Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 11 FirstFirst ... 45678 ... LastLast
Results 51 to 60 of 108

Thread: GA-P55 UD3 Cold boot BSOD problem




  1. #51
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    well, back to the blue screen this morning. Just to confirm I can use the F6 bios on the p55-ud3? Is there a link anywhere?

  2. #52
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  3. #53
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    I think F6 was mentioned on a previous page, perhaps for a different board then?

    Error always seems to be 0x00000050

  4. #54
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Ya, it was likely for a different board.


    BSOD Error codes and what they mean:
    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage

    So maybe you are not using enough PCH or ram voltage, or you have a timing set incorrectly?

  5. #55
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Well, have gone back to basics - removed the overclock and manually set the RAM timings to 8-8-8-24 at 1.66 volts. Will see what happens in the morning.

  6. #56
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Ahh well sorry to hear that! Never give up, just keep tweaking and you will get it going!

  7. #57
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Well, had a successful boot today. If I have another tomorrow I'll apply a mild overclock, while keeping the correct RAM timings to see what happens. Thanks for all the help.

  8. #58
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Another little update - decided to run memtest with the correct ram timings and it gave hundreds of errors. Previously, with the timings on auto (or 9-9-9-24) I've got no errors. Odd??

    EDIT - upped the ram voltage to 1.68 and there are no longer any errors in memtest. Is 1.68 ok to go for? The packaging says 1.65, and I don't want to overdo things.
    Last edited by simongwynne; 12-10-2009 at 06:49 PM.

  9. #59
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Yes, that is fine to use as long as your QPI/Vtt amount it set within .5 of that (1.18-1.68). Meaning as long as you are not using less than 1.18 QPI/Vtt then it will be fine.

    You could try more QPI/Vtt instead, then lower your ram voltage back down to 1.66 and test again, this may have been what you really needed intead but maybe not? When you set 1.66, what do you see showing in Everest or in PC Health Section of the BIOS after a reboot? Could just be that 1.66 in your board/BIOS is actually 1.64 or less under load causing the issue

  10. #60
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    I'll check now!

Page 6 of 11 FirstFirst ... 45678 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •