Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: I7 on X58A-UD7 help




  1. #1
    Join Date
    Nov 2008
    Posts
    56

    Default I7 on X58A-UD7 help

    Hey
    This build is working better than the other one which I'm still trying to fix.
    I want the i7 to be around 4GHZ+
    The current settings I'm using atm are below, there's a lot of new setting which i'm not familar with since it a load of new settings, which is also why most of them are on 'Auto'
    The below settings work on normal use (been on for 25hrs) but fails prime after 5hours however I could fix the problem by increasing the Vcore but I'm not sure whether other voltages could improve the stability.

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [21 ]
    Intel(R) Turbo Boost Tech ...................... [Enable]
    CPU Cores Enabled .............................. [All]
    CPU Multi Threading .............................[Enable]
    CPU Enhanced Halt (C1E) ........................ [Disable]
    C3/C6/C7 State Support ......................... [Disable]
    CPU Thermal Monitor ............................ [Disable]
    CPU EIST Function .............................. [Disable]
    Virtualization Technology ...................... [Enable]
    Bi-Directional PROCHOT ......................... [Enable]
    
    Uncore & QPI Features:
    QPI Link Speed ..............................[6.91]
    Uncore Frequency ............................[3840]
    Isonchronous Frequency ......................[Enable]
    
    Standard Clock Control:
    Base Clock (BCLK) Control .......................... [Enable]
    BCLK Frequency (MHz) ................................[192]
    PCI Express Frequency (MHz) ........................ [AUTO]
    C.I.A.2........................................... .. [-]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800]
    PCI Express Clock Drive ................... [900]
    CPU Clock Skew ............................. [0]
    IOH Clock Skew ............................. [0]
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ........... [Disable]
    System Memory Multiplier (SPD) ........... [ 10]
    DRAM Timing Selectable (SPD) ............. [Quick]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................[7]
    tRCD ..................................[8]
    tRP ...................................[7]
    tRAS ..................................[20]
    CR.....................................[AUTO]
    B2B.....................................[-]
    
    
    Advanced Voltage Control:
    CPU Intel Core i7 920 D0 Stepping
    Load Line Calibration ................. [Standard]
    CPU Vcore ..............................[1.35000]
    QPI/VTT Voltage 1.150v .................[AUTO]
    CPU PLL 1.800v .........................[AUTO]
    PCIE 1.500v ...........................[AUTO]
    QPI PLL 1.100v ........................[AUTO]
    IOH Core 1.100v .......................[AUTO]
    ICH I/O 1.500v ........................[AUTO]
    ICH Core 1.1v .........................[AUTO]
    
    DRAM
    DRAM Voltage 1.500v .............. [1.64]
    DRAM Termination 0.750v.......... [AUTO]
    Ch-A Data VRef. 0.750v ...........[AUTO]
    Ch-B Data VRef. 0.750v ...........[AUTO]
    Ch-C Data VRef. 0.750v ...........[AUTO]
    Ch-A Address VRef. 0.750v ........[AUTO]
    Ch-B Address VRef. 0.750v ........[AUTO]
    Ch-C Address VRef. 0.750v ........[AUTO]
    Thanks

    Edit:
    My specs are:
    X58A-UD7
    i7 920 D0
    6GB Corsair Dominator GT PC3-15000C7
    Nvidia GTX260 (will be changing to another 260 soon - got my reasons :P)
    Corsair TX950

    Windows 7 x64
    Last edited by Leungwk01; 12-06-2009 at 09:26 AM.
    Gigabyte EP35C-DS3R
    Intel core 2 quad Q6600 OC@3.2GHz
    Nvidia GTX 260
    6GB OCZ DDR2 PC2 6400
    850W BFG PSU (will replace to corsair 850 later)
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Corsair 64GB X64 SSD
    WD 1TB HD
    Antec 1200
    Arctic freezer 7

    Windows 7 x64

  2. #2
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: I7 on X58A-UD7 help

    you wanna try setting performance enhance to standard and set qpi voltage to 1.35000 and test with prime95 blend test if blue screen raise qpi a little....auto will always over volt
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #3
    Join Date
    Nov 2008
    Posts
    56

    Default Re: I7 on X58A-UD7 help

    Got blue screen on 1.3555
    Will slowly raise and update tomorrow since its getting late here. (technically early - GMT)
    Gigabyte EP35C-DS3R
    Intel core 2 quad Q6600 OC@3.2GHz
    Nvidia GTX 260
    6GB OCZ DDR2 PC2 6400
    850W BFG PSU (will replace to corsair 850 later)
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Corsair 64GB X64 SSD
    WD 1TB HD
    Antec 1200
    Arctic freezer 7

    Windows 7 x64

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: I7 on X58A-UD7 help

    If you get BSOD's this may help

    BSOD Error codes and what they mean:
    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage

    If you need more help please give us your full specs and a link to your ram, template to do so is in my signature

  5. #5
    Join Date
    Nov 2008
    Posts
    56

    Default Re: I7 on X58A-UD7 help

    X58A-UD7
    i7 920 D0
    6GB Corsair Dominator GT PC3-15000C7
    http://www.overclockers.co.uk/showpr...odid=MY-200-CS
    Nvidia GTX260 (will be changing to another 260 soon - got my reasons :P)
    Corsair TX950


    Advanced CPU Features:
    CPU Clock Ratio ................................ [21 ]
    Intel(R) Turbo Boost Tech ...................... [Enable]
    CPU Cores Enabled .............................. [All]
    CPU Multi Threading .............................[Enable]
    CPU Enhanced Halt (C1E) ........................ [Disable]
    C3/C6/C7 State Support ......................... [Disable]
    CPU Thermal Monitor ............................ [Disable]
    CPU EIST Function .............................. [Disable]
    Virtualization Technology ...................... [Enable]
    Bi-Directional PROCHOT ......................... [Enable]

    Uncore & QPI Features:
    QPI Link Speed ..............................[6.91]
    Uncore Frequency ............................[3456]
    Isonchronous Frequency ......................[Enable]

    Standard Clock Control:
    Base Clock (BCLK) Control .......................... [Enable]
    BCLK Frequency (MHz) ................................[192]
    PCI Express Frequency (MHz) ........................ [AUTO]
    C.I.A.2........................................... .. [-]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800]
    PCI Express Clock Drive ................... [900]
    CPU Clock Skew ............................. [0]
    IOH Clock Skew ............................. [0]
    [/code]
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ........... [Disable]
    System Memory Multiplier (SPD) ........... [ 8]
    DRAM Timing Selectable (SPD) ............. [Quick]

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................[7]
    tRCD ..................................[8]
    tRP ...................................[7]
    tRAS ..................................[20]
    CR.....................................[AUTO]
    B2B.....................................[-]


    Advanced Voltage Control:
    CPU Intel Core i7 920 D0 Stepping
    Load Line Calibration ................. [Standard]
    CPU Vcore ..............................[1.33125]
    QPI/VTT Voltage 1.150v .................[1.295]
    CPU PLL 1.800v .........................[AUTO]
    PCIE 1.500v ...........................[AUTO]
    QPI PLL 1.100v ........................[AUTO]
    IOH Core 1.100v .......................[AUTO]
    ICH I/O 1.500v ........................[AUTO]
    ICH Core 1.1v .........................[AUTO]

    DRAM
    DRAM Voltage 1.500v .............. [1.64]
    DRAM Termination 0.750v.......... [AUTO]
    Last edited by Leungwk01; 12-07-2009 at 02:31 AM.
    Gigabyte EP35C-DS3R
    Intel core 2 quad Q6600 OC@3.2GHz
    Nvidia GTX 260
    6GB OCZ DDR2 PC2 6400
    850W BFG PSU (will replace to corsair 850 later)
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Corsair 64GB X64 SSD
    WD 1TB HD
    Antec 1200
    Arctic freezer 7

    Windows 7 x64

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: I7 on X58A-UD7 help

    Thanks, try these adjustments >>

    Advanced CPU Features:
    CPU Clock Ratio ................................ [21 ]
    Intel(R) Turbo Boost Tech ...................... [Enable]
    CPU Cores Enabled .............................. [All]
    CPU Multi Threading .............................[Enable]
    CPU Enhanced Halt (C1E) ........................ [Disable]
    C3/C6/C7 State Support ......................... [Disable]
    CPU Thermal Monitor ............................ [Disable] << Enable!
    CPU EIST Function .............................. [Disable]
    Virtualization Technology ...................... [Enable]
    Bi-Directional PROCHOT ......................... [Enable]

    Uncore & QPI Features:
    QPI Link Speed ..............................[6.91] << Set x36 manually
    Uncore Frequency ............................[3456] << Set manually to x16 or x18
    Isonchronous Frequency ......................[Enable]

    Standard Clock Control:
    Base Clock (BCLK) Control .......................... [Enable]
    BCLK Frequency (MHz) ................................[192]
    PCI Express Frequency (MHz) ........................ [AUTO]
    C.I.A.2........................................... .. [-] << Disabled

    Advanced Clock Control:
    CPU Clock Drive ..............................[800]
    PCI Express Clock Drive ................... [900]
    CPU Clock Skew ............................. [0]
    IOH Clock Skew ............................. [0]

    Advanced DRAM Features:
    Performance Enhance ...................... [Standard] << Do try out turbo and Extreme, sometimes this actually helps now with P55/X58
    Extreme Memory Profile (X.M.P) ........... [Disable]
    System Memory Multiplier (SPD) ........... [ 8]
    DRAM Timing Selectable (SPD) ............. [Quick] << Use Expert and set each channel manually

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................[7]
    tRCD ..................................[8]
    tRP ...................................[7]
    tRAS ..................................[20]
    CR.....................................[AUTO] << Set 1T
    B2B.....................................[-]


    Advanced Voltage Control:
    CPU Intel Core i7 920 D0 Stepping
    Load Line Calibration ................. [Standard] << Enabled
    CPU Vcore ..............................[1.33125] << May need a bit more. What BSOD Codes are you getting anyway?
    QPI/VTT Voltage 1.150v .................[1.295] << Try 1.35-1.42
    CPU PLL 1.800v .........................[AUTO] << Set 1.84
    PCIE 1.500v ...........................[AUTO] << Set 1.5-1.56
    QPI PLL 1.100v ........................[AUTO] << Set 1.2-1.24
    IOH Core 1.100v .......................[AUTO] << Set 1.2-1.24
    ICH I/O 1.500v ........................[AUTO] << Set 1.5
    ICH Core 1.1v .........................[AUTO] << Set 1.14-1.2

    DRAM
    DRAM Voltage 1.500v .............. [1.64] << Set 1.66
    DRAM Termination 0.750v.......... [AUTO]

  7. #7
    Join Date
    Nov 2008
    Posts
    56

    Default Re: I7 on X58A-UD7 help

    The BIOS code which I got wasn't the one you stated however some were but I raised the Vcore abit and another code was prompt.

    I'll post the code when I used the settings above.

    Also isn't it recommended to have QPI/VTT at 1.35 max?
    Gigabyte EP35C-DS3R
    Intel core 2 quad Q6600 OC@3.2GHz
    Nvidia GTX 260
    6GB OCZ DDR2 PC2 6400
    850W BFG PSU (will replace to corsair 850 later)
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Corsair 64GB X64 SSD
    WD 1TB HD
    Antec 1200
    Arctic freezer 7

    Windows 7 x64

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  9. #9
    Join Date
    Nov 2008
    Posts
    56

    Default Re: I7 on X58A-UD7 help

    Prime ran for 2hr before getting the BSoD. Code was 0x0000003b..
    So I'm guessing this is related to RAM/driver problem?

    Raising the Vcore don't seem to be the problem since I raised it a bit more to test and it BSoD a bit quicker.
    Gigabyte EP35C-DS3R
    Intel core 2 quad Q6600 OC@3.2GHz
    Nvidia GTX 260
    6GB OCZ DDR2 PC2 6400
    850W BFG PSU (will replace to corsair 850 later)
    Creative Sound Blaster X-Fi Titanium Fatal1ty Champion
    Corsair 64GB X64 SSD
    WD 1TB HD
    Antec 1200
    Arctic freezer 7

    Windows 7 x64

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: I7 on X58A-UD7 help

    Could be a driver, was one mentioned on the screen like Nvidia or ATI Related?

    Which Uncore Multi was you using? If x16, try x18 and more QPI/Vtt

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •