Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: trouble with gigabyte ep45 ud3r,bsod ram related




  1. #11
    Join Date
    Dec 2009
    Location
    Italy
    Posts
    9

    Default Re: trouble with gigabyte ep45 ud3r,bsod ram related

    page_fault_in_nonpaged_area
    0x00000050

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: trouble with gigabyte ep45 ud3r,bsod ram related

    That is memory, can you post a link to the set your are using so we can be sure of voltages.

    Make these changes, and if you know the spec voltage set that amount

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9x
    Fine CPU Clock Ratio.....................:.0.0
    CPU Frequency ...........................: 3 ghz(333x9)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 333 Mhz
    PCI Express Frequency (Mhz) .........:Auto

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0 ps
    MCH Clock Skew (ps)...................: 0 ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: missing
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: Auto << Set 2.40B
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18

    Advanced Timing Control
    tRRD...........................................Aut o (3)
    tWTR..........................................Auto (3)
    tWR............................................Aut o (6)
    tRFC...........................................Aut o (52)
    tRTP...........................................Aut o (3)
    Command Rate (CMD) ....................:(Auto) << Set 2T

    Driving Strength Profiles
    Driving Strength ............................Auto << Set to ram speed, or one above is usually better

    Channel A
    Static tRead Value.........................:Auto << Set manually to 7-8 for now
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:10 << Set manually to 7-8 for now (Both A & B must match)
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control

    CPU
    CPU Vcore….……….........................:Auto
    CPU Termination…..... 1.200V*.......:Auto << Set 1.225 for now
    CPU PLL…………………....1.500V*.......:Auto
    CPU Referen.…………....0.755V*.......:Auto
    CPU Reference2………,,0.800V*.......:Missing

    MCH/ICH
    MCH Core…………….....1.100V...........: Auto << If using 4GB set 1.20-1.24. Also try less than stock, with any amount as some boards need this for some reason. Like 1.0-1.1
    MCH Reference….…….0.760V...........; Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.500V............: Auto
    ICH Core…………...……1.100V............: Auto

    DRAM
    DRAM Voltage ……....1.800V............: Auto << Set to your ram spec, normally 2.0-2.1
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............:

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled]

  3. #13
    Join Date
    Dec 2009
    Location
    Italy
    Posts
    9

    Default Re: trouble with gigabyte ep45 ud3r,bsod ram related

    Ok,i am using exactly the above settings.For values to be chosen, I selected:

    Driving Strength ............................800
    Static tRead Value.........................:8
    MCH Core…………….....1.100V...........:Auto for now
    DRAM Voltage ……....1.800V............:1.8

    With these settings nothing changed,the system is still stable unless i open a pdf file...
    I will even try to lower the mch core and to raise to 1066 the driving strenght according to you.

    However, I have to comment on this matter....i think that corsair ram was faulty (both sticks, not that much probable but not impossible ) and caused many bsods,and probably these bsods screwed up something in my windows installation,that is why i am now experiencing crashes with kingstone memory when opening a pdf file...if i am right,the motherboard is ok(as you said) and i only have to get the corsair ram replaced. What do you think about it?is it possible?

    ps:
    Kingstone stick's datasheet can be found here(not very useful anyway...):
    Kingston Technology Company - Kingston Memory Search - Search Results for: KVR800D2N5/1G
    Strangely enough,i did not find the datasheet of the corsair sticks on the corsair site,nor a page with their specification on the internet,but there is written on them they need 2.1 volt and they are rated 5-5-5-15 at 1066 mhz...

  4. #14
    Join Date
    Dec 2009
    Location
    israel
    Posts
    1

    Smile The Bsod Sparperetor is because.....

    Gigabyte ud3l , ud3r have the same issue in ram

    i have ud3l the same p45 chip like the ud3r

    my pc -
    motherboard |Gigabyte : p45ud3l cpu : intel q9400
    Pcpower - 500w
    ati radeon 4770 512mb
    crosair 2X1 1066 cl5
    i have try to install 2X2gb patriot extreme and guess??
    almost 4 ,5 minutes blue screen
    i take this 4gb patriot to another computer (c2d 7500 ,gigabyte p35 ds4)
    boom work great (great? wowww win 7 is on + vmware and win7 = 2 win 7 !!) ram is get 7.2 in score (win7 expirence rate)
    so dude the problem is the mainboard i send mail to gigabyte
    they say: blablabla change the bios to default,replace the ram ....)
    well the problem is the mainboard p45 has ram moudle that is not flex
    and maybee its 100 or 1000 mainboard with this problem bad series

  5. #15
    Join Date
    Dec 2009
    Location
    Italy
    Posts
    9

    Default Re: The Bsod Sparperetor is because.....

    Quote Originally Posted by asiasi2 View Post
    Gigabyte ud3l , ud3r have the same issue in ram

    i have ud3l the same p45 chip like the ud3r

    my pc -
    motherboard |Gigabyte : p45ud3l cpu : intel q9400
    Pcpower - 500w
    ati radeon 4770 512mb
    crosair 2X1 1066 cl5
    i have try to install 2X2gb patriot extreme and guess??
    almost 4 ,5 minutes blue screen
    i take this 4gb patriot to another computer (c2d 7500 ,gigabyte p35 ds4)
    boom work great (great? wowww win 7 is on + vmware and win7 = 2 win 7 !!) ram is get 7.2 in score (win7 expirence rate)
    so dude the problem is the mainboard i send mail to gigabyte
    they say: blablabla change the bios to default,replace the ram ....)
    well the problem is the mainboard p45 has ram moudle that is not flex
    and maybee its 100 or 1000 mainboard with this problem bad series
    you have trouble with both corsair and patriot memory?
    you could try with the same kingstone memory that i am using,the system is running quite fine with it.
    Moreover i will send corsair sticks in rma. As soon as i get them back,i will try to see if there is incompatibility between ram and mobo and i will tell you...

  6. #16
    Join Date
    Dec 2009
    Location
    Italy
    Posts
    9

    Default Re: trouble with gigabyte ep45 ud3r,bsod ram related

    i know this is necroposting, but back then i was too lazy to post the solution of the enigma(or i simply forgot to do it)...so i'm doing it right now, maybe it can still be useful to someone, who knows?


    Well,the problem was definitely not che motherboard, but two screwed-up memory modules at the same time. How high are the
    probabilities to have two screwed-up memory modules at the same time? very low i think. But this is what happened to me:two defective memory modules at the same time.
    To make things even harder,they were defective in a weird way: you could run memtest for 1 hour with 0 errors, and then you could repeat it after a moment and fail in 1 second with thousands of errors.


    I sent the two modules in rma,after a while i got two new ones and installed them...booom problem solved!


    So the motherboard was ok and it is still running fine nowadays(now i'm posting from that pc :) )
    I must say i'm very satisfied with this gigabyte ep45-ud3r...my next motherboard will be very likely another gigabyte :)


    See you!

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •