Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: TEMPLATE for 4.27GHz EP45-UD3p




  1. #1
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default TEMPLATE for 4.27GHz EP45-UD3p

    I can't find the Template I used for running 4.27GHz.Here is a Template I kind of remember some of the settings but I ended up getting a BSOD.I also tried few different combinations with no success.I've run 4.0GHz for 3 months with no BSOD's.I'm going to start building a I7 Rig next month - So I would like to see what this Rig will do before I sell it to my Brother.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ................:Turbo
    CPU Clock Ratio ........................:9
    Fine CPU Clock Ratio....................:+0.5
    CPU Frequency ..........................:4275 MHz
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................:Enabled
    CPU Host Frequency (Mhz) ...............:450 MHz
    PCI Express Frequency (Mhz) ............:100
    C.I.A.2 ................................:Disabled
    Advanced Clock Control [Press Enter]
    CPU Clock Drive.........................:800mv
    PCI Express Clock Drive.................:900mv
    CPU Clock Skew (ps).....................:0ps
    MCH Clock Skew (ps).....................:0ps
    DRAM Performance Control
    Performance Enhance.....................:Standard
    Extreme Memory Profile (X.M.P.).........:Disabled
    (G)MCH Frequency Latch..................:Auto
    System Memory Multiplier ...............:2.40B
    Memory Frequency (Mhz) .................:1080 MHz
    DRAM Timing Selectable .................:Manual
    Standard Timing Control
    CAS Latency Time........................:5
    tRCD ...................................:5
    tRP'....................................:5
    tRAS....................................:18
    Advanced Timing Control
    tRRD....................................:5
    tWTR....................................:8
    tWR.....................................:10
    tRFC....................................:85
    tRTP....................................:8
    Command Rate (CMD) .....................:2
    Driving Strength Profiles
    Driving Strength .......................:1066
    Channel A
    Static tRead Value......................:8
    tRD Phase0 Adjustment..................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)..................:Auto
    Twr2wr(Different Rank)..................:Auto
    Twr2rd(Different Rank)..................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control................:Auto ps
    Dimm2 Clock Skew Control................:Auto ps
    Channel B
    Static tRead Value......................:8
    tRD Phase0 Adjustment..................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)..................:Auto
    Twr2wr(Different Rank)..................:Auto
    Twr2rd(Different Rank)..................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control................:Auto ps
    Dimm2 Clock Skew Control................:Auto ps
    Motherboard Voltage Control
    CPU
    Load-Line Calibration...................:Enabled
    CPU Vcore….………..........................:1.25
    CPU Termination…..... 1.200V*...........:1.24
    CPU PLL…………………....1.500V*...............:1.5
    CPU Referen.…………....0.755V*.............:Auto
    CPU Reference2………,,0.800V*..............:
    MCH/ICH
    MCH Core…………….....1.100V................:1.24
    MCH Reference….…….0.760V................:Auto
    MCH/DRAM Ref.…......0.900V..............:Auto
    ICH I/O……………….....1.500V................:1.5
    ICH Core…………...……1.100V.................:1.2
    DRAM
    DRAM Voltage ……....1.800V...............:2.0
    DRAM Termination .…0.900V...............:Normal
    Channel A Reference 0.900V..............:Normal
    Channel B Reference 0.900V..............:Normal
    Advanced Settings
    Limit CPUID Max. to 3...................:Disabled
    No-Execute Memory Protect...............:Enabled
    CPU Enhanced Halt (C1E).................:Disabled
    C2/C2E State Support....................:Didabled
    x C4/C4E State Support..................:Disabled
    CPU Thermal Monitor 2(TM2) .............:Enabled
    CPU EIST Function.......................:Disabled
    Virtualization Technology...............:Disabled
    Integrated Peripherals
    Legacy USB Storage Detect ..............:Disabled
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  3. #3
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: TEMPLATE for 4.27GHz EP45-UD3p

    I need help !!! I've can't find the correct settings for my BIOS.Every time I set the BIOS - it will reboot - it will start loading information - then reboots.Then it says I'm running 3.1GHz.I go back into BIOS and it has a message written in RED - says it shut down my computer becuse of overclocking voltages.I made it to main page a couple times - but ended up with a BSOD.I've run at 4.27 before but not sure if it was stable.Any help would be appreciated.
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: TEMPLATE for 4.27GHz EP45-UD3p

    Can you get 4Ghz stable? Just wonder why you are asking about 4.27.

    Anyway, try these changes and see how you get along

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ................:Turbo
    CPU Clock Ratio ........................:9
    Fine CPU Clock Ratio....................:+0.5
    CPU Frequency ..........................:4275 MHz

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................:Enabled
    CPU Host Frequency (Mhz) ...............:450 MHz
    PCI Express Frequency (Mhz) ............:100
    C.I.A.2 ................................:Disabled

    Advanced Clock Control [Press Enter]
    CPU Clock Drive.........................:800mv
    PCI Express Clock Drive.................:900mv
    CPU Clock Skew (ps).....................:0ps
    MCH Clock Skew (ps).....................:0ps

    DRAM Performance Control
    Performance Enhance.....................:Standard
    Extreme Memory Profile (X.M.P.).........:Disabled
    (G)MCH Frequency Latch..................:Auto
    System Memory Multiplier ...............:2.40B << you will have better luck with 2.00D

    Memory Frequency (Mhz) .................:1080 MHz
    DRAM Timing Selectable .................:Manual

    Standard Timing Control
    CAS Latency Time........................:5
    tRCD ...................................:5
    tRP'....................................:5
    tRAS....................................:18

    Advanced Timing Control
    tRRD....................................:3-4
    tWTR....................................:4-8
    tWR.....................................:5-10
    tRFC....................................:72-82
    tRTP....................................:4-5
    Command Rate (CMD) .....................:2

    Driving Strength Profiles
    Driving Strength .......................:1066

    Channel A
    Static tRead Value......................:8 << Set this to 9 for now
    tRD Phase0 Adjustment..................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)..................:Auto
    Twr2wr(Different Rank)..................:Auto
    Twr2rd(Different Rank)..................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control................:Auto ps
    Dimm2 Clock Skew Control................:Auto ps

    Channel B
    Static tRead Value......................:8 << Set this to 9 for now
    tRD Phase0 Adjustment..................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)..................:Auto
    Twr2wr(Different Rank)..................:Auto
    Twr2rd(Different Rank)..................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control................:Auto ps
    Dimm2 Clock Skew Control................:Auto ps

    Motherboard Voltage Control
    CPU
    Load-Line Calibration...................:Enabled
    CPU Vcore….………..........................:1.25 << MORE For 4.27Ghz, try 1.325-1.425
    CPU Termination…..... 1.200V*...........:1.24 << Try 1.28-1.34
    CPU PLL…………………....1.500V*...............:1.5 << Set 1.58
    CPU Referen.…………....0.755V*.............:Auto
    CPU Reference2………,,0.800V*..............:

    MCH/ICH
    MCH Core…………….....1.100V................:1.24 << May need 1.26-1.3 for 8GB
    MCH Reference….…….0.760V................:Auto
    MCH/DRAM Ref.…......0.900V..............:Auto
    ICH I/O……………….....1.500V................:1.5
    ICH Core…………...……1.100V.................:1.2

    DRAM
    DRAM Voltage ……....1.800V...............:2.0 << 2.1-2.15
    DRAM Termination .…0.900V...............:Normal
    Channel A Reference 0.900V..............:Normal
    Channel B Reference 0.900V..............:Normal

    Advanced Settings
    Limit CPUID Max. to 3...................:Disabled
    No-Execute Memory Protect...............:Enabled
    CPU Enhanced Halt (C1E).................:Disabled
    C2/C2E State Support....................:Didabled
    x C4/C4E State Support..................:Disabled
    CPU Thermal Monitor 2(TM2) .............:Enabled
    CPU EIST Function.......................:Disabled
    Virtualization Technology...............:Disabled

    Integrated Peripherals
    Legacy USB Storage Detect ..............:Disabled

  5. #5
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: TEMPLATE for 4.27GHz EP45-UD3p

    LSD, I just realized this isn't the same mobo and processor I did the 4.27GHz on.Back in Sept. I bricked that mobo flashing the BIOS.Yeah,I managed to do everything you say not what to do when flashing BIOS.But that was before I found this WEB SITE.Computer shop had me RMA processor but ended up being mobo.I don't believe the BATCH this processor come from is going to let me do 4.27GHz.The other mobo and processor did 4.27GHz on the first attempt.I tried your settings up and down - back and forth.No Luck.I sure do appreciate your help.
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  6. #6
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: TEMPLATE for 4.27GHz EP45-UD3p

    I finally got it to run 4.27.I'm sorry it took so long.I run prime95 for 2 hrs. just to see if it would crash.No errors.When I get home from work I'll run memtest.Then I'll send you a copy of my BIOS settings.I'm sure it will need adjustments.THANK YOU again for your help.
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  7. #7
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: TEMPLATE for 4.27GHz EP45-UD3p

    Cool, great to hear you got it going. Ya, when you get time and if you need it, give me your settings and explain the issue and I will advise back

  8. #8
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: TEMPLATE for 4.27GHz EP45-UD3p

    I ran memtest86+ v4.0 for 2 passes (no errors).I ran Prime95 Blend for 2 hrs. (no errors).
    CPUID MW Monitor
    Idle Load
    CPU Vcore 1.38 1.38
    DDR 2.10 2.10
    System 34c 34c
    CPU 31c 55-61
    CPUZ
    Core Speed 4.275.1 MHz
    Bus Speed 450.0 MHz
    Rated FSB 1800.0 MHZ
    DRAM Frequency 540.0
    I just want to know if you see any ajustments I may need to make before I get serious about stress testing.I just don't want to waste time stressing if my settings need adjusted.By the way - I think it was my Vcore setting that was holding back from running 4.27GHz.I went from 1.375 to 1.4 Vcore (with all other settings the same)and it accepted it.THANKS AGAIN - Here's my BIOS settings.
    Robust Graphics Booster ...................:Auto
    CPU Clock Ratio ...........................:9x
    Fine CPU Clock Ratio.......................:+0.5
    CPU Frequency .............................:4.27GHz (450x9.5)
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.....................:Enabled
    CPU Host Frequency (Mhz) ..................:450
    PCI Express Frequency (Mhz) ...............:100
    C.I.A.2 ...................................:Disabled
    Advanced Clock Control [Press Enter]
    CPU Clock Drive............................:800
    PCI Express Clock Drive....................:900
    CPU Clock Skew (ps)........................:0ps
    MCH Clock Skew (ps)........................:0ps
    DRAM Performance Control
    Performance Enhance........................:Standard
    Extreme Memory Profile (X.M.P.)............:Disabled
    (G)MCH Frequency Latch.....................:Auto
    System Memory Multiplier ..................:2.40B
    Memory Frequency (Mhz) ....................:1080
    DRAM Timing Selectable ....................:Manual
    Standard Timing Control
    CAS Latency Time...........................:5
    tRCD ......................................:5
    tRP'.......................................:5
    tRAS.......................................:18
    Advanced Timing Control
    tRRD.......................................:5
    tWTR.......................................:8
    tWR........................................:10
    tRFC.......................................:85
    tRTP.......................................:8
    Command Rate (CMD) ........................:2
    Driving Strength Profiles
    Driving Strength ..........................:1066
    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment.....................:Auto
    tRD Phase1 Adjustment......................:Auto
    tRD Phase2 Adjustment ....................:Auto
    tRD Phase3 Adjustment.....................:Auto
    Trd2rd(Different Rank).....................:Auto
    Twr2wr(Different Rank).....................:Auto
    Twr2rd(Different Rank).....................:Auto
    Trd2wr(Same/Diff Rank).....................:Auto
    Dimm1 Clock Skew Control...................:Auto ps
    Dimm2 Clock Skew Control...................:Auto ps
    Channel B
    Static tRead Value.........................:9
    tRD Phase0 Adjustment.....................:Auto
    tRD Phase1 Adjustment......................:Auto
    tRD Phase2 Adjustment ....................:Auto
    tRD Phase3 Adjustment.....................:Auto
    Trd2rd(Different Rank).....................:Auto
    Twr2wr(Different Rank).....................:Auto
    Twr2rd(Different Rank).....................:Auto
    Trd2wr(Same/Diff Rank).....................:Auto
    Dimm1 Clock Skew Control...................:Auto ps
    Dimm2 Clock Skew Control...................:Auto ps
    Motherboard Voltage Control
    CPU
    Load-Line Calibration......................:Enabled
    CPU Vcore….……….............................:1.4
    CPU Termination…..... 1.200V*..............:1.38
    CPU PLL…………………....1.500V*..................:1.5
    CPU Referen.…………....0.755V*................:Auto
    CPU Reference2………,,0.800V*.................:
    MCH/ICH
    MCH Core…………….....1.100V...................:1.26
    MCH Reference….…….0.760V...................:Auto
    MCH/DRAM Ref.…......0.900V.................:Auto
    ICH I/O……………….....1.500V...................:1.5
    ICH Core…………...……1.100V....................:1.2
    DRAM
    DRAM Voltage ……....1.800V..................:2.1
    DRAM Termination .…0.900V..................:Normal
    Channel A Reference 0.900V.................:Normal
    Channel B Reference 0.900V.................:Normal
    Advanced Settings
    Limit CPUID Max. to 3......................:Disabled
    No-Execute Memory Protect..................:Enabled
    CPU Enhanced Halt (C1E)....................:Disabled
    C2/C2E State Support.......................:Disabled
    x C4/C4E State Support.....................:Disabled
    CPU Thermal Monitor 2(TM2) ................:Enabled
    CPU EIST Function..........................:Disabled
    Virtualization Technology..................:Disabled
    Integrated Peripherals
    Legacy USB Storage Detect .................:Disabled
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  9. #9
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: TEMPLATE for 4.27GHz EP45-UD3p

    I did a little tweaken last night - I put current BIOS settings below.With these settings I ran Prime 95 Blend for 3 hrs./I ran Memtest86 4 passes/I ran OCCT 2 times.All with no errors.I did the IBT/ET6 GFlop test to confirm my Vcore setting of (1.36875).I could not get Vtt any lower than (1.36).The settings I'm concerned with are - tRAS - Static tRead Value - CPU PLL - Are they OK??? After I do a little more research - I want to jump into MCH Reference,or should I leave that alone?I can't THANK YOU enough for your help.
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...................:Fast
    CPU Clock Ratio ...........................:9x
    Fine CPU Clock Ratio.......................:+0.5
    CPU Frequency .............................:4.27GHz (450x9.5)
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control.....................:Enabled
    CPU Host Frequency (Mhz) ..................:450
    PCI Express Frequency (Mhz) ...............:100
    C.I.A.2 ...................................:Disabled
    Advanced Clock Control [Press Enter]
    CPU Clock Drive............................:800
    PCI Express Clock Drive....................:900
    CPU Clock Skew (ps)........................:0ps
    MCH Clock Skew (ps)........................:0ps
    DRAM Performance Control
    Performance Enhance........................:Standard
    Extreme Memory Profile (X.M.P.)............:Disabled
    (G)MCH Frequency Latch.....................:Auto
    System Memory Multiplier ..................:2.40B
    Memory Frequency (Mhz) ....................:1080
    DRAM Timing Selectable ....................:Manual
    Standard Timing Control
    CAS Latency Time...........................:5
    tRCD ......................................:5
    tRP'.......................................:5
    tRAS.......................................:18
    Advanced Timing Control
    tRRD.......................................:4
    tWTR.......................................:8
    tWR........................................:10
    tRFC.......................................:82
    tRTP.......................................:5
    Command Rate (CMD) ........................:2
    Driving Strength Profiles
    Driving Strength ..........................:1066
    Channel A
    Static tRead Value.........................:8
    tRD Phase0 Adjustment.....................:Auto
    tRD Phase1 Adjustment......................:Auto
    tRD Phase2 Adjustment ....................:Auto
    tRD Phase3 Adjustment.....................:Auto
    Trd2rd(Different Rank).....................:Auto
    Twr2wr(Different Rank).....................:Auto
    Twr2rd(Different Rank).....................:Auto
    Trd2wr(Same/Diff Rank).....................:Auto
    Dimm1 Clock Skew Control...................:Auto ps
    Dimm2 Clock Skew Control...................:Auto ps
    Channel B
    Static tRead Value.........................:8
    tRD Phase0 Adjustment.....................:Auto
    tRD Phase1 Adjustment......................:Auto
    tRD Phase2 Adjustment ....................:Auto
    tRD Phase3 Adjustment.....................:Auto
    Trd2rd(Different Rank).....................:Auto
    Twr2wr(Different Rank).....................:Auto
    Twr2rd(Different Rank).....................:Auto
    Trd2wr(Same/Diff Rank).....................:Auto
    Dimm1 Clock Skew Control...................:Auto ps
    Dimm2 Clock Skew Control...................:Auto ps
    Motherboard Voltage Control
    CPU
    Load-Line Calibration......................:Enabled
    CPU Vcore….……….............................:1.36875
    CPU Termination…..... 1.200V*..............:1.36
    CPU PLL…………………....1.500V*..................:1.5
    CPU Referen.…………....0.755V*................:Auto
    CPU Reference2………,,0.800V*.................:
    MCH/ICH
    MCH Core…………….....1.100V...................:1.26
    MCH Reference….…….0.760V...................:Auto
    MCH/DRAM Ref.…......0.900V.................:Auto
    ICH I/O……………….....1.500V...................:1.5
    ICH Core…………...……1.100V....................:1.2
    DRAM
    DRAM Voltage ……....1.800V..................:2.1
    DRAM Termination .…0.900V..................:Normal
    Channel A Reference 0.900V.................:Normal
    Channel B Reference 0.900V.................:Normal
    Advanced Settings
    Limit CPUID Max. to 3......................:Disabled
    No-Execute Memory Protect..................:Enabled
    CPU Enhanced Halt (C1E)....................:Disabled
    C2/C2E State Support.......................:Disabled
    x C4/C4E State Support.....................:Disabled
    CPU Thermal Monitor 2(TM2) ................:Enabled
    CPU EIST Function..........................:Disabled
    Virtualization Technology..................:Disabled
    Integrated Peripherals
    Legacy USB Storage Detect .................:Disabled
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: TEMPLATE for 4.27GHz EP45-UD3p

    tRD may stay stable at that FSB since you are using B memory multi's but you may need to switch to D multis and 9 tRD if you get instabilty.

    As for the rest, many of those memory timings can be lowered, let me know if you are unsure and need advice on that

    PLL is fine, but you could maybe use a bit more. It is not always needed, but can help

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •