Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: GA-ex58-UD5 and i7920-D0 - The quest for maximum clock!




  1. #1
    Join Date
    Oct 2009
    Location
    Bristol
    Posts
    16

    Default GA-ex58-UD5 and i7920-D0 - The quest for maximum clock!

    Hi there,

    I posted in another thread earlier but thought I'd create my own ;)

    Settings are as follows:

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... x16
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 205
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8.0]
    DRAM Timing Selectable (SPD) .......... [Quick]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 8
    tRCD .......................................  8
    tRP .........................................  8
    tRAS .......................................  20
    CMD Rate..................................  2
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... 1.52500v
    QPI/VTT Voltage 1.150v ............1.615v
    CPU PLL 1.800v .......................1.860v
    
    MCH/ICH
    PCIE 1.500v ...........................1.540v
    QPI PLL 1.100v .......................1.540v
    IOH Core 1.100v .....................1.300v
    ICH I/O 1.500v .......................1.580v
    ICH Core 1.1v ........................1.440v
    
    DRAM
    DRAM Voltage 1.500v ..............1.680v
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Obviously voltages are high but this seems the only way I can get anywhere near Linx stable, this is with 12GB of G.Skill 2000MHz C9 Ram.

    I'm not too fussed about running the ram below spec, but I do feel I should be able to get more speed with the voltages I'm having to use. BIOS is F9e.

    Any pointers?

  2. #2
    Join Date
    Oct 2009
    Location
    Bristol
    Posts
    16

    Default Re: GA-ex58-UD5 and i7920-D0 - The quest for maximum clock!

    Hm, Just updated to the latest betabios listed here.

    I'm getting bluescreens with a 0x0000009C error.

    Any ideas?

  3. #3
    Join Date
    Oct 2009
    Location
    Bristol
    Posts
    16

    Default Re: GA-ex58-UD5 and i7920-D0 - The quest for maximum clock!

    Oops, that was down to vCore after updating bios and not setting it to what it should have been!

    Seems getting over 4.2 requires that you REALLY crank the vCore...

  4. #4
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-ex58-UD5 and i7920-D0 - The quest for maximum clock!

    <a href="http://tinypic.com" target="_blank"><img src="http://i49.tinypic.com/oig31c.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

    <a href="http://tinypic.com" target="_blank"><img src="http://i48.tinypic.com/zl57wl.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

    <a href="http://tinypic.com" target="_blank"><img src="http://i49.tinypic.com/2q1gnx0.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

    you shouldnt need that much vcore with a d0 have you tried with just 6gb of ram??
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-ex58-UD5 and i7920-D0 - The quest for maximum clock!

    You may have better luck with x18 uncore and less QPI PLL

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •