Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 11 FirstFirst 1234 ... LastLast
Results 11 to 20 of 108

Thread: GA-P55 UD3 Cold boot BSOD problem




  1. #11
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    So, yesterday after being switched off all day (for about 15 hours), and powered off at the wall it booted perfectly. Then this morning (after being off for 8 hours, but still on at the wall) it did the blue screen. I can't really see a pattern, so am a bit stuck.

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Do not power it off at the wall or PSU.

    Other than that causing issues, you may just need to tweak your settings. If you think this may be the case (If you are using all Auto) please get a template from my signature and give me your full current settings and I will advise back

  3. #13
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    will do - thanks.

  4. #14
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    here we go:
    Advanced Frequency Settings:

    CPU Clock Ratio 20x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[enabled
    CPU Cores Enabled........................[All]

    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[disabled]
    Bi-Directional PROCHOT...................[Auto]

    QPI Clock Ratio..........................[Auto]
    QPI Link Speed........................[5.76ghz]
    Uncore Clock Ratio....................[16x]
    Uncore Frequency.........................2880MHz

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Enabled]
    BCLK Frequency ..........................[180]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[auto]
    Memory Frequency (MHz)................1333 1800
    PCI Express Frequency (MHz)..............[102]
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[auto]
    Memory Frequency (MHz)................1333 1800
    Performance Enhance (SPD)............. [Turbo]
    DRAM Timing Selectable (SPD)............ [auto]
    Profile DDR Voltage ..................1.5v
    Profile QPI Voltage ..................1.1v
    Channel Interleaving.....................[6 Auto]
    Rank Interleaving........................[4 Auto]

    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[9 auto]
    tRCD....................................[9 auto]
    tRP.....................................[9 auto]
    tRAS...................................[24 auto]

    >>>>> Advanced Timing Control

    tRC....................................[33 Auto]
    tRRD...................................[4 Auto]
    tWTR...................................[5 Auto]
    tWR....................................[10 Auto]
    tWTP...................................[21 Auto]
    tWL....................................[7 Auto]
    tRFC...................................[74 Auto]
    tRTP...................................[5 Auto]
    tFAW...................................[20 Auto]
    Command Rate (CMD).................. 1 [1 auto]

    >>>>> Misc Timing Control

    B2B Cas Delay..........................[- Auto]
    Round Trip Latency.....................[49 Auto]

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................[6 Auto]
    Different DIMMs........................[5 Auto]
    On The Same Rank.......................[1 Auto]

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs........................[6 Auto]
    Different DIMMs........................[6 Auto]
    On The Same Rank.......................[1 Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[auto]
    CPU Vcore..................1.28125v..[1.28125v]
    QPI/VTT Voltage..........1.100v.....[1270v]

    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto]
    CPU PLL......................1.800v.....[Auto]

    >>> DRAM
    DRAM Voltage..............1.500v.....[1.660v]
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    K, try these settings for a bit and see if things are any better

    CPU Clock Ratio 20x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[enabled
    CPU Cores Enabled........................[All]

    CPU Enhanced Halt (C1E)..................[Auto] << Disabled
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[disabled]
    Bi-Directional PROCHOT...................[Auto]

    QPI Clock Ratio..........................[Auto] << x36
    QPI Link Speed........................[5.76ghz]
    Uncore Clock Ratio....................[16x]
    Uncore Frequency.........................2880MHz

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Enabled]
    BCLK Frequency ..........................[180]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[auto] << x10
    Memory Frequency (MHz)................1333 1800
    PCI Express Frequency (MHz)..............[102] << Set 100 for now
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[auto] << Set to x10
    Memory Frequency (MHz)................1333 1800
    Performance Enhance (SPD)............. [Turbo] << Standard
    DRAM Timing Selectable (SPD)............ [auto] << Manual
    Profile DDR Voltage ..................1.5v
    Profile QPI Voltage ..................1.1v
    Channel Interleaving.....................[6 Auto]
    Rank Interleaving........................[4 Auto]

    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[9 auto] << Set 9
    tRCD....................................[9 auto] << Set 9
    tRP.....................................[9 auto] << Set 9
    tRAS...................................[24 auto] << Set 24

    >>>>> Advanced Timing Control

    tRC....................................[33 Auto]
    tRRD...................................[4 Auto]
    tWTR...................................[5 Auto]
    tWR....................................[10 Auto]
    tWTP...................................[21 Auto]
    tWL....................................[7 Auto]
    tRFC...................................[74 Auto]
    tRTP...................................[5 Auto]
    tFAW...................................[20 Auto]
    Command Rate (CMD).................. 1 [1 auto] << Set 1T

    >>>>> Misc Timing Control

    B2B Cas Delay..........................[- Auto]
    Round Trip Latency.....................[49 Auto]

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................[6 Auto]
    Different DIMMs........................[5 Auto]
    On The Same Rank.......................[1 Auto]

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs........................[6 Auto]
    Different DIMMs........................[6 Auto]
    On The Same Rank.......................[1 Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[auto] << Enabled, level 2 if level choice available
    CPU Vcore..................1.28125v..[1.28125v] << Bumpfor now to 1.3 or so
    QPI/VTT Voltage..........1.100v.....[1270v] << 1.3-1.38

    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto] << 1.1-1.2
    CPU PLL......................1.800v.....[Auto] << 1.84

    >>> DRAM
    DRAM Voltage..............1.500v.....[1.660v]

  6. #16
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Gave them a try and it didn't like something there - wouldn't post unfortunately.

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Try 1.68 Vdimm and 1.42 QPI then

    We may need to use 1600Mhz ram first to get you going, then go back up to 1800.

    You are setting the memory channels to match correct? Just checking as this can easily be overlooked

  8. #18
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    The sticker on the ram says 8-8-8-24, but I've never had luck with those settings. Will make the tweaks and report back, thanks.

  9. #19
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Ya I just noted 999-24 to get you going, 888-24 may require some tweaking after that.

    Good luck, don't let it frustrate you though!

  10. #20
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    no luck again i'm afraid - doesn't seem to get anywhere.

Page 2 of 11 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •