Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 48

Thread: Memory Issues with EP43DS3L




  1. #1
    Join Date
    Dec 2008
    Posts
    67

    Default Memory Issues with EP43DS3L

    I recently bought a 4 gb patriot pc28500 1066mhz RAM but the system properties only show 3.31ghz 3.25GB of RAM..Is that normal?
    my timings are setup at 5-5-5-18 on the bios.

    please help with some bios settings for my RAM



    CPu: intel dual core e5200 OC to 3.31
    550 power supply
    9600gt GPU
    Sorry for this its been a while since I have posted in here I dont remember how to upload tinypics for the cpuz readouts sorry

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Memory Issues with EP43DS3L

    Quote Originally Posted by bathala View Post
    I recently bought a 4 gb patriot pc28500 1066mhz RAM but the system properties only show 3.31ghz 3.25GB of RAM..Is that normal?
    Yes it's normal for a 32 bit OS.

  3. #3
    Join Date
    Dec 2008
    Posts
    67

    Default Re: Memory Issues with EP43DS3L

    thanks thats good to know..
    Does anyone have advice on how to tweak the RAM using memset? (I can't seem to run that program.. 96ppp error) Please help and thanks in advance

    my mobo is a GA-ep43-DS3L
    the ram is Patriot Gamer Series 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Model PGS24G8500C7KC
    Sorry for the noobish behavior (cuz I am one)
    Last edited by bathala; 11-28-2009 at 11:07 AM.

  4. #4
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Memory Issues with EP43DS3L

    Can't run MemSet? What version?
    The error is given by the program or OS?

  5. #5
    Join Date
    Dec 2008
    Posts
    67

    Default Re: Memory Issues with EP43DS3L

    memset 4.1
    OS error says: you must use normal size 96ppp to use this software, you want change it office>right click>property>parameters>advanced>general. choose normal size.

    thats the error ty for help

  6. #6
    Join Date
    Dec 2008
    Posts
    67

    Default Re: Memory Issues with EP43DS3L

    i got it to work now just changed the dpi to normal.. Thanks now I gotta figure this out

  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Memory Issues with EP43DS3L

    All good? I just posted a reply to you with an image explaining this process in the Memory guide thread where you also asked >>
    http://forums.tweaktown.com/f69/memo...tml#post334274

  8. #8
    Join Date
    Dec 2008
    Posts
    67

    Default Re: Memory Issues with EP43DS3L

    Yes thanks
    Now I have questions about the readouts
    I set the timings to 5-5-5-18 on the bios (mobo GA-ep43ds3l) and trFC 53 with dram voltage to 1.900v .


    Anyways can you recommend any timings here? or am I limited to my OS? cuz my RAM is supposed to be 1066mhz pc2 8500 but the readout is different why?
    Sorry I ask too much I just wanna learn how from you guys here
    Patriot Gamer Series 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Model PGS24G8500C7KC
    Last edited by bathala; 11-29-2009 at 01:21 AM. Reason: extra info added

  9. #9
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Memory Issues with EP43DS3L

    Can you post full BIOS settings for this capture? You currently only running the memory as DDR-714.
    Use the template from this post or the one after.

  10. #10
    Join Date
    Dec 2008
    Posts
    67

    Default Re: Memory Issues with EP43DS3L

    here you go please help with some settings that you recommend for my setup

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 12x
    Fine CPU Clock Ratio.....................:.+.05
    CPU Frequency ...........................:3.35ghz(268x12.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 268Mhz
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<<
    MCH Clock Skew (ps)...................: <<<


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.66c
    Memory Frequency (Mhz) ..............: 800/715
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18

    Advanced Timing Control
    tRRD...........................................3 /4
    tWTR..........................................3/5
    tWR............................................6/6
    tRFC...........................................52/53
    tRTP...........................................3/5
    Command Rate (CMD) ....................:0/2

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control

    CPU
    CPU Vcore….……….........................:1.3125

    CPU Termination…..... 1.200V*.......: auto
    CPU PLL…………………....1.500V*.......: 1.500
    CPU Referen.…………....0.755V*.......: <<< .Auto

    CPU Reference2………,,0.800V*.......:< Auto Will set this correctly

    MCH/ICH
    MCH Core…………….....1.100V...........: << auto
    MCH Reference….…….0.760V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 1.900
    DRAM Termination .…0.900V............: <<< leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

Page 1 of 5 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •