Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Random reboots with ga-p55-ud2 rev 1




  1. #1
    Join Date
    Dec 2009
    Location
    USA
    Posts
    8

    Default Random reboots with ga-p55-ud2 rev 1

    Hi, new to the forum and looking for assistance.

    I have a new pc with windows 7 64 bit that is blue screening and then rebooting at randoms times. I have a ga-p55m-ud2 motherboard with 2x2gb of adata ram ad3u1333b2g9-b CL value= 9.

    I flashed bios from version 3 to version 6 and re-installed the OS and still having same issue. I have ran memtest and windows memory diagnostics but both came back with no errors.

    Ram is recognized in bios and seems to have all the correct settings. I know the ram is not on the gigabyte tested list for this motherboard but it was purchased from a vendor so I don't know if I have an option to rma it or not.

    These are the last couple of error messages prior to reboot:

    The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000041287, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000).

    The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000005002, 0xfffff70001080000, 0x0000000000004b35, 0x03006b4efffffffe).

    The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000005002, 0xfffff70001080000, 0x0000000000001438, 0xaf001439fffffffe

    Any thoughts would be appreciated.

    Thanks
    Last edited by Emiliam; 12-07-2009 at 02:08 AM. Reason: add information

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Random reboots with ga-p55-ud2 rev 1

    Are you setting your own Ram voltages? You need to

    Can you post me a link to your memory? If not I can look it up later when I get back.

    Give me your full settings and I will advise back, template to do that is linked in my signature

  3. #3
    Join Date
    Dec 2009
    Location
    USA
    Posts
    8

    Default Re: Random reboots with ga-p55-ud2 rev 1

    http://www.adata-group.com/US/produc...uctNo=AD31333U

    I'm not setting my own voltages. I will get bios settings shortly.

    Thanks

  4. #4
    Join Date
    Dec 2009
    Location
    USA
    Posts
    8

    Default Re: Random reboots with ga-p55-ud2 rev 1

    Here are bios settings:

    Advanced Frequency Settings:

    CPU Clock Ratio 21x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[Auto]
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Enabled]
    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Auto]
    Bi-Directional PROCHOT...................[Auto]

    QPI Clock Ratio..........................[Auto]
    QPI Link Speed........................[4.8]
    Uncore Clock Ratio....................[18x]
    Uncore Frequency.........................2400MHz

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto]
    Memory Frequency (MHz)................1333
    PCI Express Frequency (MHz)..............[Auto]
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto]
    Memory Frequency (MHz)................1333
    Performance Enhance (SPD)............. [Turbo]
    DRAM Timing Selectable (SPD)............ [Auto]
    Profile DDR Voltage ..................1.5v
    Profile QPI Voltage ..................1.1v
    Channel Interleaving..................... 6 [Auto]
    Rank Interleaving........................4 [Auto]

    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................9[Auto]
    tRCD....................................9[Auto]
    tRP.....................................9[Auto]
    tRAS...................................24[Auto]

    >>>>> Advanced Timing Control

    tRC....................................33[Auto]
    tRRD...................................4[Auto]
    tWTR...................................5[Auto]
    tWR....................................10[Auto]
    tWTP...................................21[Auto]
    tWL....................................7[Auto]
    tRFC...................................74[Auto]
    tRTP...................................5[Auto]
    tFAW...................................20[Auto]
    Command Rate (CMD).................. 1 [Auto]

    >>>>> Misc Timing Control

    B2B Cas Delay..........................[Auto]
    Round Trip Latency.....................52[Auto]

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................6[Auto]
    Different DIMMs........................5[Auto]
    On The Same Rank.......................1[Auto]

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs........................6[Auto]
    Different DIMMs........................6[Auto]
    On The Same Rank.......................1[Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[Auto]
    CPU Vcore..................1.18125v..[Auto]
    QPI/VTT Voltage..........1.100v.....[Auto]

    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto]
    CPU PLL......................1.800v.....[Auto]

    >>> DRAM
    DRAM Voltage..............1.500v.....[Auto]
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Funtion ....................[Enabled] Located In Integrated Peripherals Page

  5. #5
    Join Date
    Dec 2009
    Location
    USA
    Posts
    8

    Default Re: Random reboots with ga-p55-ud2 rev 1

    Ok, any recommendations on what I should set voltages at?

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Random reboots with ga-p55-ud2 rev 1

    Try these >>>
    CPU Clock Ratio 21x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[Auto]
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Enabled]
    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Auto]
    Bi-Directional PROCHOT...................[Auto]

    QPI Clock Ratio..........................[Auto]
    QPI Link Speed........................[4.8]
    Uncore Clock Ratio....................[18x]
    Uncore Frequency.........................2400MHz

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto] << 10x
    Memory Frequency (MHz)................1333
    PCI Express Frequency (MHz)..............[Auto]
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto] << Set 10x manually
    Memory Frequency (MHz)................1333
    Performance Enhance (SPD)............. [Turbo] << Try standard here, but do also try leaving this first as I see turbo helps in some boards
    DRAM Timing Selectable (SPD)............ [Auto]
    Profile DDR Voltage ..................1.5v
    Profile QPI Voltage ..................1.1v
    Channel Interleaving..................... 6 [Auto]
    Rank Interleaving........................4 [Auto]

    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................9[Auto]
    tRCD....................................9[Auto]
    tRP.....................................9[Auto]
    tRAS...................................24[Auto]

    >>>>> Advanced Timing Control

    tRC....................................33[Auto]
    tRRD...................................4[Auto]
    tWTR...................................5[Auto]
    tWR....................................10[Auto]
    tWTP...................................21[Auto]
    tWL....................................7[Auto]
    tRFC...................................74[Auto]
    tRTP...................................5[Auto]
    tFAW...................................20[Auto]
    Command Rate (CMD).................. 1 [Auto]

    >>>>> Misc Timing Control

    B2B Cas Delay..........................[Auto]
    Round Trip Latency.....................52[Auto]

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................6[Auto]
    Different DIMMs........................5[Auto]
    On The Same Rank.......................1[Auto]

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs........................6[Auto]
    Different DIMMs........................6[Auto]
    On The Same Rank.......................1[Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[Auto]
    CPU Vcore..................1.18125v..[Auto]
    QPI/VTT Voltage..........1.100v.....[Auto]

    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto] << try 1.1-1.15 (1.1 or auto may be fine, just try last if nothing else helps)
    CPU PLL......................1.800v.....[Auto]

    >>> DRAM
    DRAM Voltage..............1.500v.....[Auto] << Set 1.55-1.6
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Funtion ....................[Enabled] << Disable for now just to be sure

  7. #7
    Join Date
    Dec 2009
    Location
    USA
    Posts
    8

    Default Re: Random reboots with ga-p55-ud2 rev 1

    Ok, I've changed all settings suggested except Performance Enhance (SPD). I left it at Turbo. I thought all was well but this afternoon I had 2 bluescreens within 30 minutes apart. One happened when I was copying data from another pc and it just locked up while copying.

    Both bluescreens had same error:
    STOP 0x0000000A (IRQL_NOT_LESS_OR_EQUAL)

    Not sure what it could be at this point. I have update NIC driver from gigabyte site.

    cpu: core i7 860

  8. #8
    Join Date
    Dec 2009
    Location
    USA
    Posts
    8

    Default Re: Random reboots with ga-p55-ud2 rev 1

    PC was purchased from Ibuypower. I went to their forum and there are 3 or 4 people with same model and exact same issues. Hopefully there is a solution to this issue.

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Random reboots with ga-p55-ud2 rev 1

    Please try Performance Enhance Standard and Extreme

    Also, sorry I did not mention before, maybe because of the slow ram speed?, please try 1.2-1.25 QPI/Vtt

  10. #10
    Join Date
    Dec 2009
    Location
    New England, US
    Posts
    1

    Default Re: Random reboots with ga-p55-ud2 rev 1

    Emiliam - I have the same mobo and memory (only 2x2gb) - and had the same problem! I called iBuyPower tech support. Their suggestion was to test 1 stick at a time in each slot. After lots of *successful* memory tests, one of the sticks finally failed consistently. I've been running on 2gb, waiting for two new DIMMs on the way (RMA). I'll test those, keep two and return two (one of which is *known* to be bad.)

    Note - the mobo PDF says to use "DDR3_1 or DDR3_3 socket if only installing ONE DDR3 module"... I couldn't get the machine to boot with one stick in either of the other two sockets (DDR3_2 and DDR3_4 - those are the blue ones, with DDR3_2 being closest to the CPU.) From the CPU, they are labeled 2,1,4,3... That should save you some time when testing.

    Also of note, I had purchased 2x2gb of G.Skill, thinking I could simply add it (as in the "old days") - now I know better. The interesting thing is that I read it's best to SET the timings (vs "auto") so I updated those. The NEW memory did not work (kept crashing) until I changed the RATE to 2. (The new sticks are 8-8-8-24-2N) Since these are working fine, I plan to purchase 4 more Gb of G.Skill so a 4 DIMMs will be the same. Let me know if you can't RMA the A-Data - I'll have 2 known good ones on hand!
    Last edited by suzbwise; 12-16-2009 at 09:20 AM. Reason: updated 'brand' to 'G.Skill'

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •