Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: RAM timings on P55 UD6




  1. #11
    Join Date
    Mar 2009
    Posts
    56

    Default Re: RAM timings on P55 UD6

    I have too a problem with P55 UD6 & G.skill memory 2x2gb 16000.When i set in bios these settings:
    Advanced Frequency Settings:

    CPU Clock Ratio 17x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[Disabled]
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Enabled]
    CPU Enhanced Halt (C1E)..................[Disabled]
    C3/C6/C7 State Support...................[Disabled]
    CPU Thermal Monitor......................[Enabled]
    CPU EIST Function........................[Disabled]
    Bi-Directional PROCHOT...................[Enabled]

    QPI Clock Ratio..........................[x36]
    QPI Link Speed........................[x]
    Uncore Clock Ratio....................[18x]
    Uncore Frequency.........................3600MHz

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Enabled]
    BCLK Frequency ..........................[167]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[12x]
    Memory Frequency (MHz)................2004
    PCI Express Frequency (MHz)..............[100]
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[12.0]
    Memory Frequency (MHz)................2004
    Performance Enhance (SPD)............. [Standard]
    DRAM Timing Selectable (SPD)............ [Expert]
    Profile DDR Voltage ..................
    Profile QPI Voltage ..................
    Channel Interleaving.....................[Auto]
    Rank Interleaving........................[Auto]

    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[9]
    tRCD....................................[9]
    tRP.....................................[9]
    tRAS...................................[27]

    >>>>> Advanced Timing Control

    tRC....................................[Auto]
    tRRD...................................[Auto]
    tWTR...................................[Auto]
    tWR....................................[Auto]
    tWTP...................................[Auto]
    tWL....................................[Auto]
    tRFC...................................[Auto]
    tRTP...................................[Auto]
    tFAW...................................[Auto]
    Command Rate (CMD).................. 1 [1]

    >>>>> Misc Timing Control

    B2B Cas Delay..........................[Auto]
    Round Trip Latency.....................[Auto]

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[Level 2]
    CPU Vcore..................1.19375v..[Normal]
    QPI/VTT Voltage..........1.100v.....[1.20v]

    >>> MCH/ICH
    PCH Core....................1.050v.....[1.05]
    CPU PLL......................1.800v.....[1.8]

    >>> DRAM
    DRAM Voltage..............1.500v.....[1.660v]
    DRAM Termination.........0.750v.....[0.88]
    Ch-A Data VRef............0.750v.....[0.88]
    Ch-A Data VRef............0.750v.....[0.88]
    Ch-B Data VRef............0.750v.....[0.88]
    Ch-B Data VRef............0.750v.....[0.88]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Detect ....................[Disabled] Located In Integrated Peripherals Page
    My system start and when i play some divX movie the picture freeze.When i set everything in CMOS to default everything is ok=
    Last edited by tonus; 01-09-2010 at 04:29 PM.
    i7-860(20x200)1.3v,Phanteks+3xTR TY-141, P55-UD6 F11d,G.Skill Trident PC 16000 9-9-9-27 1.6v 2x2 gb,Sapphire 7850 2gb OC, SSD Samsung 840pro 128gb,2x1TB WD BLUE 64MB SATA3 WD10EZEX,850W Seasonic M12 II Bronze SS-850AM, LG M2352D-PZ.

  2. #12
    Join Date
    Dec 2009
    Location
    sweden
    Posts
    10

    Default Re: RAM timings on P55 UD6

    Quote Originally Posted by Kyle XY View Post
    Hello !

    I have the same MB and my current Corsair 2*2Gb CM3X2048-1600C7DHX designed to run under 1600MHz for 1.9V can only run under 1080MHz for 1.65V (it is not present on http://www.gigabyte.com.tw/FileList/...ga-p55-ud6.pdf).
    I'm looking for new RAM modules which are more compatible with P55-UD6, and your RAM is very interesting, even it seems not to be officially compatible. Can you tell me your BIOS version ?

    Thanks !
    Hi, my current BIOS version is F5e. I have to say that I am very satisfied with my RAM modules, I can warmly recommend them, maybe get 2 modules of 2 Gb each so you can squeeze the most of them, getting larger amount of RAM will lead to timings issues (if you are intending to overclock, of course) otherwise I am using my 4 modules at stock speed 1600 Mhz with 7-7-7-20 timings at 1,65 V, not too bad ;-)

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •