Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 8 FirstFirst ... 34567 ... LastLast
Results 41 to 50 of 79

Thread: Is my RAM set at its potential?




  1. #41
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  2. #42
    Join Date
    Jun 2008
    Location
    Illinois, Chicago Metropolitan Area
    Posts
    98

    Default Re: Is my RAM set at its potential?

    Alright boys, hope everyone had a good holiday. i sure did! back to tweaking!

    I enabled LLC, and re-ran IBT.

    Failed again after 2 runs. Gflops are higher this time tho.

    -Antec 900
    -Corsair 750TX Power Supply
    -GA-EP45-UD3P v1.0 w/ F6 bios
    -Q8200 Core 2 Quad Yorkfield @ 2.33GHz --> OCed to 3.2GHz Stable
    -Masscool Ice Cold 7WA001 HSF (30C idle, 57C full load)
    -EVGA GTX 260 896mb
    -OCZ Reaper HPC 2x2GB 1066 DDR2
    -WD Caviar Black 500GB 7200RPM (main)
    -WD Caviar Green 500GB 7200RPM (backup)
    -Win 7 Pro 64 bit

  3. #43
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Is my RAM set at its potential?

    Those are more like the GFlops I'd expect.
    Temps looks lower than before though, did you have both CoreTemp and RealTemp running at the time of test?

  4. #44
    Join Date
    Jun 2008
    Location
    Illinois, Chicago Metropolitan Area
    Posts
    98

    Default Re: Is my RAM set at its potential?

    temps are low cuz my comp is in the attic of my house and i just got back and didnt have heat on. its 16 degrees celcius in my room.

    and yea i was running both coretemp and realtemp. ive always used realtemp, but i just threw coretemp on to see how it was.
    -Antec 900
    -Corsair 750TX Power Supply
    -GA-EP45-UD3P v1.0 w/ F6 bios
    -Q8200 Core 2 Quad Yorkfield @ 2.33GHz --> OCed to 3.2GHz Stable
    -Masscool Ice Cold 7WA001 HSF (30C idle, 57C full load)
    -EVGA GTX 260 896mb
    -OCZ Reaper HPC 2x2GB 1066 DDR2
    -WD Caviar Black 500GB 7200RPM (main)
    -WD Caviar Green 500GB 7200RPM (backup)
    -Win 7 Pro 64 bit

  5. #45
    Join Date
    Jun 2008
    Location
    Illinois, Chicago Metropolitan Area
    Posts
    98

    Default Re: Is my RAM set at its potential?

    Well i realized in that last test i didnt set the stress level to maximum, but it doesnt matter cuz i just tested again after increasing Vcore to 1.3 and it failed...this is what i got

    in this pic my vcore is 1.3, LLC is enabled, and my VTT(cpu term) is 1.2v


    Shouldi increase Vcore some more? and try testing again?
    Last edited by FonduJack; 11-30-2009 at 11:39 AM.
    -Antec 900
    -Corsair 750TX Power Supply
    -GA-EP45-UD3P v1.0 w/ F6 bios
    -Q8200 Core 2 Quad Yorkfield @ 2.33GHz --> OCed to 3.2GHz Stable
    -Masscool Ice Cold 7WA001 HSF (30C idle, 57C full load)
    -EVGA GTX 260 896mb
    -OCZ Reaper HPC 2x2GB 1066 DDR2
    -WD Caviar Black 500GB 7200RPM (main)
    -WD Caviar Green 500GB 7200RPM (backup)
    -Win 7 Pro 64 bit

  6. #46
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Is my RAM set at its potential?

    Psycho101 had 1.26v VTT for 3.2GHz, try increasing VTT first.

  7. #47
    Join Date
    Jun 2008
    Location
    Illinois, Chicago Metropolitan Area
    Posts
    98

    Default Re: Is my RAM set at its potential?

    eww yuck.....

    this is with VTT at 1.26v, and Vcore at 1.3v, with LLC enabled.

    -Antec 900
    -Corsair 750TX Power Supply
    -GA-EP45-UD3P v1.0 w/ F6 bios
    -Q8200 Core 2 Quad Yorkfield @ 2.33GHz --> OCed to 3.2GHz Stable
    -Masscool Ice Cold 7WA001 HSF (30C idle, 57C full load)
    -EVGA GTX 260 896mb
    -OCZ Reaper HPC 2x2GB 1066 DDR2
    -WD Caviar Black 500GB 7200RPM (main)
    -WD Caviar Green 500GB 7200RPM (backup)
    -Win 7 Pro 64 bit

  8. #48
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: Is my RAM set at its potential?

    You'd be better off trying to raise VTT gradually. Try 1.22, 1.24, 1.26, 1.28 and 1.3. Pick the better of these (that lasts the most runs) then raise VCore again.

    If none improve, just revert back to 1.2V VTT for now and concentrate on Vcore.

    If raising Vcore to 1.35V with LL|C on doesn't do the trick, restore the current Vcore, set VTT to 1.2V, raise CPU Ref to 0.785V and try again, forst raising Vtt after testing 1.2V VTT and 0.785 CPU ref.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  9. #49
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Is my RAM set at its potential?

    MCH Ref adjustment would also help, this is key in P45. See my signature for how to properly adjust

  10. #50
    Join Date
    Jun 2008
    Location
    Illinois, Chicago Metropolitan Area
    Posts
    98

    Default Re: Is my RAM set at its potential?

    ill try with vtt back down at 1.22, and vcore still at 1.3v.
    -Antec 900
    -Corsair 750TX Power Supply
    -GA-EP45-UD3P v1.0 w/ F6 bios
    -Q8200 Core 2 Quad Yorkfield @ 2.33GHz --> OCed to 3.2GHz Stable
    -Masscool Ice Cold 7WA001 HSF (30C idle, 57C full load)
    -EVGA GTX 260 896mb
    -OCZ Reaper HPC 2x2GB 1066 DDR2
    -WD Caviar Black 500GB 7200RPM (main)
    -WD Caviar Green 500GB 7200RPM (backup)
    -Win 7 Pro 64 bit

Page 5 of 8 FirstFirst ... 34567 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •