Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Gigabyte ga-ep45-ud3p

  1. #1
    Join Date
    Nov 2009

    Default Gigabyte ga-ep45-ud3p

    I Have a GIGABYTE GA-EP45-UD3P ive owned it for about 2 weeks now and i love it. The only thing i dont like about it is the slow boot up. I turn the power button on and the all of the fans kick in and it sits there for about 23 to 30 seconds then it beeps and it starts up as normal. Everything on the board works great i just hate the slow boot up. Does anybody else have this problem? I have flashed the new bios and updated all of my drivers. Any suggestions would be nice.

    Thanks Matt
    Quick Specs
    Windows Vista Basic 64 Bit
    Tricod 9003 Case
    BFG 9800 GTX OC Graphics Card
    GIGABYTE GA-EP45-UD3P Motherboard Rev 1.6
    Intel Core 2 Duo E8400 Wolfdale 3.0GHz Processor
    6 Gigs Of CORSAIR DDR2 800 RAM
    750 Watt CORSAIR Power Supply
    Western Digital Caviar Green WD5000AADS 500GB Hard Drive
    Last edited by mathew64; 11-19-2009 at 05:48 AM.

  2. #2
    Bongkie is offline Member
    Join Date
    Nov 2009

    Default Re: Gigabyte ga-ep45-ud3p

    Clear your cmos. Take off the battery put the jumper to 2&3 for 10mins

    "CMOS holds details of attached hardware while BIOS stores various settings and values that apply to that hardware as well as motherboard settings. If the hardware has changed for any reason, CMOS details will not match the current setup and the BIOS values will no longer apply and will either fail or become unstable. I'd recommend a CMOS reset when installing or changing any hardware that has a BIOS value which covers just about everything short of inserting a neon light."

    Clear CMOS:
    1.) immediately following a new build, before power is applied
    2.) immediately following any hardware change/upgrade
    3.) after flashing BIOS

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    PCB Island

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts