Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 7 of 11 FirstFirst ... 56789 ... LastLast
Results 61 to 70 of 108

Thread: GA-P55 UD3 Cold boot BSOD problem




  1. #61
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    OK, qpi was definitely a bit low, so i've upped that to within .5, however I can't now recreate the memtest errors I was getting previously (and I was literally getting a hundred or so after a few seconds). Still, currently 8-8-8-24 at 1.66 volts (there's no option for 1.65), and no immediate memtest errors, so I'm not complaining. I'll see how the cold boot goes in the morning.

  2. #62
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Cool, let us know how your further testing goes and if you need anymore help.

    Good luck with the tweaking and testing!

  3. #63
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Didn't get a cold boot bsod in the morning (twice in a row - a record), but it did blue screen at some point this afternoon with a 0x000001A error, so I've upped the qpi a notch again. Will see how it goes tomorrow before trying an overclock.

  4. #64
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  5. #65
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Well, the last two mornings I've had 0x0000007E blue screens, so further tweaking is required.

  6. #66
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Well, let us have your settings and we can advise.

    Unless you are further tweaking yourself, if that is the case keep at it and let us know how things go and or if you need more help

  7. #67
    Join Date
    Dec 2009
    Location
    Europe
    Posts
    5

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Don't know if this helps anybody, but having problems with cold boot BSODs on a new system for a week now seems solved for me.

    System :
    GA-P55-UD3,
    Core i5 750,
    4 GB Ram,
    NVidia GTX 275,
    64 GB SATA SSD,
    SATA DVD,
    Windows 7.
    Bios f5 set to "optimized defaults".

    Symptom: Nearly Every cold boot ( 80%?) into Windows7 ended in a reset-like crash ( e.g. the machine behaved as if reset was pressed: black screen, and POST) or an A1 ( Memory Management) BSOD.

    Solution: In the Bios there was a floppy set to 1,44MB 3,5" while there was no floppy actually attached to the system...

    After setting this to "None" I had around 20 cold boots, restarts and S3 sleeps wihout a single BSOD or Reset.

    I know this sounds rather trivial ( compared to the settings that were already dicussed in this thread ), but may be worth a shot ...

    Hope this helps
    Eric

    Edit:
    Forget this advice. After 3 days without a single problem the system started to crash again ( 4x on cold boot and 3x during win7 BSOD 1A and 3B) this morning.
    This time I was able to log errors with memtest86+, so faulty RAM seems to be the root cause.
    However, the error is intermittent: 5 double passes of memtest went OK, the sixth boot/memtest showed the errors.
    Going for RMA for the RAM.
    However, another possibility would be a board/BIOS issue or possibly even the power unit...

    Bye
    Eric
    Last edited by EricM; 12-20-2009 at 08:29 AM. Reason: update of situation

  8. #68
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    worth a try, thanks!

  9. #69
    Join Date
    Dec 2009
    Location
    Brisbane, Australia
    Posts
    6

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Greetings from a fellow P55 UD3 user with cold boot bsod issues. I even tried the 1.44 floppy disable setting suggested with no success. BIOS flashed to F5. Latest drivers for gfx, audio.

    I think that the constant bsod's on EVERY cold boot have corrupted a file or two as some features of W7 no longer work so will be doing a reinstall of the OS this weekend. (LIVE Mail, Windows update and DirectX installations (tried this as well...) are the most obvious programmes responding with nasty messages.

    I am not an over-clocker and with my setup and the games I play (Crysis being the strongest demanding, Fallout 3, HL2 etc) I shouldn't need to OC. I just want a stable system on first boot.

    Memtest has been run fine on a warm boot but generates masses of errors on any cold-boot. I believe that there is a compatability problem with the default settings between the mobo and the ram but that is conjecture. All my ram is 1600MHz but the system sees it as 1333. It will/should still run fine but I am thinking that there may be voltage issues there somewhere.

    Any light you can shed or guidance you could provide would be massively appreciated.

    best regards
    Adski

    My system:
    - P55 UD3
    - I5 750
    - 8Gb 1600mhz GSkill Ripjaw mem
    - HD5850 1Gb gfx card
    - Win7 64 Pro
    - Xonar D2 audio
    - Seasonic M12D 750W psu
    - PC K62 case.

    My settings:

    Advanced Frequency Settings:
    CPU Clock Ratio 20x
    Advanced Core Features [Press Enter]:
    Intel(R) Turbo Boost Tech................AUTO
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Disabled]
    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Auto]
    Bi-Directional PROCHOT...................[Auto]
    QPI Clock Ratio..........................[Auto]
    QPI Link Speed........................[4.8GHz]
    Uncore Clock Ratio....................[16x]
    Uncore Frequency.........................2133MHz
    >>>>> Standard Clock Control <<<<<
    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[AUTO]
    Memory Frequency (MHz)................1333
    PCI Express Frequency (MHz)..............[Auto]
    C.I.A.2..................................[Disabled]
    >>>>> Advanced Clock Control <<<<<
    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]
    Advanced Memory Settings:
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[AUTO]
    Memory Frequency (MHz)................1333
    Performance Enhance (SPD)............. [Turbo]
    DRAM Timing Selectable (SPD)............ [AUTO]
    Profile DDR Voltage ..................1.5V
    Profile QPI Voltage ..................1.1V
    Channel Interleaving.....................[Auto]
    Rank Interleaving........................[Auto]
    >>>>> Channel A & B
    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[9]
    tRCD....................................[9]
    tRP.....................................[9]
    tRAS...................................[24]
    >>>>> Advanced Timing Control
    tRC....................................[Auto]
    tRRD...................................[Auto]
    tWTR...................................[Auto]
    tWR....................................[Auto]
    tWTP...................................[Auto]
    tWL....................................[Auto]
    tRFC...................................[Auto]
    tRTP...................................[Auto]
    tFAW...................................[Auto]
    Command Rate (CMD).................. 1 [AUTO]
    >>>>> Misc Timing Control
    B2B Cas Delay..........................[Auto]
    Round Trip Latency.....................[Auto]
    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]
    >>>>> Channel A Writes Followed By Writes
    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]

    Advanced Voltage Settings:
    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------
    >>> CPU
    Load Line Calibration...................[AUTO]
    CPU Vcore..................1.19375v..[AUTO]
    QPI/VTT Voltage..........1.100v.....[AUTO]
    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto]
    CPU PLL......................1.800v.....[Auto]
    >>> DRAM
    DRAM Voltage..............1.500v.....[AUTO]
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]

    Miscellaneous Settings:[/SIZE]
    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Detect ....................[Enabled]

  10. #70
    Join Date
    Oct 2009
    Posts
    36

    Default Re: GA-P55 UD3 Cold boot BSOD problem

    Looks like we have very similar systems, and probably the same RAM. Does indeed sound like an incompatibility issue.

Page 7 of 11 FirstFirst ... 56789 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •