD Phase0 Adjustment...................:Auto 
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................: 6 [Auto] 
    Twr2wr(Different Rank)...................: 6 [Auto] 
    Twr2rd(Different Rank)...................: 5 [Auto] 
    Trd2wr(Same/Diff Rank)..................: 8 [Auto] 
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.22500V [1.32500V]
    CPU Termination…..... 1.200V.......[auto) <--1.200
    CPU PLL…………………....1.500V.......[auto]<-- 1.500
    CPU Referen.…………....0.760  …..[Auto]
    
    
    MCH/ICH
    MCH Core…………….....1.100V...........:[1.200V]
    MCH Reference….…….0.760V...........[Auto]
    MCH/DRAM Ref.…......0.900V.......... [Auto]
    ICH I/O……………….....1.550V.........[Auto]
    ICH Core…………...……..........[not in list]
    
    DRAM
    DRAM Voltage ……....1.800V............: [2.000V]
    DRAM Termination .…0.900V……. [Auto]
    Channel A Reference 0.900V…….. [Auto]
    Channel B Reference 0.900V…….[ Auto]
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled] {not listed}
    x C4/C4E State Support..................: [Disabled] {not listed}
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    ____________________________________________-
    antec 300 case w/ 3 Xigmatek eXtreme Silent Fans 120mm
    Gigabyte GA-EP45-DS3R Bios F10
    Intel Quad 9300 2.5Ghz
    Scythe Ninja 2 - 6 Heat Pipe CPU cooler w/ slip stream 120mm fan
    4GB OCZ 2P8002G DDR-800(PC2-6400)
    Antec Quattro 850 W PSU
    ATI HD 4770
    Win 7 PRO 64-BIT running on OCX Vertex SSD
    RAID1 WD Caviar 250GB X2

  3. #23
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP 45 DS3R and Quad 9300 overclocking help

    Start with stock, suggested settings set manually to defaults, see that you don't get the red message, test the system for stability.
    Then increase FSB graduately with 2.00B or 2.00D multiplier(whicheever works) ,make nesessary adjustments to Vcore, VTT(CPU Termination), and MCH Core.

  4. #24
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: EP 45 DS3R and Quad 9300 overclocking help

    One more note if I picked your memory out right you should have timings of 5 4 4 15 @ 2.1V. Also your advanced timings probably should be higher, such as 4 4 8 68 4 2 and go down from there. The latter setting will certainly cause the red error.
    Last edited by Conners; 11-18-2009 at 06:11 AM.

  5. #25
    Join Date
    Nov 2009
    Location
    Toronto
    Posts
    14

    Default Re: EP 45 DS3R and Quad 9300 overclocking help

    Thanks for the help....
    I will keep trying, on the weekend. as I'm leaving town for business until Friday.

    I will keep you updated on the project,

    Thanks again for all your patience and help with the noob,

    Have a great evening,

    Alex
    ____________________________________________-
    antec 300 case w/ 3 Xigmatek eXtreme Silent Fans 120mm
    Gigabyte GA-EP45-DS3R Bios F10
    Intel Quad 9300 2.5Ghz
    Scythe Ninja 2 - 6 Heat Pipe CPU cooler w/ slip stream 120mm fan
    4GB OCZ 2P8002G DDR-800(PC2-6400)
    Antec Quattro 850 W PSU
    ATI HD 4770
    Win 7 PRO 64-BIT running on OCX Vertex SSD
    RAID1 WD Caviar 250GB X2

  6. #26
    Join Date
    Nov 2009
    Location
    Toronto
    Posts
    14

    Default Re: EP 45 DS3R and Quad 9300 overclocking help

    ____________________________________________-
    antec 300 case w/ 3 Xigmatek eXtreme Silent Fans 120mm
    Gigabyte GA-EP45-DS3R Bios F10
    Intel Quad 9300 2.5Ghz
    Scythe Ninja 2 - 6 Heat Pipe CPU cooler w/ slip stream 120mm fan
    4GB OCZ 2P8002G DDR-800(PC2-6400)
    Antec Quattro 850 W PSU
    ATI HD 4770
    Win 7 PRO 64-BIT running on OCX Vertex SSD
    RAID1 WD Caviar 250GB X2

  7. #27
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: EP 45 DS3R and Quad 9300 overclocking help

    Well just when you can, I stand corrected your timings are 4 5 4 15 @ 2.1 volts.

  8. #28
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP 45 DS3R and Quad 9300 overclocking help


  9. #29
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    849

    Default Re: EP 45 DS3R and Quad 9300 overclocking help

    Yeah chike that wot I came up with also, so might want to see whats listed on the side of your memory as far as timings and voltage goes when you get the time.

  10. #30
    Join Date
    Nov 2009
    Location
    Toronto
    Posts
    14

    Default Re: EP 45 DS3R and Quad 9300 overclocking help

    After dinner, I started from scratch (the "stock" settings that work) and I got here......(below) and still getting the red bios error...

    I will play with it when I return on the weekend.
    Thanks again for all the time spent on me, got to pack, early flight in the morning.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 7x
    Fine CPU Clock Ratio.....................: +0.5
    CPU Frequency ...........................: 3.01GHz (402x7.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 402Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< [800mV]
    PCI Express Clock Drive.................: <<< [900mV]
    CPU Clock Skew (ps)....................: <<< [0ps]
    MCH Clock Skew (ps)...................: <<< [0ps]

    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: [Disabled]
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier (SPD)..............: [2.00D]
    Memory Frequency (Mhz) ..............: 800 804 – cannot change
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 6 [6]
    tRCD ......................................... 6 [6]
    tRP'...........................................6[6]
    tRAS.......................................... 18[18]

    Advanced Timing Control
    tRRD........................................... 3 [3]
    tWTR.......................................... 3 [3]
    tWR............................................ 6 [4]
    tRFC........................................... 46 [46]
    tRTP...........................................3 [4]
    Command Rate (CMD) .................... 0 [ 2]

    Driving Strength Profiles
    Driving Strength ............................all AUTO

    Channel A
    Static tRead Value.........................:8 [8]
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:6 [6]
    Twr2wr(Different Rank)...................: 6[Auto]
    Twr2rd(Different Rank)...................: 5 [Auto]
    Trd2wr(Same/Diff Rank)..................: 8 [Auto]
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................: 8 [8]
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................: 6 [Auto]
    Twr2wr(Different Rank)...................: 6 [Auto]
    Twr2rd(Different Rank)...................: 5 [Auto]
    Trd2wr(Same/Diff Rank)..................: 8 [Auto]
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.22500V [1.32500V]
    CPU Termination…..... 1.200V.......[1.260v]
    CPU PLL…………………....1.500V.......[1.50v]
    CPU Referen.…………....0.760 …..[Auto]


    MCH/ICH
    MCH Core…………….....1.100V...........:[1.100V]
    MCH Reference….…….0.760V...........[Auto]
    MCH/DRAM Ref.…......0.900V.......... [Auto]
    ICH I/O……………….....1.500V.........[Auto]
    ICH Core…………...……..........[not in list]

    DRAM
    DRAM Voltage ……....1.800V............: [2.000V]
    DRAM Termination .…0.900V……. [Auto]
    Channel A Reference 0.900V…….. [Auto]
    Channel B Reference 0.900V…….[ Auto]
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled] {not listed}
    x C4/C4E State Support..................: [Disabled] {not listed}
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]
    ____________________________________________-
    antec 300 case w/ 3 Xigmatek eXtreme Silent Fans 120mm
    Gigabyte GA-EP45-DS3R Bios F10
    Intel Quad 9300 2.5Ghz
    Scythe Ninja 2 - 6 Heat Pipe CPU cooler w/ slip stream 120mm fan
    4GB OCZ 2P8002G DDR-800(PC2-6400)
    Antec Quattro 850 W PSU
    ATI HD 4770
    Win 7 PRO 64-BIT running on OCX Vertex SSD
    RAID1 WD Caviar 250GB X2

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •