Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 49

Thread: P55 UD4P regular BSOD and reboot when gaming




  1. #21
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P55 UD4P regular BSOD and reboot when gaming

    Limit? Sounds like you need to copy/paste from notepad and not word, or not use font styles, ect because i can post 2-3 sets of complete settings in one post.

    Anyhow, I checked your settings, here is what should work for you at 1600Mhz for now.

    Are you using the latest BIOS? Just checking, if not please update

    Advanced Frequency Settings: (F4r BIOS version)

    CPU Clock Ratio 20x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[Auto]
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Disabled] – OPTION DOES NOT EXIST FOR I5 COU
    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Auto]
    Bi-Directional PROCHOT...................[Auto]

    QPI Clock Ratio..........................[Auto] << Manually set to x36
    QPI Link Speed........................[4.8GHz]
    Uncore Clock Ratio....................[24-26x] << Manually set to 24-26 (Sometimes +2 above ram speed is much smoother so try 26 first)
    Uncore Frequency.........................

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto] << Manually set to 12 for now = 1600mhz
    Memory Frequency (MHz)................1600
    PCI Express Frequency (MHz)..............[Auto] << 100
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto] << All noted above
    Memory Frequency (MHz)................1600
    Performance Enhance (SPD)............. [Standard]
    DRAM Timing Selectable (SPD)............ [Quick] << Use Expert and set all channels one by one, I think quick causes issues because it sets RTL often the same which can be bad
    Profile DDR Voltage .................. 1.5V
    Profile QPI Voltage .................. 1.1V
    Channel Interleaving.....................[Auto] 4-6
    Rank Interleaving........................[Auto] 6

    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[7-9]
    tRCD....................................[7-9]
    tRP.....................................[7-9]
    tRAS...................................[20-28]

    Since you are underclocking you should be able to do 777-20 or 888-20, start maybe with 888-20 for now

    >>>>> Advanced Timing Control

    tRC....................................[Auto]
    tRRD...................................[Auto]
    tWTR...................................[Auto]
    tWR....................................[Auto]
    tWTP...................................[Auto]
    tWL....................................[Auto]
    tRFC...................................[Auto] << Set 84-94
    tRTP...................................[Auto]
    tFAW...................................[Auto]
    Command Rate (CMD).................. 1 [Auto] << Set 1

    >>>>> Misc Timing Control

    B2B Cas Delay..........................[Auto]
    Round Trip Latency.....................[Auto]

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[Disabled]
    CPU Vcore..................1.25625V..[Auto] have tried up to 1.4V << Auto for now, you are trying to get stock stable right?
    QPI/VTT Voltage..........1.100v.....[Auto] have also tried up to 1.31V << this may need 1.24-1.45+, try 1.28-1.38 for now
    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto] have also tried up to 1.12 << may need 1.2-1.32
    CPU PLL......................1.800v.....[Auto] have also tried up to 1.92V Auto

    >>> DRAM
    DRAM Voltage..............1.500v.....[1.660v]
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Detect ....................[Disabled] – NOT PRESENT IN MY BIOS << it is there, USB Storage Function in Integrated Peripherals page

  2. #22
    Join Date
    Nov 2009
    Location
    Sydney Australia
    Posts
    21

    Default Re: P55 UD4P regular BSOD and reboot when gaming

    Quote Originally Posted by Lsdmeasap View Post
    Limit? Sounds like you need to copy/paste from notepad and not word, or not use font styles, ect because i can post 2-3 sets of complete settings in one post.

    Anyhow, I checked your settings, here is what should work for you at 1600Mhz for now.

    Are you using the latest BIOS? Just checking, if not please update

    Advanced Frequency Settings: (F4r BIOS version)
    Yes I am using F4r already

    CPU Clock Ratio 20x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[Auto]
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Disabled] OPTION DOES NOT EXIST FOR I5 COU
    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Auto]
    Bi-Directional PROCHOT...................[Auto]

    QPI Clock Ratio..........................[Auto] << Manually set to x36
    QPI Link Speed........................[4.8GHz]
    Uncore Clock Ratio....................[24-26x] << Manually set to 24-26 (Sometimes +2 above ram speed is much smoother so try 26 first)
    This option is greyed out for me, so unable to change
    Uncore Frequency.........................

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto] << Manually set to 12 for now = 1600mhz
    I only have options of Auto, 6, 8, 10. Not 12.
    Memory Frequency (MHz)................1600
    PCI Express Frequency (MHz)..............[Auto] << 100
    Did you want me to change this to manually run at 100MHz?
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto] << All noted above
    All noted above? what do you mean?
    Memory Frequency (MHz)................1600
    Unable to do so - 10 multiplier is maximum, which gives me mem speed of 1333Mhz
    Performance Enhance (SPD)............. [Standard]
    DRAM Timing Selectable (SPD)............ [Quick] << Use Expert and set all channels one by one, I think quick causes issues because it sets RTL often the same which can be bad
    Profile DDR Voltage .................. 1.5V
    Profile QPI Voltage .................. 1.1V
    Channel Interleaving.....................[Auto] 4-6
    Rank Interleaving........................[Auto] 6
    Did you want me to change this to 6? When on Auto it defaults to 4.
    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[7-9]
    tRCD....................................[7-9]
    tRP.....................................[7-9]
    tRAS...................................[20-28]

    Since you are underclocking you should be able to do 777-20 or 888-20, start maybe with 888-20 for now

    >>>>> Advanced Timing Control

    tRC....................................[Auto]
    tRRD...................................[Auto]
    tWTR...................................[Auto]
    tWR....................................[Auto]
    tWTP...................................[Auto]
    tWL....................................[Auto]
    tRFC...................................[Auto] << Set 84-94
    tRTP...................................[Auto]
    tFAW...................................[Auto]
    Command Rate (CMD).................. 1 [Auto] << Set 1

    >>>>> Misc Timing Control

    B2B Cas Delay..........................[Auto]
    Round Trip Latency.....................[Auto]

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[Disabled]
    CPU Vcore..................1.25625V..[Auto] have tried up to 1.4V << Auto for now, you are trying to get stock stable right?
    Yes, not overclocked at all.
    QPI/VTT Voltage..........1.100v.....[Auto] have also tried up to 1.31V << this may need 1.24-1.45+, try 1.28-1.38 for now
    Have set this to 1.37V
    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto] have also tried up to 1.12 << may need 1.2-1.32
    CPU PLL......................1.800v.....[Auto] have also tried up to 1.92V Auto

    >>> DRAM
    DRAM Voltage..............1.500v.....[1.660v]
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Detect ....................[Disabled] NOT PRESENT IN MY BIOS << it is there, USB Storage Function in Integrated Peripherals page
    I've added feedback in bold above.

    I have entered all these settings (well, the ones that I can change - plz see my comments above), hit the reboot button and... Windows booted fine! However, getting strange errors at desktop now (Windows Live Messenger crashes at boot, but can be started later. Windows Media Player refuses to run at all.) Am going to run the SiSoft Sandra burn in and some games to see how she goes.

    Thanks for your guidance, fingers crossed!

  3. #23
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P55 UD4P regular BSOD and reboot when gaming

    Ahh sorry about a lot of that, I have not used i5 750 and was unaware of the locked Uncore and the max memory multi's.

    I will redo that for you with max memory speed you can use of 1333, unless you want to overclock your CPU otherwise you wont be able to run your ram any faster than that.

    "As noted above" Sorry, I just meant those same options are in the template twice, I need to edit it now that I am seeing/using it more often I see some changes are need to reduce repeating entries.

    CPU Clock Ratio 20x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[Auto]
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Disabled] – OPTION DOES NOT EXIST FOR I5 COU
    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Auto]
    Bi-Directional PROCHOT...................[Auto]

    QPI Clock Ratio..........................[Auto] << Manually set to x36
    QPI Link Speed........................[4.8GHz]
    Uncore Clock Ratio....................[24-26x] << Manually set to 24-26 (Sometimes +2 above ram speed is much smoother so try 26 first)
    This option is greyed out for me, so unable to change << yes sorry, locked on P55
    Uncore Frequency.........................

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto] << Manually set to 12 for now = 1600mhz
    I only have options of Auto, 6, 8, 10. Not 12. << Set x10
    Memory Frequency (MHz)................1333
    PCI Express Frequency (MHz)..............[Auto] << 100
    Did you want me to change this to manually run at 100MHz? << yes set 100 always.
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto] << All noted above
    All noted above? what do you mean? << Same as above settings, set it in one place and both are adjusted. Basically duplicate entries is all.

    Memory Frequency (MHz)................1333
    Unable to do so - 10 multiplier is maximum, which gives me mem speed of 1333Mhz << Sorry set x10

    Performance Enhance (SPD)............. [Standard]
    DRAM Timing Selectable (SPD)............ [Quick] << Use Expert and set all channels one by one, I think quick causes issues because it sets RTL often the same which can be bad
    Profile DDR Voltage .................. 1.5V
    Profile QPI Voltage .................. 1.1V

    Channel Interleaving.....................[Auto] 4-6
    Rank Interleaving........................[Auto] 6
    Did you want me to change this to 6? When on Auto it defaults to 4. << Yes 4-6 either will work, should anyway. You may leave both of these two here on auto if you like for now, they do not affect stability normally only performance
    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[7-9]
    tRCD....................................[7-9]
    tRP.....................................[7-9]
    tRAS...................................[20-28]

    Since you are underclocking you should be able to do 777-20 or 888-20, start maybe with 888-20 for now

    >>>>> Advanced Timing Control

    tRC....................................[Auto]
    tRRD...................................[Auto]
    tWTR...................................[Auto]
    tWR....................................[Auto]
    tWTP...................................[Auto]
    tWL....................................[Auto]
    tRFC...................................[Auto] << Set 84-94
    tRTP...................................[Auto]
    tFAW...................................[Auto]
    Command Rate (CMD).................. 1 [Auto] << Set 1

    >>>>> Misc Timing Control

    B2B Cas Delay..........................[Auto]
    Round Trip Latency.....................[Auto]

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[Disabled]
    CPU Vcore..................1.25625V..[Auto] have tried up to 1.4V << Auto for now, you are trying to get stock stable right?
    Yes, not overclocked at all.

    QPI/VTT Voltage..........1.100v.....[Auto] have also tried up to 1.31V << this may need 1.24-1.45+, try 1.28-1.38 for now
    Have set this to 1.37V

    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto] have also tried up to 1.12 << may need 1.2-1.32
    CPU PLL......................1.800v.....[Auto] have also tried up to 1.92V Auto

    >>> DRAM
    DRAM Voltage..............1.500v.....[1.660v]

  4. #24
    Join Date
    Nov 2009
    Location
    Sydney Australia
    Posts
    21

    Default Re: P55 UD4P regular BSOD and reboot when gaming

    A quick update - so far the random BSODs during reboot and at the desktop have stopped, which is great news! I haven't had a chance to try any games, as I've been busy, but will do over the next few days.

    There is definitely a hardware problem with the top 2 USB ports on the board though. Every time I plug a new device in there, the computer shuts down. And the last time I rebooted after this, the computer started literally screaming through the sound system, with a high-pitched loud noise. Was rather scary! I've left those two USB ports empty as a result.

  5. #25
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: P55 UD4P regular BSOD and reboot when gaming

    Quote Originally Posted by TechLad76 View Post
    A quick update - so far the random BSODs during reboot and at the desktop have stopped, which is great news! I haven't had a chance to try any games, as I've been busy, but will do over the next few days.

    There is definitely a hardware problem with the top 2 USB ports on the board though. Every time I plug a new device in there, the computer shuts down. And the last time I rebooted after this, the computer started literally screaming through the sound system, with a high-pitched loud noise. Was rather scary! I've left those two USB ports empty as a result.
    make sure you have both usb 2.0 and 1.0 i think enabled in bios maybe there 1.0 usb slots
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  6. #26
    Join Date
    Nov 2009
    Location
    Sydney Australia
    Posts
    21

    Default Re: P55 UD4P regular BSOD and reboot when gaming

    Even more good news - 30 minutes of Dragon Age, and an hour of L4D2 - and still no crashes! Thinking I'm going to reinstall Windows though, as certain components (Messenger, Media Player, Media Centre) appear to have been corrupted, and now don't work.

  7. #27
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P55 UD4P regular BSOD and reboot when gaming

    Great to hear you are more stable now! Good job tweaking things

    You could always perform a repair install instead of a clean install, if you are using XP that is. Then nothing would change except you would need to reinstall windows updates.

    About your USB Ports. Can you check to be sure nothing is shorting them out there on the board/tray or the I/O Shield? If not, you may need to test it out of the case and off the motherboard tray to be sure this way nothing could short it out. If you are worried about it that is

  8. #28
    Join Date
    Nov 2009
    Location
    Sydney Australia
    Posts
    21

    Default Re: P55 UD4P regular BSOD and reboot when gaming

    I'm running Windows 7 - I'm happy to do a full reinstall if it means everything starts working again

    I'm thinking I might take the motherboard out of the case to double check for shorts, as the USB issue is still quite worrying.

  9. #29
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P55 UD4P regular BSOD and reboot when gaming

    I agree, I would look into that myself too as it could lead to further damage if there is a short.

    If you do get it out of the case and run the board, be sure you set it on a wooden table or a cardboard box. And if you have cats make sure they cannot be around to shock your hardware.

    Good luck with the testing and reinstall if you decide to do that too! Post back and let us know how you get along

  10. #30
    Join Date
    Feb 2012
    Location
    Melbourne, Australia
    Posts
    9

    Default Re: P55 UD4P regular BSOD and reboot when gaming

    Hey guys

    Sorry to ressurect an old post, but I am also experiencing the same issue with random BSOD or reboots. I bought a newPC about 6 months ago, which I built myself:

    <o:p> </o:p>Gigabyte P55 UD4P
    G-skill 2GB DDR3 2200MHz ram x 4 (total of 8GB) running at 9,9,9,24
    Intel i5 750
    ATI Radeon 6850
    2 x Seagate 500GB SATA Drives running RAID0 for Windows
    2 x Seagate 1TB SATA Drives running RAID0 for storage
    Dell 2405FPW 24 monitor
    Windows 7 64-bit Home Edition
    Antek TruePower 650W PSU
    <o:p> </o:p>
    Initally it would only happen once every few weeks, but now it is happening every day, usually after about 20-60 mins into a game.

    Nothing is overclocked. I've used all the default bios settings. I have the latest video, sound, mobo and mouse drivers as well as the latest bios (F14). I have re-seated the RAM and GPU. The temps are about 44 degrees for the CPU and about 36 degrees for the PCH and GPU. I have no idea where to go from here and don't want to really buy a new mobo because this may not even fix the issue! I also do not feel confident messing with bios settings - this is a bit out of my league. Any ideas? I bought two sets of RAM (same part number) at different times, and in the bios it shows a different round trip latency for each channel - not sure if this makes a difference?

    Here are my bios settings:
    Advanced Frequency Settings:
    CPU Clock Ratio 20x
    Advanced Core Features [Press Enter]:
    Intel(R) Turbo Boost Tech................[Auto]
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[N/A]
    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Auto]
    Bi-Directional PROCHOT...................[Auto]
    QPI Clock Ratio..........................[Auto]
    QPI Link Speed........................[4.8GHz]
    Uncore Clock Ratio....................[16x]
    Uncore Frequency.........................2133MHz
    >>>>> Standard Clock Control <<<<<
    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto]
    Memory Frequency (MHz)................1333
    PCI Express Frequency (MHz)..............[Auto]
    C.I.A.2..................................[N/A]
    >>>>> Advanced Clock Control <<<<<
    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]
    Advanced Memory Settings:
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto]
    Memory Frequency (MHz)................1333
    Performance Enhance (SPD)............. [Turbo]
    DRAM Timing Selectable (SPD)............ [Auto]
    Profile DDR Voltage ..................1.5V
    Profile QPI Voltage ..................1.1V
    Channel Interleaving...................6..[Auto]
    Rank Interleaving......................4..[Auto]
    >>>>> Channel A & B
    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[9]
    tRCD....................................[9]
    tRP.....................................[9]
    tRAS...................................[24]
    >>>>> Advanced Timing Control
    tRC..................................33..[Auto]
    tRRD.................................4..[Auto]
    tWTR.................................5..[Auto]
    tWR..................................10..[Auto]
    tWTP.................................21..[Auto]
    tWL..................................7..[Auto]
    tRFC.................................74..[Auto]
    tRTP.................................5..[Auto]
    tFAW.................................20..[Auto]
    Command Rate (CMD).................. 2 [Auto]
    >>>>> Misc Timing Control
    B2B Cas Delay..........................[Auto]
    Round Trip Latency...................Channel A: 46, Channel B: 48 ..[Auto]
    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................[N/A]
    Different DIMMs........................[N/A]
    On The Same Rank.......................[N/A]
    >>>>> Channel A Writes Followed By Writes
    Different DIMMs........................[N/A]
    Different DIMMs........................[N/A]
    On The Same Rank.......................[N/A]

    Advanced Voltage Settings:
    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------
    >>> CPU
    Load Line Calibration...................[Auto]
    CPU Vcore..................1.200v....[Auto]
    QPI/VTT Voltage............1.100v....[Auto]
    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto]
    CPU PLL......................1.800v.....[Auto]
    >>> DRAM
    DRAM Voltage..............1.500v.....[Auto]
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]

    Miscellaneous Settings:[/SIZE]
    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Detect ....................[Enabled] Located In Integrated Peripherals Page

Page 3 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •