Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: EX58-UD5 i7 920 connection pads & socket 1366 pins




  1. #1
    Join Date
    Dec 2009
    Location
    Tuvalu
    Posts
    21

    Post EX58-UD5 i7 920 connection pads & socket 1366 pins

    I canít get stable my system with 12Gb RAM Kingston KVR1333D3N9/2G X6= 12Gb 1,5v.

    With only 2Gb at DDR3_1 or DDR3_3 system is stable (IntelBurnTest v2.3 10 pass successful for every one of 6 dimms).

    The system has always been detecting all of my 12Gb RAM during post and on Windows System, CPUz or ET6.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>

    I canít even get stable at 800Mhz (9,10,10,22 DRAM Voltage:1,6v QPI/Vtt Voltage: 1,6v CPU PLL:1,880v CPU Vcore: 1,55v).<o:p></o:p>
    <o:p></o:p>

    Searching trough the forum I found this Thread -X58A-UD7 & 12GB ram problem-.<o:p></o:p>
    Resettling the cpu did seem to fix the 12 Gb problem for a user.<o:p></o:p>
    So Iíve tried my self.<o:p></o:p>

    You can see the CPU on the images.<o:p></o:p>








    It seems that around 28 of the connection pads on the processor have marginal or non existent contact with the socket 1366 pins.<o:p></o:p>

    Anyway I installed back mu CPU but noting changed for the better or worse.
    <o:p></o:p>
    <o:p></o:p>
    Any ideas?
    Thanks
    ____________________________________

    System Setup:<o:p></o:p>
    Gigabyte GA-EX58-UD5 (rev. 1.0)<o:p></o:p>
    BIOS: F9k<o:p></o:p>
    Intel Core I7-920 C0<o:p></o:p>
    NOCTUA NH-U12P SE1366<o:p></o:p>
    Kingston KVR1333D3N9/2G X6= 12Gb<o:p></o:p>
    SAPPHIRE HD 4870 1GB TOXIC Edition<o:p></o:p>
    500GB HDD<o:p></o:p>
    PSU 750W<o:p></o:p>
    Win 7 64-bit

  2. #2

    Default Re: EX58-UD5 i7 920 connection pads & socket 1366 pins

    no picture shown

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EX58-UD5 i7 920 connection pads & socket 1366 pins

    What cooler are you using, maybe it is not tight enough as I have not seen this ever on X58. Be sure you make it tight as you can

    12GB show in taskmanager right and no N/A in the BIOS on memory channels? Just checking


    Some pins may not need contact, but they all should. If your seeing 12GB in taskmanager and NO N/A in the BIOS on memory channels then you are fine.

    You may just need to find the right settings, and pushing voltages as high as you have suggested may not be the way to do that. Please give me the current settings you are trying and I will advise back

  4. #4
    Join Date
    Dec 2009
    Location
    Tuvalu
    Posts
    21

    Default Re: EX58-UD5 i7 920 connection pads & socket 1366 pins

    Sorry fore the wrong setting for the images.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    Now itís fixed.<o:p></o:p>

    The temperatures at stok settings are around: 30 Ė 35C Idle and 58 Ė 62C during IntelBurnTest.<o:p></o:p>

    12Gb of RAM is appearing on Task Manager and every other user interface capable of displaying RAM.<o:p></o:p>
    <o:p></o:p>
    <o:p>
    I will check the cooler again.
    I will post my current settings later.
    <o:p></o:p>
    Thank you.

    </o:p>

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EX58-UD5 i7 920 connection pads & socket 1366 pins

    Sounds all good then to me.

    If you are having issues please explain them in detail and give us your settings once you get time to do so and we will advise back.

  6. #6
    Join Date
    Dec 2009
    Location
    Tuvalu
    Posts
    21

    Default Re: EX58-UD5 i7 920 connection pads & socket 1366 pins

    After some research on http://download.intel.com/design/processor/datashts/320834.pdf and some tracking - mapping of the connection pads on the processor (if am not making some mistake on tracking - mapping) the ones that have marginal or non existent contact are the following:<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    <o:p> </o:p>
    Land No. Pin Name Buffer Type Direction <o:p></o:p>
    A39 VSS GND<o:p></o:p>
    AB35 VTTPWRGOOD Asynch I<o:p></o:p>
    AD36 VTTD PWR<o:p></o:p>
    AE36 VTT_SENSE Analog<o:p></o:p>
    AE37 VSS_SENSE_VTT Analog<o:p></o:p>
    AG36 SKTOCC# GTL O<o:p></o:p>
    AH36 PECI Asynch I/O<o:p></o:p>
    AK1 RSVD<o:p></o:p>
    AM4 RSVD<o:p></o:p>
    AN3 VSS GND<o:p></o:p>
    AN36 RSVD<o:p></o:p>
    AN4 RSVD<o:p></o:p>
    AP37 VSS GND<o:p></o:p>
    L25 DDR2_MA[8] CMOS O<o:p></o:p>
    L27 DDR2_CKE[3] CMOS O<o:p></o:p>
    L29 VSS GND<o:p></o:p>
    M29 VCC PWR<o:p></o:p>
    N29 -Not Listed- ?<o:p></o:p>
    P28 -Not Listed- ?<o:p></o:p>
    R27 -Not Listed- ?<o:p></o:p>
    R28 -Not Listed- ?<o:p></o:p>
    T28 -Not Listed- ?<o:p></o:p>
    U30 -Not Listed- ?<o:p></o:p>
    U31 -Not Listed- ?<o:p></o:p>
    V31 -Not Listed- ?<o:p></o:p>
    <o:p> </o:p>
    The fact that no clear trace of contact with the socket pins in the above connection pads does it mean that there is no contact at all?<o:p></o:p>
    Is there a possibility that there might be some considerable wear or even damage to the CPU by this situation?<o:p></o:p>

  7. #7
    Join Date
    Dec 2009
    Location
    Tuvalu
    Posts
    21

    Default Re: EX58-UD5 i7 920 connection pads & socket 1366 pins

    BIOS Settings
    <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    <o:p></o:p>
    NOT STABLE<o:p></o:p>
    Advanced CPU Features:<o:p></o:p>
    CPU Clock Ratio ................................ [20x]<o:p></o:p>
    Intel(R) Turbo Boost Tech .................. [Enabled]<o:p></o:p>
    CPU Cores Enabled ............................ [All]<o:p></o:p>
    CPU Multi Threading .......................... [Enabled]<o:p></o:p>
    CPU Enhanced Halt (C1E) ................... [Enabled]<o:p></o:p>
    C3/C6/C7 State Support .................... [Enabled]<o:p></o:p>
    CPU Thermal Monitor ......................... [Enabled]<o:p></o:p>
    CPU EIST Function ............................ [Enabled]<o:p></o:p>
    Virtualization Technology ................... [Disabled]<o:p></o:p>
    Bi-Directional PROCHOT ..................... [Enabled]<o:p></o:p>
    Uncore & QPI Features:<o:p></o:p>
    QPI Link Speed .............................. [x36]<o:p></o:p>
    Uncore Frequency .......................... [x21]<o:p></o:p>
    Isonchronous Frequency ..................[Enabled]<o:p></o:p>
    Standard Clock Control:<o:p></o:p>
    Base Clock (BCLK) Control ................ [Enabled]<o:p></o:p>
    BCLK Frequency (MHz) ..................... [133]<o:p></o:p>
    PCI Express Frequency (MHz) ........... [100]<o:p></o:p>
    <o:p></o:p>
    C.I.A.2 [Disabled]<o:p></o:p>
    <o:p></o:p>
    Advanced Clock Control:<o:p></o:p>
    CPU Clock Drive ..............................[800mV]<o:p></o:p>
    PCI Express Clock Drive ................... [900mV]<o:p></o:p>
    CPU Clock Skew ............................. [0ps]<o:p></o:p>
    IOH Clock Skew ............................. [0ps]<o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    Advanced DRAM Features:<o:p></o:p>
    Performance Enhance ...................... [Standard]<o:p></o:p>
    Extreme Memory Profile (X.M.P) ......... [Disabled]<o:p></o:p>
    System Memory Multiplier (SPD) ........ [10]<o:p></o:p>
    DRAM Timing Selectable (SPD) .......... [Expert]<o:p></o:p>
    <o:p></o:p>
    Channel A + B + C<o:p></o:p>
    <o:p></o:p>
    Channel A Timing Settings:<o:p></o:p>
    ##Channel A Standard Timing Control##<o:p></o:p>
    CAS Latency Time ...................... 9<o:p></o:p>
    tRCD ....................................... 10 <o:p></o:p>
    tRP ......................................... 10<o:p></o:p>
    tRAS ....................................... 25<o:p></o:p>
    <o:p></o:p>
    ##Channel A Advanced Timing Control##<o:p></o:p>
    tRC ........................................ 35<o:p></o:p>
    tRRD ....................................... [Auto]<o:p></o:p>
    tWTR ...................................... [Auto]<o:p></o:p>
    tWR ........................................[Auto]<o:p></o:p>
    tWTP ....................................... [Auto]<o:p></o:p>
    tWL ........................................ 7<o:p></o:p>
    tRFC .......................................[Auto]<o:p></o:p>
    tRTP .......................................[Auto]<o:p></o:p>
    tFAW ......................................[Auto]<o:p></o:p>
    Command Rate (CMD) ................ 2<o:p></o:p>
    <o:p></o:p>##Channel A Misc Timing Control##<o:p></o:p>
    Round Trip Latency ................... [Auto]<o:p></o:p>
    Advanced Voltage Control:<o:p></o:p>
    <o:p></o:p>
    CPU<o:p></o:p>
    Load Line Calibration ................. [Enabled]<o:p></o:p>
    CPU Vcore ............................... 1.32500v<o:p></o:p>
    QPI/VTT Voltage 1.150v ............ 1,280v<o:p></o:p>
    CPU PLL 1.800v ....................... 1.800v<o:p></o:p>
    <o:p></o:p>
    MCH/ICH<o:p></o:p>
    PCIE 1.500v ........................... 1.500v<o:p></o:p>
    QPI PLL 1.100v ....................... 1.100v<o:p></o:p>
    IOH Core 1.100v ..................... 1.100v<o:p></o:p>
    ICH I/O 1.500v ....................... 1.500v<o:p></o:p>
    ICH Core 1.1v ........................ 1.100v<o:p></o:p>
    <o:p></o:p>
    DRAM<o:p></o:p>
    DRAM Voltage 1.500v .............. 1.540v<o:p></o:p>
    DRAM Termination 0.750v [0.770v]<o:p></o:p>
    Ch-A Data VRef. 0.750v [0.770v]<o:p></o:p>
    Ch-B Data VRef. 0.750v [0.770v]<o:p></o:p>
    Ch-C Data VRef. 0.750v [0.770v]<o:p></o:p>
    Ch-A Address VRef. 0.750v [0.770v]<o:p></o:p>
    Ch-B Address VRef. 0.750v [0.770v]<o:p></o:p>
    Ch-C Address VRef. 0.750v [0.770v]<o:p></o:p>
    <o:p></o:p>

    DES off<o:p></o:p>
    57-58C<o:p></o:p>
    IntelBurnTest 3laps (4Gb) Fails
    Last edited by Giuseppe Verdi; 12-13-2009 at 08:19 AM.
    Gigabyte GA-EX58-UD5 (rev. 1.0), BIOS: F12
    Intel Core I7-920 C0,NOCTUA NH-U12P SE1366
    Kingston KVR1333D3N9/2G X6= 12Gb
    SAPPHIRE HD 4870 1GB TOXIC Edition
    500GB HDD, PSU Sea Sonic M12D-750W, Win 7 64-bit

  8. #8
    Join Date
    Dec 2009
    Location
    Tuvalu
    Posts
    21

    Default Re: EX58-UD5 i7 920 connection pads & socket 1366 pins

    STABLE<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    <o:p></o:p>
    Advanced CPU Features:<o:p></o:p>
    CPU Clock Ratio ................................ [20x]<o:p></o:p>
    Intel(R) Turbo Boost Tech .................. [Enabled]<o:p></o:p>
    CPU Cores Enabled ............................ [All]<o:p></o:p>
    CPU Multi Threading .......................... [Disabled]<o:p></o:p>
    CPU Enhanced Halt (C1E) ................... [Enabled]<o:p></o:p>
    C3/C6/C7 State Support .................... [Enabled]<o:p></o:p>
    CPU Thermal Monitor ......................... [Enabled]<o:p></o:p>
    CPU EIST Function ............................ [Enabled]<o:p></o:p>
    Virtualization Technology ................... [Disabled]<o:p></o:p>
    Bi-Directional PROCHOT ..................... [Enabled]<o:p></o:p>
    Uncore & QPI Features:<o:p></o:p>
    QPI Link Speed .............................. [x36]<o:p></o:p>
    Uncore Frequency .......................... [x21]<o:p></o:p>
    Isonchronous Frequency ..................[Enabled]<o:p></o:p>
    Standard Clock Control:<o:p></o:p>
    Base Clock (BCLK) Control ................ [Enabled]<o:p></o:p>
    BCLK Frequency (MHz) ..................... [133]<o:p></o:p>
    PCI Express Frequency (MHz) ........... [100]<o:p></o:p>
    <o:p></o:p>
    C.I.A.2 [Disabled]<o:p></o:p>
    <o:p></o:p>
    Advanced Clock Control:<o:p></o:p>
    CPU Clock Drive ..............................[800mV]<o:p></o:p>
    PCI Express Clock Drive ................... [900mV]<o:p></o:p>
    CPU Clock Skew ............................. [0ps]<o:p></o:p>
    IOH Clock Skew ............................. [0ps]<o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    Advanced DRAM Features:<o:p></o:p>
    Performance Enhance ...................... [Standard]<o:p></o:p>
    Extreme Memory Profile (X.M.P) ......... [Disabled]<o:p></o:p>
    System Memory Multiplier (SPD) ........ [10]<o:p></o:p>
    DRAM Timing Selectable (SPD) .......... [Expert]<o:p></o:p>
    <o:p></o:p>
    Channel A + B + C<o:p></o:p>
    <o:p></o:p>
    Channel A Timing Settings:<o:p></o:p>
    ##Channel A Standard Timing Control##<o:p></o:p>
    CAS Latency Time ...................... 9<o:p></o:p>
    tRCD ....................................... 10 <o:p></o:p>
    tRP ......................................... 10<o:p></o:p>
    tRAS ....................................... 25<o:p></o:p>
    <o:p></o:p>
    ##Channel A Advanced Timing Control##<o:p></o:p>
    tRC ........................................ 35<o:p></o:p>
    tRRD ....................................... [Auto]<o:p></o:p>
    tWTR ...................................... [Auto]<o:p></o:p>
    tWR ........................................[Auto]<o:p></o:p>
    tWTP ....................................... [Auto]<o:p></o:p>
    tWL ........................................ 7<o:p></o:p>
    tRFC .......................................[Auto]<o:p></o:p>
    tRTP .......................................[Auto]<o:p></o:p>
    tFAW ......................................[Auto]<o:p></o:p>
    Command Rate (CMD) ................ 2<o:p></o:p>
    <o:p></o:p>
    ##Channel A Misc Timing Control##<o:p></o:p>
    Round Trip Latency ................... [Auto]<o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    <o:p></o:p>
    Advanced Voltage Control:<o:p></o:p>
    <o:p></o:p>
    CPU<o:p></o:p>
    Load Line Calibration ................. [Enabled]<o:p></o:p>
    CPU Vcore ............................... 1.30000v<o:p></o:p>
    QPI/VTT Voltage 1.150v ............ 1,280v<o:p></o:p>
    CPU PLL 1.800v ....................... 1.800v<o:p></o:p>
    <o:p></o:p>
    MCH/ICH<o:p></o:p>
    PCIE 1.500v ........................... 1.500v<o:p></o:p>
    QPI PLL 1.100v ....................... 1.100v<o:p></o:p>
    IOH Core 1.100v ..................... 1.100v<o:p></o:p>
    ICH I/O 1.500v ....................... 1.500v<o:p></o:p>
    ICH Core 1.1v ........................ 1.100v<o:p></o:p>
    <o:p></o:p>
    DRAM<o:p></o:p>
    DRAM Voltage 1.500v .............. 1.540v<o:p></o:p>
    DRAM Termination 0.750v [0.770v]<o:p></o:p>
    Ch-A Data VRef. 0.750v [0.770v]<o:p></o:p>
    Ch-B Data VRef. 0.750v [0.770v]<o:p></o:p>
    Ch-C Data VRef. 0.750v [0.770v]<o:p></o:p>
    Ch-A Address VRef. 0.750v [0.770v]<o:p></o:p>
    Ch-B Address VRef. 0.750v [0.770v]<o:p></o:p>
    Ch-C Address VRef. 0.750v [0.770v]

    <o:p></o:p>
    <o:p></o:p>
    DES off<o:p></o:p>
    57-58C<o:p></o:p>
    IntelBurnTest 5+10laps (4Gb) Pass

    <o:p></o:p>
    <o:p></o:p>
    The only thing not to have tried with BIOS settings is to disable C states, HT and Turbo. And it seems that disabling HT does work.<o:p></o:p>
    But at the end is it normal that at stock (ok besides 1333Mhz for the RAM) I can’t get stable with HT?

    <o:p></o:p>
    <o:p></o:p>
    Thank you.<o:p></o:p>
    Last edited by Giuseppe Verdi; 12-13-2009 at 08:21 AM. Reason: Uncore Frequency was listed -20- by mistake. Correct value -21-
    Gigabyte GA-EX58-UD5 (rev. 1.0), BIOS: F12
    Intel Core I7-920 C0,NOCTUA NH-U12P SE1366
    Kingston KVR1333D3N9/2G X6= 12Gb
    SAPPHIRE HD 4870 1GB TOXIC Edition
    500GB HDD, PSU Sea Sonic M12D-750W, Win 7 64-bit

  9. #9
    Join Date
    Dec 2009
    Location
    Tuvalu
    Posts
    21

    Default Re: EX58-UD5 i7 920 connection pads & socket 1366 pins

    With the RAM Voltages there is something strange. When setting DRAM voltage to 1.540v in BIOS in ET6 it indicates that the voltage is 1.520v, 0.020v less. With 1.500v ET6 indicates 1.480v. Every time 0.020v less. With DRAM Termination, Ch-X Data VRef. And Ch-A Address VRef. Whatever the setting is ET6 indicates the default 0.750v. This is happening at least with F7 and F9k and maybe with earlier as well. I have been using always the latest available version of ET6.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    Is this some kind of bug with ET6 or something else?<o:p></o:p>
    What is the real voltage on the board after all? The one in BIOS settings or the indicated by ET6?<o:p></o:p>
    <o:p> </o:p>
    There is considerable amount of DPClatency when either ET6 or Dynamic Energy Saver are enabled.<o:p></o:p>
    This has as result popís and clicks at the sound output.<o:p></o:p>
    I have tested this under all of the following circumstances:<o:p></o:p>
    <o:p> </o:p>
    1. On windows safe mode<o:p></o:p>
    2. After a clean fresh install (not upgrade) of windows with no additional drivers or software installed (no drivers besides what windows install during the OS installation procedure).<o:p></o:p>
    3. With Minimum system components (CPU, single memory, single HDD, VGA)<o:p></o:p>
    4. With as many devices as possible disabled from ďDevice ManagerĒ (even no mouse present)<o:p></o:p>
    5. With LAN and audio circuits disabled from BIOS.<o:p></o:p>
    6. With drivers installed from Gigabyte site exclusively (no VGA drive installed)<o:p></o:p>
    7. With the latest possible drivers from AMD (VGA), Intel (chipset), Realtek (Audio, LAN)<o:p></o:p>
    8. With BIOS F5, F6, F7, F9e or F9k.<o:p></o:p>
    <o:p> </o:p>
    When DES is not working AND ET6 is not running (both are not running in any way) there is no DPC Latency.<o:p></o:p>
    When one of DES or ET6, is running the DPC Latency appears.<o:p></o:p>
    Thank you.
    Gigabyte GA-EX58-UD5 (rev. 1.0), BIOS: F12
    Intel Core I7-920 C0,NOCTUA NH-U12P SE1366
    Kingston KVR1333D3N9/2G X6= 12Gb
    SAPPHIRE HD 4870 1GB TOXIC Edition
    500GB HDD, PSU Sea Sonic M12D-750W, Win 7 64-bit

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EX58-UD5 i7 920 connection pads & socket 1366 pins

    No marks on the pads does not always mean no contact is made. This issue is a P55 problem, not X58. So many people are worried now since the P55 issue, this is not X58 related so you are fine with the above images and really your memory is all showing up anyway so not sure why you are worried other than seeing the P55 issues maybe?

    Uninstall DES Please, thanks!

    Easytune and voltages. OK, there is two parts where you will see voltages. The HWmonitor tab shows actual voltages in use like CPU-z shows for Vcore. The Tuner/Advanced tab shows BIOS set voltages

    Termination and ref voltages are a percent of a setting, such as all the ones under the ram are .5% of Vdimm default 1.5. What easytune shows is this percent, so if you set 1.5 vdimm ref would show .75, even if you set 1.66 Vdimm ref would still show as .75 in easytune as this is the percentage amount, unless you manually adjust the percent before adjusting the vdimm.

    See the link in my signature about MCH ref and easytune, it's for P45 but it will help clear some of this up for you. All of those should be left in auto though and NOT manually set

    Real voltages are shown in Everest Ultimate in the Sensor tab


    DPC issues are always present with DES (And EIST And C1E), there is now way around this. Easytune is simple to work around, just do not keep it open while you are working on or listening to music.

    Try these for your unstable settings above

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Link Speed .............................. [x36] << can use x44 and it may be best
    Uncore Frequency .......................... [x21] << Try 20 or 22, some CPU's do not like Odd values here
    Isonchronous Frequency ..................[Enabled]
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... [133]
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [10]
    DRAM Timing Selectable (SPD) .......... [Expert]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 9
    tRCD ....................................... 9
    tRP ......................................... 9
    tRAS ....................................... 24

    ##Channel A Advanced Timing Control##
    tRC ........................................ 35 << AUTO
    tRRD ....................................... [Auto]
    tWTR ...................................... [Auto]
    tWR ........................................[Auto]
    tWTP ....................................... [Auto]
    tWL ........................................ 7 << AUTO
    tRFC .......................................[Auto]
    tRTP .......................................[Auto]
    tFAW ......................................[Auto]
    Command Rate (CMD) ................ 2 << Set 1T

    ##Channel A Misc Timing Control##
    Round Trip Latency ................... [Auto]

    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Enabled]
    CPU Vcore ............................... 1.32500v << Auto for no overclock
    QPI/VTT Voltage 1.150v ............ 1,280v << 1.3-1.4 for 12GB
    CPU PLL 1.800v ....................... 1.800v

    MCH/ICH
    PCIE 1.500v ........................... 1.500v
    QPI PLL 1.100v ....................... 1.100v << 1.14-1.24
    IOH Core 1.100v ..................... 1.100v << 1,24-1.28
    ICH I/O 1.500v ....................... 1.500v
    ICH Core 1.1v ........................ 1.100v << 1.14-1.2

    DRAM
    DRAM Voltage 1.500v .............. 1.540v << 1.66-1.7 for 12GB
    DRAM Termination 0.750v [0.770v] << AUTO
    Ch-A Data VRef. 0.750v [0.770v] << AUTO
    Ch-B Data VRef. 0.750v [0.770v] << AUTO
    Ch-C Data VRef. 0.750v [0.770v] << AUTO
    Ch-A Address VRef. 0.750v [0.770v] << AUTO
    Ch-B Address VRef. 0.750v [0.770v] << AUTO
    Ch-C Address VRef. 0.750v [0.770v] << AUTO

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •